This is an outdated version published on 2021-06-10. Read the most recent version.

Effects of reverse cold rolling on the microstructure, texture and mechanical properties of AA1100 aluminium alloys

Authors

  • O. Rivero Universidad de Córdoba. Departamento de ingeniería mecánica. Grupo ICT. Carrera 6 No. 77- 305 ZIP:230002, Montería - Córdoba, Colombia. Phone: +57(4)7860920
  • D. R. Pico Universidad de Córdoba. Departamento de ingeniería mecánica. Grupo ICT. Carrera 6 No. 77- 305 ZIP:230002, Montería - Córdoba, Colombia. Phone: +57(4)7860920
  • L. G. Castruita Universidad Autónoma de Coahuila; Facultad de Ingeniería Mecánica y Eléctrica, Av. Barranquilla S/N, Col. Guadalupe, Monclova 25750, México
  • F. García-Pastor CINVESTAV-IPN, Unidad Saltillo, Industria Metalúrgica 1062, Parque Industria Saltillo, Ramos Arizpe, Ramos Arizpe 25900, México
  • J. Unfried-Silgado Universidad Autónoma de Coahuila; Facultad de Ingeniería Mecánica y Eléctrica, Av. Barranquilla S/N, Col. Guadalupe, Monclova 25750, México

DOI:

https://doi.org/10.15282/jmes.15.2.2021.04.0629

Keywords:

Reverse cold rolling, aluminium alloys, texture, annealing, mechanical properties

Abstract

In this work the microstructure, texture and mechanical properties during different stages of reverse cold rolling (RCR) process on aluminium alloy AA1100-H14 were analysed.  Microstructure was observed using optical and electron scanning microscopy. Texture was analysed using X-ray diffraction (macrotexture) and electron back-scattering diffraction (microtexture) techniques. Tensile test and microhardness measurements were carried out. Results showed that a high deformation using RCR was obtained in samples of annealed state leading to maximum values of tensile strength and hardness, along with a reduction of ductility. Intensity of -fibres decreased producing unstable textures {112} <110> while microstructure exhibited refinement of grain, with enlarged morphology.

Downloads

Published

2021-06-10

Versions

How to Cite

[1]
O. Rivero, D. Pico, L. G. Castruita, F. García-Pastor, and J. Unfried, “Effects of reverse cold rolling on the microstructure, texture and mechanical properties of AA1100 aluminium alloys”, J. Mech. Eng. Sci., vol. 15, no. 2, pp. 7983–7992, Jun. 2021.

Issue

Section

Article