Vol. 14 No. 4 (2020): December 2020

Article

• Effect of semi-solid forming temperature and heat treatment on mechanical properties and microstructure of Mg-Al-Zn Alloy (AZ91D) for automotive light application

  M.R. M. Kamal, N.F. Bazilah, M.H. Idris, M.S. Salleh, W.F.F. W. Ali

  7319 - 7327

  • PDF

• Numerical analysis on the use of multi-element blades in a horizontal-axis hydrokinetic turbine

  Jonathan Aguilar, Laura Isabel Velásquez, Ainhoa Rubio Clemente, Edwin Chica

  7328 - 7347

  • pdf

• Effect of boundary factor and material property on single square honeycomb sandwich panel subjected to quasi-static compression loading

  Quanjin Ma, Tengfei Kuai, M.R.M Rejab, Nallapaneni Manoj Kumar, M.S Idris; M.H Abdullah

  7348 - 7360

  • PDF

• Creep behaviour monitoring of short-term duration for fiber-glass reinforced composite cross-arms with unsaturated polyester resin samples using conventional analysis

  A. N. Johari, M.R. Ishak, Z. Leman, M.Z.M. Yusoff, M.R.M. Asyraf

  7361 - 7368

  • PDF

• Effects of stator splitter blades on aerodynamic performance of a single-stage transonic axial compressor

  Ky-Quang Pham, Xuan-Truong Le, Cong-Truong Dinh

  7369 - 7378

  • PDF

• The effect of fibre treatment on water absorption and mechanical properties of buri palm (Corypha utan) fibre reinforced epoxy composites

  M. Zalinawati, J. P. Siregar, C. Tezara, J. Jaafar, N. Sazali, A.N Oumer, M.H.M Hamdan

  7379 - 7388

  • PDF

• Strength predictions of single-lap woven fabric Kenaf composites bolted joints

  H. Ahmad, K. Supar

  7389 - 7395

  • PDF

• Actuation and dynamic mechanical characteristics of a core free flat dielectric electro-active polymer soft actuator

  Abdul Malek Abdul Wahab, Emiliano Rustighi, Zainudin A.

  7396 - 7404

  • PDF

• Influence of hygrothermal conditioning on the properties of compressed kenaf fiber / epoxy reinforced aluminium laminates

  Edynoor Osman, Mohd Warikh Abd. Rashid, Mohd Edeerozey Abd Manaf, Toshihiro Moriga, Hazlinda Kamarudin

  7405 - 7415

  • PDF

• Effect of raster inclinations and part positions on mechanical properties, surface roughness and manufacturing price of printed parts produced by fused deposition method

  Mohammed Yunus, Mohammad S. Alsoufi

  7416 - 7423

  • PDF

• Investigation on the flexural properties of nanofillers loading on the Jute/Carbon/PLA nanocomposites

  Nur Aqilah Sairy, Norkhairunnisa Mazlan, Mohamad Ridzwan Ishak, Nik Noriman Zulkepli

  7424 - 7433

  • PDF

• Numerical analysis of reaction forces at the supports of sliding microwire

  Fazlar Rahman, M. A. Salam Akanda

  7434 - 7445

  • PDF

• Review on the aerodynamics of intermediate compressor duct

  Manish Sharma, Beena D. Baloni

  7446 - 7468

  • PDF

• Preliminary study on fault detection using artificial neural network for water-cooled reactors

  J. A. Karim, T. Lanyau, M. Maskin, M. A. S. Anuar, A. Che Soh, R. Z. A. Rahman

  7469 - 7480

  • PDF

• Recovering waste energy of the combined gas turbine system using paraffin melting

  Yousef Najjar, Abdelrahman Irbai

  7481 - 7497

  • PDF

• Using computational fluid dynamics to predict the erosion rates on the cyclones wall for coal boiler plant

  B. Anindito, T. Nurtono, S. Winardi

  7498 - 7506

  • PDF

• Effects of tool shoulder geometry on mechanical properties and microstructure of friction-stir welded joints of AA5083-0 aluminium alloys

  Francisco Ortega, William Fernandez, Juan Felipe Santa, Jimy Unfried-Silgado

  7507 - 7519

  • PDF

• Substantiation of the parameters of the process of plasma-mechanical milling of titanium alloys and alloyed steels

  Anton Ryazantsev, V.P. Nechaev, O.V. Bondar

  7520 - 7527

  • PDF

• Effect of impregnation on hybrid mesoporous silica / kenaf reinforced epoxy composites in term of flexural, compressive and water absorption properties

  F. Bajuri, N. Mazlan, M. R. Ishak, M. K. A. Uyup

  7528 - 7539

  • PDF

• Real time detection of milk’s spoilage using Au/GO bend SMF sensor based on localized surface plasmon resonance effect

  Wan Maisarah Mukhtar, Izzati Kamarolzaman

  7540 - 7550

  • PDF

• Performance and emission study of sesbania aculeate biodiesel in a VCR diesel engine

  Dandu Mallesham, J. Krishnaraj, CH. Ravikiran

  7551 - 7568

  • PDF

• Thermal behavior of natural convection flow in an inclined solar air heater

  Mohammed A. Neama, Ayad T. Mustafa

  7569 - 7588

  • PDF

• Plastic anisotropic and damage evolution analysis of recycled aluminium alloy AA6061 at high rate of strain

  C. S. Ho, M. K. Mohd Nor, M. A. Ab Rani, N. Ma'at, M. T. Hameed Sultan, M. A. Lajis

  7589 - 7599

  • PDF

• Comparison of the spine kinematics by defining lumbar as single and multi-segmental in completing critical daily task

  W. A. A Saad, Mohd Azuwan Mat Dzahir, Yamamoto Shinichirou, Mohamed Hussein, Maziah Mohamad, Shaharil Mad Saad, Mohd Azwarie Mat Dzahir, Aizreena Azaman

  7600 - 7608

  • PDF

• A perspective review: Technical study of combining phase contrast magnetic resonance imaging and computational fluid dynamics for blood flow on carotid bifurcation artery

  Mohd Azrul Hisham Mohd Adib, Lim Sheh Hong, Mohd Shafie Abdullah, Radhiana Hassan, Shigeo Wada

  7609 - 7621

  • PDF

• Influence of yarn parameters on cotton/kenaf blended yarn characteristics

  S. A. S. Abdullah, N. Z. M. Zuhudi, K. D. Mohd Aris, M. N. Roslan, M. D. Isa

  7622 - 7627

  • PDF