Smart coating with pH-responsive micro-capsules containing corrosion inhibitors for anti-corrosion of AZ31 magnesium alloys

Nurul Shuhada Mohamed; J. Alias; N. A. Alang; A. F. Omar

doi:10.15282/jmes.19.2.2025.3.0831

Authors

Nurul Shuhada Mohamed Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, 26600 Pekan, Pahang, Malaysia
J. Alias Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, 26600 Pekan, Pahang, Malaysia
N. A. Alang Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, 26600 Pekan, Pahang, Malaysia
A. F. Omar School of Physics, Universiti Sains Malaysia,11800 USM, Pulau Pinang, Malaysia. Phone: +09-4315017, Fax.: +609 431 5555

DOI:

https://doi.org/10.15282/jmes.19.2.2025.3.0831

Keywords:

Smart coating, Benzotriazole, Linseed oil, Magnesium alloy

Abstract

The widespread use of AZ31 magnesium (Mg) alloys in automotive, aerospace, and biomedical applications is often hindered by their high susceptibility to corrosion. In this study, a novel pH-responsive smart coating was developed, integrating multilayer microcapsules containing benzotriazole (BTA) as a corrosion inhibitor and linseed oil (LO) as a self-healing agent to enhance the corrosion resistance of Mg alloys. The BTA in the shell provides immediate corrosion protection by forming a passive barrier layer under acidic or alkaline conditions. At the same time, the LO in the core offers sustained self-healing by sealing defects over time. Dual-functional poly(urea-formaldehyde) (PUF) microcapsules were synthesized via in-situ polymerization, incorporating BTA within a chitosan-alginate multilayer shell and LO in the core. The controlled release behaviour of BTA was analysed in acidic (pH 4) and alkaline (pH 10) conditions, revealing an enhanced release profile in acidic environments, which facilitates targeted corrosion inhibition. The structural and chemical properties of the microcapsules were characterized using FTIR, UV-Vis spectroscopy, SEM-EDX, and optical microscopy. The corrosion protection performance of the smart coating was evaluated on AZ31 Mg alloy substrates using electrochemical impedance spectroscopy. The results confirmed that the smart coating significantly improved the corrosion resistance of the AZ31 Mg alloy, with film resistance (R_film) values of 7.211 × 10⁴ Ω·cm² at pH 4 and 7.964 × 10⁴ Ω·cm² at pH 10. These values are higher than those of the epoxy-coated and uncoated AZ31 Mg alloy, indicating the formation of strong passive layers that impede electrolyte penetration. The increased R_film shows the effectiveness of coating in enhancing corrosion inhibition and self-healing capabilities under both acidic and alkaline conditions. Overall, this study demonstrates that utilizing biodegradable, pH-responsive multilayer microcapsules is a promising and environmentally friendly approach to protecting magnesium alloys from corrosion. These results suggest that this smart coating could be a practical and environmentally friendly solution for protecting lightweight metals, particularly in vehicles and similar applications.

References

[1] S. Chen, Z. Huang, M. Yuan, G. Huang, H. Guo, G. Meng, et al., “Trigger and response mechanisms for controlled release of corrosion inhibitors from micro/nanocontainers interpreted using endogenous and exogenous stimuli: A review,” Journal of Materials Science & Technology, vol. 125, pp. 67–80, 2022.

[2] M. Ali, M. Elsherif, A. Salih, A. Ul-Hamid, M. Hussein, S. Park, et al., “Surface modification and cytotoxicity of Mg-based bio-alloys: An overview of recent advances,” Journal of Alloys and Compounds, vol. 825, pp. 1-17, 2020.

[3] T. Ramakrishnan, K. R. Karthikeyan, V. Tamilselvan, S. Sivakumar, D. Gangodkar, H. Radha, et al., “Study of various epoxy-based surface coating techniques for anticorrosion properties,” Advances in Materials Science and Engineering, vol. 2022, pp. 1-8, 2022.

[4] J. Tan, L. Liu, H. Wang, J. Luo, “Advances in anti-corrosion coatings on magnesium alloys and their preparation methods,” Journal of Coatings Technology and Research, vol. 21, pp. 811–825, 2024.

[5] X. Xing, D. Zhou, E. Tang, S. Liu, X. Chu, X. Xu, et al., “A novel method to control the release rate of halloysite encapsulated Na2MoO4 with Ca2+ and corrosion resistance for Q235 steel,” Applied Clay Science, vol. 188, pp. 1-10, 2020.

