The improvement of bolted joints model via finite element model updating method
DOI:
https://doi.org/10.15282/jmes.15.4.2021.16.0682Keywords:
Thin sheet metal, bolted joints, modal based updating, local effectsAbstract
Efficient schemes to represent mathematical model of thin-sheet metal structures jointed by bolted joints for accurately predict the structure dynamic behaviour has been a significant unresolved issue in structural dynamics community. The biggest challenge is to efficiently incorporate the joints local deformation effects on the developed mathematical model via finite element (FE) method. Generally, the joints local deformation typically exerts on the joints mating area. To solve this issue, this paper proposes efficient schemes to represent mathematical model of thin-sheet metal structures jointed by bolted joints with application to accurately calculate the structure dynamic behaviour using FE model updating method. The initial FE model of the assembled structure was developed by employed Fastener Connector (CFAST) in MSC NASTRAN software to represent the bolted joints while, the inclusion of the local deformation effects at the bolted joints mating area was represented by contact elements. Then, the responses obtained from the FE model was evaluated by weight up with experimental data. FE model updating (FEMU) method then was utilised for minimising prediction discrepancies originated from the initial FE model based on the experimental data. The proposed scheme shows the accuracy of the initial prediction was improved from 25.03 % to 14.65 % while the accuracy of the predicted mode shapes via modal assurance criterion (MAC) analysis were above 0.8. Therefore, the findings offer useful schemes for improving the quality of predicted dynamic behaviour, particularly in the thin-sheet metal jointed structure and the developed model can be used with confident for any subsequence dynamic analyses.
References
M. A. Yunus, H. Ouyang, M. N. Abdul Rani, and A. A. Misa, “Finite element modelling and updating of bolted joints in a thin sheet metal structure,” in 20th International Congress on Sound and Vibration, vol. 2, pp. 1146–1152, 2013.
B. Chang, Y. Shi, and S. Dong, “Studies on a computational model and the stress field characteristics of weld-bonded joints for a car body steel sheet,” J. Mater. Process. Technol., vol. 100, no. 1, pp. 171–178, 2000.
R. A. Ibrahim and C. L. Pettit, “Uncertainties and dynamic problems of bolted joints and other fasteners,” J. Sound Vib., vol. 279, no. 3–5, pp. 857–936, 2005.
T. Marwala, Finite-element-model updating using computional intelligence techniques: Applications to structural dynamics, 2010 ed. United Kindom, Springer, 2010.
J. E. Mottershead, M. I. Friswell, G. H. T. Ng, and J. a Brandon, “Geometric parameters for finite element model updating of joints and constraints,” Mech. Syst. Signal Process., vol. 10, no. 2, pp. 171–182, 1996.
J. W. R. Meggitt and A. T. Moorhouse, “Finite element model updating using in-situ experimental data,” J. Sound Vib., vol. 489, pp. 115, 2020.
M. A. Yunus, M. A. S. Aziz Shah, M. N. Abdul Rani, W. I. I. Wan Iskandar Mirza, and S. Kushairi, “Experimental and finite element analysis of laser stitch welded structure,” J. Mech. Eng., vol. 4, no. 3, pp. 155–162, 2017.
S. N. Zahari, A. A. R. Zakaria, M. Sani, and I. Bujang, “A review on model updating of joint structure for dynamic analysis purpose,” MATEC Web of Conferences, vol. 74, no. 23, pp. 1–6, 2016.
J. E. Mottershead, C. Mares, M. I. Friswell, and S. James, “Selection and updating of parameters for an aluminium space-frame model,” Mech. Syst. Signal Process., vol. 14, no. 6, pp. 923–944, 2000.
J. E. Mottershead and M. I. Friswell, “Model updating in structural dynamics: A survey,” Journal of Sound and Vibration, vol. 167, no. 2. pp. 347–375, 1993.
S. Donders, M. Brughmans, L. Hermans, and N. Tzannetakis, “The effect of spot weld failure on dynamic vehicle performance,” Sound Vib., vol. 39, no. April, pp. 16–25, 2005.
H. Jalali, H. H. Khodaparast, H. Madinei, and M. I. Friswell, “Stochastic modelling and updating of a joint contact interface,” Mech. Syst. Signal Process., vol. 129, pp. 645–658, 2019.
S. Kano, “Microstructure and mechanical property in heat affected zone (HAZ) in F82H jointed with SUS316L by fiber laser welding,” Nucl. Mater. Energy, vol. 9, pp. 300–305, 2016.
R. J. Allemang, “The modal assurance criterion - Twenty years of use and abuse,” J. Sound Vib., vol. 37, no. 8, pp. 14–21, 2003.
