Vol. 15 No. 3 (2021): September 2021

Article

• Performance characteristics of diesel engine using blends of Jatropha biodiesel

  Tariq Mahmood, Zain Ali khan, Shahid Hassan, Ijaz A. Chaudhry

  8219 - 8227

  • PDF

• Aerodynamic study of three cars in tandem using computational fluid dynamics

  H. Abdul-Rahman, H. Moria, M.R. Rasani

  8228 - 8240

  • PDF

• Simulation of bypass electric water pump to reduce the engine warm-up time

  R.I. Abdul Jalal, M.A Mohd Yusoff, H.M Abid Hasan, M.N Yahya

  8241 - 8252

  • PDF

• Three-dimensional fluid-thermal-structure multiphysics interaction simulation model of aluminium extrusion process

  Maher A. R. Sadiq Al-Baghdadi, Muhannad Al-Waily

  8253 - 8261

  • PDF

• Thermodynamic investigation of intercooling location effect on supercritical CO2 recompression Brayton cycle

  Sompop Jarungthammachote

  8262 - 8276

  • PDF

• An experimental study of the effect of the projection ratio and throat-aspect ratio on the efficiency and loss coefficient of a water jet pump

  Muhammad Penta Helios, Wanchai Asvapoositkul

  8277 - 8288

  • PDF

• Predictive maintenance for rotating machinery by using vibration analysis

  N. Jamil, M.F. Hassan, S.K. Lim, A.R. Yusoff

  8289 - 8299

  • PDF

• Experiment analysis on the characteristic of empty fruit bunch, palm kernel shell, coconut shell, and rice husk for biomass boiler fuel

  Sivabalan Kaniapan, H. Suhaimi, Y. Hamdan, Jagadeesh Pasupuleti

  8300 - 8309

  • PDF

• Enhancement of laser heating process by laser surface modification on Titanium alloy

  A. Q. Zaifuddin, F. Zulhilmi, M.H. Aiman, M.M. Quazi, M. Ishak

  8310 - 8318

  • PDF

• Numerical studies for effect of geometrical parameters on water jet pump performance via entropy generation analysis

  Muhammad Penta Helios, Wanchai Asvapoositkul

  8319 - 8331

  • PDF

• Investigation of microstructural and mechanical properties of AA1050-AZ91D dissimilar friction stir welding

  Oyindamola Kayode, Esther Titilayo Akinlabi

  8332 - 8343

  • PDF

• Mathematical modelling of concrete compressive strength with waste tire rubber as fine aggregate

  B. W. Chong, R. Othman, P. J. Ramadhansyah, S. I. Doh, Xiaofeng Li

  8344 - 8355

  • PDF

• Parametric analysis on a simple design water reaction turbine for low-head low-flow Pico-hydro generation system

  N. A. M. Rais, M. F. Basar

  8356 - 8363

  • PDF

• Turbulent heat transfer enhancement in tubular heat exchangers with different twisted tape inserts

  S.H. Labib, M. R. A. Himel, J.I. Ali, A.R. Mim, M.J. Hossain, A.K. Ghosh, A. Goswami

  8364 - 8378

  • PDF

• Effects of roof configuration on natural ventilation for an isolated building

  Lip Kean Moey, Man Fai Kong, Vin Cent Tai, Tze Fong Go, Nor Mariah Adam

  8379 - 8389

  • PDF

• Experimental investigation on electro-discharge surface modification phenomenon of P20+Ni die steel using green P/M composite electrode

  J. L. Ramdatti, A. V. Gohil, K. G. Dave

  8390 - 8404

  • PDF

• Efficient algorithms and models for mechanical and structural design optimization

  Mohamed Abdou Mahran Kasem, Karam Maalawi

  8405 - 8417

  • PDF

• Effect of backward injection with combined hole on film colling performance

  Fatima Ben Ali Kouchih, K. Boualem, A. Azzi

  8418 - 8427

  • PDF

• Influence of biodiesel blends produced in Colombia on a Diesel engine

  Oscar Venegas, Luisa Mónico

  8428 - 8439

  • PDF

• Flow behavior in a contra-rotating transonic axial compressor

  S. Abbasi, M. Alizadeh

  8440 - 8449

  • PDF

• Investigation on the physical properties and diffusion layer phase transformation at the interface of Sialon-Duplex Stainless-Steel bonding

  Mohamed Ahmed Rady, Patthi Hussain, Nagoor Basha Shaik, Balaji Bakthavatchalam

  8450 - 8458

  • PDF

• The effect of modal properties of crash box structures with trigger mechanisms towards the crashworthiness by using finite element analysis

  M.N.A.M. Asri, N.A.Z. Abdullah, M.S.M. Sani

  8459 - 8468

  • PDF