[6] M. Rahmati, K. Raeissi, M. Toroghinejad, A. Hakimizad, and M. Santamaria, “Effect of pulse current mode on microstructure, composition and corrosion performance of the coatings produced by plasma electrolytic oxidation on AZ31 Mg alloy,” Coatings, vol. 9, pp. 1-19, 2019.

[7] D. Zhang, F. Peng, X. Liu, “Protection of magnesium alloys: From physical barrier coating to smart self-healing coating,” Journal of Alloys and Compounds, vol. 853, pp. 1-22, 2021.

[8] X. Han, J. Hu, Y. Wang, T. Xiao, W. Xia, Y. Chen, et al., “Facile fabrication and properties of super-hydrophobic MgAl-LDH films with excellent corrosion resistance on AZ31 magnesium alloy,” Frontiers in Materials, vol. 8, pp. 1–12, 2021.

[9] D. Yan, Y. Wang, J. Liu, D. Song, T. Zhang, J. Liu, et al., “Self-healing system adapted to different pH environments for active corrosion protection of magnesium alloy,” Journal of Alloys and Compounds, vol. 824, pp. 1-12, 2020.

[10] J. Han, S. Tang, H. San, X. Sun, J. Hu, Y. Yu, “Formation mechanism of calcium phosphate coating on a plasma electrolytic oxidized magnesium and its corrosion behavior in simulated body fluids,” Journal of Alloys and Compounds, vol. 818, pp. 1-14, 2020.

[11] Z. Jia, P. Xiong, Y. Shi, W. Zhou, Y. Cheng, Y. Zheng, et al., “Inhibitor encapsulated{,} self-healable and cytocompatible chitosan multilayer coating on biodegradable Mg alloy: a pH-responsive design,” Journal of Materials Chemistry, vol. 4, pp. 2498–2511, 2016.

[12] J. Song, X. Cui, G. Jin, Z. Cai, E. Liu, X. Li, et al., “Self-healing conversion coating with gelatin–chitosan microcapsules containing inhibitor on AZ91D alloy,” Surface Engineering, vol. 34, pp. 79–84, 2018.

[13] Z. Xie, S. Shan, “Nanocontainers-enhanced self-healing Ni coating for corrosion protection of Mg alloy,” Journal of Materials Science, vol. 53, pp. 3744–3755, 2018.

[14] C. Ding, Y. Tai, D. Wang, L. Tan, J. Fu, “Superhydrophobic composite coating with active corrosion resistance for AZ31B magnesium alloy protection,” Chemical Engineering Journal, vol. 357, pp. 518–532, 2019.

[15] Z. Zhang, L. Wang, M. Zeng, R. Zeng, M. Kannan, C. Lin, et al., “Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective,” Bioactive Materials, vol. 5, pp. 398–409, 2020.

[16] S. Liu, Z. Li, Q. Yu, Y. Qi, Z. Peng, J. Liang, “Dual self-healing composite coating on magnesium alloys for corrosion protection,” Chemical Engineering Journal, vol. 424, pp. 1-12, 2021.

[17] G. Chen, B. Jin, Y. Li, Y. He, J. Luo, “A smart healable anticorrosion coating with enhanced loading of benzotriazole enabled by ultra-highly exfoliated graphene and mussel-inspired chemistry,” Carbon, vol. 187, pp. 439–450, 2022.

[18] S. Farshid, M. Kharaziha, M. Atapour, “A self-healing and bioactive coating based on duplex plasma electrolytic oxidation/polydopamine on AZ91 alloy for bone implants,” Journal of Magnesium and Alloys, vol. 11, pp. 592–606, 2023.

[19] F. Santos, L. Binder, N. Scharnagl, T. da Conceição, “Sustainable smart coatings of chitosan and LDH loaded with natural inhibitors for corrosion protection of Mg AZ31 alloy,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 688, pp. 1-10, 2024.

[20] C. Zhou, Z. Li, J. Li, T. Yuan, B. Chen, X. Ma, et al., “Epoxy composite coating with excellent anticorrosion and self-healing performances based on multifunctional zeolitic imidazolate framework derived nanocontainers,” Chemical Engineering Journal, vol. 385, pp. 1-17, 2020.

[21] H. Cai, P. Wang, D. Zhang, “Smart anticorrosion coating based on stimuli-responsive micro/nanocontainer: a review,” Journal of Oceanology and Limnology, vol. 38, pp. 1045–1063, 2020.

[22] X. Huang, M. Sun, X. Shi, J. Shao, M. Jin, W. Liu, et al., “Chemical vapor deposition of transparent superhydrophobic anti-Icing coatings with tailored polymer nanoarray architecture,” Chemical Engineering Journal, vol. 454, pp. 1-9, 2023.