M. A. S. Aziz Shah, M. A. Yunus, M. N. Abdul Rani, N. A. Tormidi, A. A. Mat Isa, and W. I. I. Wan Iskandar Mirza, “Closed mode separation of the symmetrical structure,” J. Mech. Eng., vol. 5, no. 3, pp. 88–97, 2018.
D. D. Heiserer, M. Chargin, and D. J. Siela, “High performance , process oriented , weld spot approach,” 1st MSC Worldw. Automot. User Conf., pp. 1–14, 1999.
J. Kim, J. C. Yoon, and B. S. Kang, “Finite element analysis and modeling of structure with bolted joints,” Appl. Math. Model., vol. 31, no. 5, pp. 895–911, 2007.
Q. Rui, H. Ouyang, and H. Y. Wang, “An efficient statistically equivalent reduced method on stochastic model updating,” Appl. Math. Model., vol. 37, no. 8, pp. 6079–6096, 2013.
K. Brown, C. Morrow, S. Durbin, and A. Baca, “Guideline for bolted joint design and analysis: Version 1.0, United States: N. p., 2008.
W. Xiao, K. Mao, B. Li, and S. Lei, “Contact stiffness of bolted joint with different material combination in machine tools,” J. Vibroengineering, vol. 16, no. 7, pp. 3281–3293, 2014.
J. Söderberg, “A finite element method for calculating load distributions in bolted joint assemblies,” PhD Thesis, Linkoping University, 2012.
R. Omar, M. N. A. Rani, and M. A. Yunus, “Finite element modelling and updating of a bolted structure using elements representing the stiffness members, bolts and affected areas of the joints,” J. Phys. Conf. Ser., vol. 1262, no. 1, 2019.
M. Zhan, Q. Guo, L. Yue, and B. Zhang, “Modeling and stochastic model updating of bolt-jointed structure,” Shock Vib., vol. 2018, pp. 1–12, 2018.
F. Kuratani, M. Okuyama, T. Yamauchi, S. Washior, and S. Washio, “Finite element modeling of spot welds for vibration analysis,” 5th Asian Conf. Multibody Dyn., Japan, 2010.
S. Sehgal and H. Kumar, “Structural dynamic model updating techniques: A state of the art review,” Arch. Comput. Methods Eng., vol. 23, no. 3, pp. 515–533, 2016.
J. E. Mottershead, M. Link, and M. I. Friswell, “The sensitivity method in finite element model updating: A tutorial,” Mech. Syst. Signal Process., vol. 25, no. 7, pp. 2275–2296, 2011.
Y. Yuan and H. Liu, “An iterative method for solving finite element model updating problems,” Appl. Math. Model., vol. 35, no. 2, pp. 848–858, 2011.
M. Mahendran, “The modulus of elasticity of steel - Is it 200 GPa?,” Thirteen. Int. Spec. Conf. Cold-Formed Steel Struct. St. Louis, Missouri U.S.A., pp. 641–648, 1996.
X. Liao, J. Zhang, and X. Xu, “Analytical model of bolted joint structure and its nonlinear dynamic characteristics in transient excitation,” Shock Vib., vol. 2016, 2016.
MSC.Software Corp., MSC.Nastran 2005, vol. 1. 2005, pp. 1–1008.
M. A. S. A. Shah, M. A. Yunus, A. M. Saman, M. N. A. Rani, A. R. Bahari, and C. Peter, “Finite element model updating of laser stitch welded structure,” in IOP Conference Series: Materials Science and Engineering, vol. 506, 2019.
N. M. M. Maia and J. M. M. Silva, Theoretical and Experimental Modal Analysis, 1st editio. Research Studies Press, 1997.
M. Friswell and J. E. Mottershead, Finite Element Model Updating in Structural Dynamics. Netherlands: Springer, 1995.
M. Baruch, “Optimization procedure to correct stiffness and flexibility matrices using vibration tests,” AIAA J., vol. 16, no. 11, pp. 1208–1210, 1978.
D. Ewins, Modal Testing: Theory, practice, and application, 2nd ed. United Kindom: Research Studies Press, 2000.
W. Heylen, Modal analysis theory and testing, 1st ed. Belgium: Division of Production Engineering, Machine Design and Automation, Katholieke Universiteit Leuven, 1998.
M. Pastor, M. Binda, and T. Harčarik, “Modal assurance criterion,” Procedia Eng., vol. 48, pp. 543–548, 2012.
G. Steenackers and P. Guillaume, “Finite element model updating taking into account the uncertainty on the modal parameters estimates,” J. Sound Vib., vol. 296, no. 4–5, pp. 919–934, 2006.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Universiti Malaysia Pahang Publishing
This work is licensed under a Creative Commons Attribution 4.0 International License.
