Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process
Keywords:Aluminium metal matrix composite, functionally graded materials, powder metallurgy, pressureless sintering, two-step sintering, Silicon Nitride
The rapid advancement of the welding technology has simultaneously increased the demand for the online monitoring system in order to control the process. Among the methods that could be possibly used to assess the weld condition, an air-borne acoustic method grasps the attention from scholars due to its ability to provide a simple, non-contact, and low-cost measurement system. However, it is still lack of resources involving this subject in an attempt to deeply understand the emitted sound behaviour during welding especially when dealing with a complete deviation of a process parameter, welding types, workpiece material as well as the noise from the surrounding. This paper reviews the application of the acoustic method in monitoring the welding process. Specifically, this review emphasized the source of both structure-borne and air-borne acoustic during the welding process and the significance of applying the acoustic method in more detail. By focusing on the liquid state welding process, the scope of discussion converged on the arc and laser welding process. In the last part of this review, the potential future advancement of this method is pointed out before the overall conclusion is made.
How to Cite
Copyright (c) 2021 Universiti Malaysia Pahang Publishing
This work is licensed under a Creative Commons Attribution 4.0 International License.