[23] X. R. Nóvoa, C. Pérez, “The use of smart coatings for metal corrosion control,” Current Opinion in Electrochemistry, vol. 40, pp. 1-8, 2023.

[24] S. Kumar, H. Singh, N. Gaur, S. Patil, D. Kumar, N. Singh, “Imparting increased corrosion passive and bio-active character to Al2O3 based ceramic coating on AZ91 alloy,” Surface and Coatings Technology, vol. 383, pp. 1-8, 2020.

[25] V. S. Saji, “Organic conversion coatings for magnesium and its alloys,” Journal of Industrial and Engineering Chemistry, vol. 75, pp. 20–37, 2019.

[26] T. Matsuda, K. B. Kashi, K. Fushimi, V. J. Gelling, “Corrosion protection of epoxy coating with pH sensitive microcapsules encapsulating cerium nitrate,” Corrosion Science, vol. 148, pp. 188–197, 2018.

[27] C. Kim, A. I. Karayan, J. Milla, M. Hassan, H. Castaneda, “Smart coating embedded with pH-responsive nanocapsules containing a corrosion inhibiting agent,” ACS Applied Materials and Interfaces, vol. 12, pp. 6451–6459, 2020.

[28] A. B. M. da Cunha, D. A. Leal, L. R. L. Santos, I. C. Riegel-Vidotti, C. E. B. Marino, “pH-sensitive microcapsules based on biopolymers for active corrosion protection of carbon steel at different pH,” Surface and Coatings Technology, vol. 402, pp. 1-10, 2020.

[29] X. Song, Y. Chen, H. Sun, X. Liu, X. Leng, “Physicochemical stability and functional properties of selenium nanoparticles stabilized by chitosan, carrageenan, and gum Arabic,” Carbohydrate Polymers, vol. 255, pp. 1-10, 2021.

[30] D. A. Leal, I. C. Riegel-Vidotti, M. G. S. Ferreira, C. E. B. Marino, “Smart coating based on double stimuli-responsive microcapsules containing linseed oil and benzotriazole for active corrosion protection,” Corrosion Science, vol. 130, pp. 56–63, 2018.

[31] Y. J. Yang, S. M. Yaakob, N. E. Rabat, M. R. Shamsuddin, Z. Man, “Release kinetics study and anti-corrosion behaviour of a pH-responsive ionic liquid-loaded halloysite nanotube-doped epoxy coating,” RSC Advances, vol. 10, pp. 13174–13184, 2020.

[32] S. Chen, S. Zhao, M. Chen, X. Zhang, J. Zhang, X. Li, et al., “The anticorrosion mechanism of phenolic conversion coating applied on magnesium implants,” Applied Surface Science, vol. 463, pp. 953–967, 2019.

[33] W. Wu, F. Zhang, Y. Li, L. Song, D. Jiang, R. C. Zeng, et al., “Corrosion resistance of dodecanethiol-modified magnesium hydroxide coating on AZ31 magnesium alloy,” Applied Physics A: Materials Science and Processing, vol. 126, pp. 1–11, 2020.

[34] X. Hao, S. Chen, D. Qin, M. Zhang, W. Lia, J. Fan, et al., “Antifouling and antibacterial behaviors of capsaicin-based pH responsive smart coatings in marine environments,” Materials Science and Engineering C, vol. 108, pp. 1-12, 2020.

[35] A. Ibrahim, I. A. Khalil, M. Y. Mahmoud, A. F. Bakr, M. G. Ghoniem, E. S. Al-Farraj, et al., “Layer-by-layer development of chitosan/alginate-based platelet-mimicking nanocapsules for augmenting doxorubicin cytotoxicity against breast cancer,” International Journal of Biological Macromolecules, vol. 225, pp. 503–517, 2023.

[36] N. Zheng, L. Qia, J. Liu, J. Lu, W. Li, C. Li, et al., “Microcapsules of multilayered shell structure synthesized via one-part strategy and their application in self-healing coatings,” Composites Communications, vol. 12, pp. 26–32, 2019.

[37] K. Cao, Z. Yu, D. Yin, L. Chen, Y. Jiang, L. Zhu, “Fabrication of BTA-MOF-TEOS-GO nanocomposite to endow coating systems with active inhibition and durable anticorrosion performances,” Progress in Organic Coatings, vol. 143, pp. 1-14, 2020.

[38] S. Lang, Q. Zhou, “Synthesis and characterization of poly(urea-formaldehyde) microcapsules containing linseed oil for self-healing coating development,” Progress in Organic Coatings, vol. 105, pp. 99–110, 2017.

