Vol. 12 No. 4 (2018): (December 2018)

Article

• 

  Numerical predictions of sand erosion in a choke valve

  N. H. Saeid

  3988-4000

  • PDF

• Electron spins coupling of coconut shell activated nanocarbons in solid propellant on improving to the thrust stability and specific impulses

  Nur Rachman Supadmana Muda, I.N.G. Wardana, Nurkholis Hamidi, Lilis Yuliati, Gunawan Witjaksono

  4001-4017

  • PDF

• Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

  Sathyashankara Sharma, B. M Gurumurthy, U. Achutha Kini, Ananda Hegde, Ajinkya Patil

  4018-4029

  • PDF

• Regeneration of geothermal-sludge based sodium silicate catalyst for transesterification of palm oil with methanol

  I. Perdana, Lenny Lenny, I. M. Bendiyasa

  4030-4043

  • PDF

• Effect of inlet air temperature on SI engine fueled with diethyl ether-gasoline blends

  S. Srihari, D. Sanjay Kumar, Thirumalini S

  4044-4055

  • PDF

• A new nine-node element for analysing plates with varying thickness using basic displacement functions

  K. Tayyebi, A. M. Haghighi, R. Attarnejad

  4056-4071

  • PDF

• Design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process

  M. Rizal, J. A. Ghani, Husni ., Husaini .

  4072-4087

  • PDF

• Amine-based carbon dioxide absorption: evaluation of kinetic and mass transfer parameters

  S. Ma’mun, Hallvard F. Svendsen, I. M. Bendiyasa

  4088-4097

  • PDF

• An experimental study of solar thermal system with storage for domestic applications

  M. Abid, B. A. A. Yousef, M. E. Assad, A. Hepbasli, K. Saeed

  4098-4116

  • PDF

• An experimental investigation on the performance of a thermoelectric dehumidification system

  P. Rakkwamsuk, P. Paromupatham, K. Sathapornprasath, C. Lertsatitthanakorn, S. Soponronnarit

  4117-4126

  • PDF

• Experimental investigations of friction stir welded AA6063 aluminum matrix composite

  Narinder Kaushik, Sandeep Singhal, Rajesh Rajesh, Pardeep Gahlot, B. N Tripathi

  4127-4140

  • PDF

• The potential effectiveness of lean construction principles in reducing construction process waste: an input-output model

  M. S. Bajjou, A. Chafi

  4141-4160

  • PDF

• Real-time implementation of an enhanced nonlinear PID controller based on harmony search for one-stage servomechanism system

  Mohamed. A. Shamseldin, Mohamed Sallam, A. M. Bassiuny, A. M. Abdel Ghany

  4161-4179

  • PDF

• Machinability and related properties of austempered ductile iron: A review

  Ananda Hegde, Sathyashankara Sharma, Gowri Shankar M. C

  4180-4190

  • PDF

• Tensile and impact properties of pulverized oil palm fiber reinforced polypropylene composites : A comparison study with wood fiber reinforced polypropylene composites

  M. N. A. Nordin, K. Sakamoto, H. Azhari, K. Goda, M. Okamoto, H. Ito, T. Endo

  4191-4202

  • PDF

• Effect of end chills, reinforcement content and carburization on the hardness of LM25-borosilicate glass particulate composite

  A. Hiremath, A. Amar Murthy, S. V. Pranavathmaja, A. Jajodia, R. Sreenath

  4203-4215

  • PDF

• Numerical simulation of two-phase separation in T-junction with experimental validation

  Minh Tran, Zeeshan Memon, Ahmed Saieed, William Pao, Fakhruldin Hashim

  4216-4230

  • PDF

• Response prediction of reverse engineered free form surface by design of experiments

  G. Sreeram Reddy, V. V. Satyanarayana, M. Manzoor Hussian, J. Jagadesh Kumar

  4231-4242

  • PDF

• Fluid – structure interaction study for the DIFIS System’s composite riser tube

  S. D. Fanourgakis, D. E. Mazarakos, V. Kostopoulos

  4243-4262

  • PDF

• Economic potential assessment of rare earth extraction sequence based on rule-based framework

  M. Y. M. Yunus, N. A. Ismail, B. A. Aziz

  4263-4274

  • PDF

• Bond strength evaluation of heat treated Cu-Al wire bonding

  S. Shariza, T. Joseph Sahaya Anand, A. R. M. Warikh, Lee Cher Chia, Chua Kok Yau, Lim Boon Huat

  4275-4284

  • PDF

• Multi-pass friction stirred clad welding of dissimilar joined AA6061 aluminium alloy and brass

  Nora Osman, Zainuddin Sajuri, Mohd Zaidi Omar

  4285-4299

  • PDF

• Three dimensional cyclonic turbulent flow structures at various geometries, inlet-outlet orientations and operating conditions

  Pasymi Pasymi, Y. W. Budhi, A. Irawan, Y. Bindar

  4300-4328

  • PDF

• Characterization of cohesive model and bridging laws in mode I and II fracture in nano composite laminates

  P. Ghabezi, M. Farahani

  4329-4355

  • PDF