Basic and Morphological Properties of Bukit Goh Bauxite
DOI:
https://doi.org/10.15282/construction.v4i2.10736Keywords:
Bauxite, Morphological Properties, Basic Properties, SEM, IMSBC CodeAbstract
The research focuses on the basic and morphological characteristics to ensure bauxite ore reaches the International Maritime Solid Bulk Cargoes Code (IMSBC Code) standard before being exported to other countries. To analyze this characteristic of the bauxite, some laboratory tests referred to Geospec 3: Model Specification for Soil Testing had been done to identify the bauxite's basic properties: particle size distribution, moisture content and specific gravity and its morphological properties. Laboratory tests involved are hydrometer, small pycnometer, dry sieve, and scanning electron microscopy tests. About four samples were selected at Bukit Goh, Kuantan; two were from the Bukit Goh mine, and another two were from the stockpile. All studies on the characteristics of bauxite were analyzed and recorded to compare with the IMSBC Code. The analysis of the result shows that the average moisture content of the soil is 20.64%, which is above 10% from the recommended value; the value of bulk density is not in the range of 1190 kg/m3 to 1389 kg/m3, which is 2836.25 kg/m3 and the particle size distribution for fine material is greater than 30% and coarse material is less than 70%. From the SEM test, image analysis proved that there were many fine particles in bauxite samples. By the IMSBC Code, Bukit Goh bauxite cannot be categorized as group C. Hence, bauxite collected from Bukit Goh mines has yet to achieve the standard; thus, it is not suitable for export.
References
M.S.I. Zaini, and M. Hasan, “Effect of optimum utilization of silica fume and lime on the stabilization of problematic soils,” International Journal of Integrated Engineering, vol. 15, no. 1, pp. 352-366, 2023.
A. Al-Hokabi, M. Hasan, M. Amran, R. Fediuk, N. I. Vatin, and S. Klyuev, “Improving the early properties of treated soft kaolin clay with palm oil fuel ash and gypsum,” Sustainability (Switzerland), vol. 13, no. 19, p. 10910, 2021.
A. Wahab, M. Hasan, F. M. Kusin, Z. Embong, Q.U. Zaman, Z. U., Babar, and M. S. Imran, “Physical properties of undisturbed tropical peat soil at Pekan District, Pahang, West Malaysia,” International Journal of Integrated Engineering, vol. 14, no. 4, pp. 403-414, 2022.
A. Mouratidis, and P. Nikolidakis. “Engineering properties of bauxite residue,” International Journal of Sustainable Development and Planning, vol. 15, no. 3, pp. 319-325, 2020.
M.S.I. Zaini, M. Hasan, S. Almuaythir, and M. Hyodo, “Experimental investigations on physico-mechanical properties of kaolinite clay soil stabilized at optimum silica fume content using clamshell ash and lime, Scientific Reports, vol. 14, no. 1, p. 10995, 2024.
J. Jiang, J. Su, X. Ou, M. Weng, and X. Lü. “Study on the physical and mechanical properties of bauxite residue by laboratory and field in-situ tests,” Environmental Earth Sciences, vol. 80, no. 10, p. 377, 2021.
T. Newson, T. Dyer, C. Adam, and S. Sharp, “Effect of structure on the geotechnical properties of bauxite residue,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 132, no. 2, pp. 143-151, 2006.
M.S.I. Zaini, and M. Hasan, “Application of electrical resistivity tomography in landfill leachate detection assessment. In: Anouzla, A., Souabi, S. (eds), A review of Landfill Leachate: Characterization Leachate Environment Impacts and Sustainable Treatment Methods, pp. 1-22. Cham: Springer Nature Switzerland, 2024.
J. Ren, J. Chen, W. Guo, B. Yang, X. Qin, and P. Du. “Physical, chemical, and surface charge properties of bauxite residue derived from a combined process,” Journal of Central South University, vol. 26, no. 2, pp. 373-382, 2019.
S. Kumar S, and B.H. Rao. “Rheological properties of bauxite residue: the role of tailings gradation and solids concentration,” Innovative Infrastructure Solutions, vol. 7, no. 1, p. 96, 2022.
M. Hasan, M.S.I. Zaini, N.A.W. Hong, A. Wahab, K.A. Masri, R. Putra Jaya, et al., “Sustainable ground improvement method using encapsulated polypropylene (PP) column reinforcement,” In IOP Conference Series: Earth and Environmental Science, vol. 930, no. 1, p. 012016, 2021.
S. Mavahebi, M. Bavand-vandchali, and A. Nemati. “SiC fines effects on the microstructure and properties of bauxite-based low-cement refractory castables,” Ceramics International, vol. 45, no. 13, 2019.
N.S. Bonal, A. Prasad, and A.K. Verma. “Effect of microbial biopolymers on mechanical properties of bauxite residue,” KSCE Journal of Civil Engineering, vol. 25, no. 4, 2021.
M.S.I. Zaini, M.F. Ishak, and M.F. Zolkepli, “Monitoring soil slope of tropical residual soil by using tree water uptake method,” In IOP Conference Series: Materials Science and Engineering, Ivol. 736, no. 7, p. 072018, 2020.
M.F. Ishak, M.F. Zolkepli, M.Y.M. Yunus, N. Ali, A. Kassim, and M.S.I. Zaini, “The effect of tree water uptake on suction distribution in tropical residual soil slope,” Physics and Chemistry of the Earth, vol. 121, p. 102984, 2021.
M.S.I. Zaini and M. Hasan, “Effect of Alstonia Angustiloba tree moisture absorption on the stabilization of unsaturated residual soil slope,” International Journal of Environmental Science and Technology, pp. 1-20, 2024.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 The Author(s)
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.