[39] M. C. Rivera, A. C. Pinheiro, A. I. Bourbon, M. A. Cerqueira, A. A. Vicente, “Hollow chitosan/alginate nanocapsules for bioactive compound delivery,” International Journal of Biological Macromolecules, vol. 79, pp. 95–102, 2015.

[40] M. M. De Villiers, D. P. Otto, S. J. Strydom, Y. M. Lvov, “Introduction to nanocoatings produced by layer-by-layer (LbL) self-assembly,” Advanced Drug Delivery Reviews, vol. 63, pp. 701–715, 2011.

[41] L. S. Barreto, M. S. Tokumoto, I. C. Guedes, H. G. de Melo, F. Amado, V. R. Capelossi, “Study and assessment of the efficiency of the cocoa bark extracted from the theobroma cacao as an inhibitor of the corrosion of carbon steel in substitution of benzotriazole,” Materials Research, vol. 21, pp. 1-9, 2018.

[42] M. He, Y. Zheng, J. Shen, J. Shi, Y. Zhang, Y. Xiao, et al., “Chitosan/sodium alginate multilayer pH-sensitive films based on layer-by-layer self-assembly for intelligent packaging,” Journal of Renewable Materials, vol. 12, pp. 215–233, 2024.

[43] I. Kozina, H. Krawiec, M. Starowicz, M. Kawalec, “Corrosion resistance of MgZn alloy covered by chitosan-based coatings,” International Journal of Molecular Sciences, vol. 22, pp. 1-16, 2021.

[44] A. Khan, A. Hassanein, S. Habib, M. Nawaz, R. A. Shakoor, R. Kahraman, “Hybrid halloysite nanotubes as smart carriers for corrosion protection,” ACS Applied Materials and Interfaces, vol. 12, pp. 37571–37584, 2020.

[45] X. Ni, Y. Gao, X. Zhang, Y. Lei, G. Sun, B. You, “An eco-friendly smart self-healing coating with NIR and pH dual-responsive superhydrophobic properties based on biomimetic stimuli-responsive mesoporous polydopamine microspheres,” Chemical Engineering Journal, vol. 406, pp. 1-14. 2021.

[46] J. Miras, C. Liu, E. Blomberg, E. Thormann, S. Vílchez, J. Esquena, “pH-responsive chitosan nanofilms crosslinked with genipin,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 616, pp. 1- 10, 2021.

[47] C. Radhakumary, K. Sreenivasan, “Synthesis and evaluation of pH responsive silica-polymer hybrid nano capsules,” Soft Materials, vol. 9, pp. 347–358, 2011.

[48] L. Chen, Z. Yu, D. Yin, K. Cao, “Preparation and anticorrosion properties of BTA@HNTs-GO nanocomposite smart coatings,” Composite Interfaces, vol. 28, pp. 1–16, 2021.

[49] A. R. Hoseinzadeh, S. Javadpour, “Formulation of a smart nanocomposite coating with pH-responsive loaded halloysite and investigation of its anticorrosion behaviour,” Bulletin of Materials Science, vol. 43, pp. 1-10, 2020.

[50] R. Mahmoudi, P. Kardar, A. M. Arabi, R. Amini, P. Pasbakhsh, “The active corrosion performance of silane coating treated by praseodymium encapsulated with halloysite nanotubes,” Progress in Organic Coatings, vol. 138, pp. 1-13, 2020.

[51] N. Ghavidel, S. R. Allahkaram, R. Naderi, M. Barzegar, H. Bakhshandeh, “Corrosion and wear behavior of an electroless Ni-P/nano-SiC coating on AZ31 Mg alloy obtained through environmentally-friendly conversion coating,” Surface and Coatings Technology, vol. 382, pp. 1-17, 2020.

[52] M. Ghorbani, H. Ebrahimnezhad-Khaljiri, R. Eslami-Farsani, H. Vafaeenezhad, “The synergic effect of microcapsules and titanium nanoparticles on the self-healing and self-lubricating epoxy coatings: A dual smart application,” Surfaces and Interfaces, vol. 23, pp. 1-10, 2021.

[53] L. Zhu, C. Peng, K. Kuroda, and M. Okido, “Hydrophilic thin films formation on {AZ}31 alloys by hydrothermal treatment in silicate containing solution and the evaluation of corrosion protection in phosphate buffered saline,” vol. 6, pp. 1-12, 2019.

[54] J. Petkovska, N. Geskovski, D. Markovi´c, V. Dimova, D. Mirakovski, M. Radeti´c, et al., “Chitosan-pectin multilayer coating with anthocyanin grape dye as pH indicating wound dressing: Synthesis and characterization,” Carbohydrate Polymer Technologies and Applications, vol. 7, pp. 1-11, 2024.

[55] A. Khan, A. Hassanein, S. Habib, M. Nawaz, R. A. Shakoor, R. Kahraman, “Hybrid halloysite nanotubes as smart carriers for corrosion protection,” ACS Applied Materials and Interfaces, vol. 12, pp. 37571–37584, 2020.

[56] H. Ahmadi, V. Haddadi-Asl, H. E. Mohammadloo, “Advancing anticorrosion and antibacterial performance of mg AZ31 implants using novel pH-responsive polymeric surfactant for preparing PLGA nanoparticles,” Surface and Coatings Technology, vol. 482, pp. 1-15, 2024.

[57] J. Wang, J. Tang, H. Zhang, Y. Wang, H. Wang, B. Lin, et al., “A CO2-responsive anti-corrosion ethyl cellulose coating based on the pH-response mechanism,” Corrosion Science, vol. 180, pp. 1-15, 2021.

[58] S. Chen, X. Li, Z. Yang, S. Zhou, R. Luo, M. F. Maitz, et al., “A simple one-step modification of various materials for introducing effective multi-functional groups,” Colloids and Surfaces B: Biointerfaces, vol. 113, pp. 125–133, 2014.

[59] S. Chen, J. Zhang, Y. Chen, S. Zhao, M. Chen, X. Li, et al., “Application of phenol/amine copolymerized film modified magnesium alloys: Anticorrosion and surface biofunctionalization,” ACS Applied Materials and Interfaces, vol. 7, pp. 24510–24522, 2015.

[60] L. Cheng, C. Liu, H. Wu, H. Zhao, F. Mao, L. Wang, “A mussel-inspired delivery system for enhancing self-healing property of epoxy coatings,” Journal of Materials Science and Technology, vol. 80, pp. 36–49, 2021.

[61] Y. Ye, H. Chen, Y. Zou, H. Zhao, “Study on self-healing and corrosion resistance behaviors of functionalized carbon dot-intercalated graphene-based waterborne epoxy coating,” Journal of Materials Science and Technology, vol. 67, pp. 226–236, 2021.

[62] C. Wang, H. Fang, X. Qi, C. Hang, Y. Sun, Z. Peng, et al., “Silk fibroin film-coated MgZnCa alloy with enhanced in vitro and in vivo performance prepared using surface activation,” Acta Biomaterialia, vol. 91, pp. 99–111, 2019.

[63] C. Zhou, H. Zhang, X. Pan, J. Li, B. Chen, W. Gong, et al., “Smart waterborne composite coating with passive/active protective performances using nanocontainers based on metal organic frameworks derived layered double hydroxides,” Journal of Colloid and Interface Science, vol. 619, pp. 132–147, 2022.

[64] Q. Luan, H. Zhang, J. Wang, Y. Li, M. Gan, Q. Deng, et al., “Electrostatically reinforced and sealed nanocellulose-based macrosphere by alginate/chitosan multi-layer coatings for delivery of probiotics,” Food Hydrocolloids, vol. 142, pp. 1-9, 2023.

[65] M. Azadi, S. Dezianian, M. Azadi, A. H. Beyzavi, V. Talebsafa, “Effects of various adhesive layers on electrochemical characteristics of 3D-printed polylactic acid coatings on AM60 magnesium alloy,” High Temperature Corrosion of Materials, vol. 101, pp. 433-454, 2023.

[66] S. Y. Jian, C. Y. Yang, J. K. Chang, “Robust corrosion resistance and self-healing characteristics of a novel Ce / Mn conversion coatings on EV31 magnesium alloys,” Applied Surface Science, vol. 510, pp. 1-15, 2020.

[67] C. Sun, C. Liu, Y. Wang, D. Jiao, A. M. Zhang, P. S. Sui, et al., “Corrosion sensing and self-healing composite coatings on magnesium alloy AZ31 enabled by stimuli-responsive microcapsules loaded with phenolphthalein and epoxy resin,” Progress in Organic Coatings, vol. 186, pp. 1-13, 2024.

[68] C. Li, X. Guo, G. S. Frankel, “Smart coating with dual-pH sensitive, inhibitor-loaded nanofibers for corrosion protection,” npj Materials Degradation, vol. 5, pp. 1-13, 2021.

[69] P. Xie, Y. He, F. Zhong, C. Zhang, C. Chen, H. Li, et al., “Cu-BTA complexes coated layered double hydroxide for controlled release of corrosion inhibitors in dual self-healing waterborne epoxy coatings,” Progress in Organic Coatings, vol. 153, pp. 1-14, 2021.