Multi-characteristic optimization of WEDM for Ti-6Al-4V by applying grey relational investigation during profile machining

S. A. Sonawane; B. P. Ronge; P. M. Pawar

doi:10.15282/jmes.13.4.2019.22.0478

Authors

S. A. Sonawane SVERI’s College of Engineering, Pandharpur-413304, Maharashtra, INDIA Phone: +919850959863
B. P. Ronge SVERI’s College of Engineering, Pandharpur-413304, Maharashtra, INDIA Phone: +919850959863
P. M. Pawar SVERI’s College of Engineering, Pandharpur-413304, Maharashtra, INDIA Phone: +919850959863

DOI:

https://doi.org/10.15282/jmes.13.4.2019.22.0478

Keywords:

WEDM, Ti-6Al-4V, Taguchi method, Grey relational investigation, Grey relational score, Profile machining, SEM analysis

Abstract

This research work presents multi-quality features optimization while wire electrical discharge machining (WEDM) of Ti-6Al-4V. Taguchi’s L₂₇orthogonal arrangement is applied to inspect the outcome of governing variables such as pulse-on period, pulse-off interval, discharge voltage, discharge current, wire feed speed and cable tension on the kerf width, material removal rate (MRR), the surface roughness (SR) and overcut during intricate profile manufacturing on Ti-6Al-4V. To optimize all six governing variables, the grey relational investigation (GRI) is applied. The grey relational score is used as a multi-quality unique index (MQUI). From the experimental results the optimal configuration of governing variables obtained is pulse-on period 110 µs, pulse-off interval 55 µs, discharge voltage 40 volts, discharge current 170 Amp., wire feed speed 3 m/min and cable tension 8 gram. ANOVA analysis indicates that pulse-on period is an essential variable concerning the quality outputs. Results of confirmation trials show that the optimal governing variables improved the grey relational score (GRS) from 0.9048 to 0.9226 for the multiple responses. SEM analysis of machined parts shows that at high values of pulse on period and discharge current, deep craters, globules of debris, voids, and micro cracks are formed on the cut surface thus deteriorating the surface finish.

References

Ho KH, Newman ST, Rahimifard S, Allen RD. State of the art in Wire electrical discharge machining (WEDM). International Journal of Machine Tools Manufacture. 2004; 44: 1247-1259.

Jose J, Shunmugum MS. Investigation into white layer formed on wire electrical discharged machined TI6Al4V surface. International Journal of Machining and Machinability of Materials. 2009; 6: 234-249.

Pasam VK, Battula SB, MadarValli P, Swapna M. Optimizing Surface Finish in WEDM Using the Taguchi Parameter Design Method. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010; 49: 155-166.

Jabbaripour B, Sadeghi MH, Faridvand S, Shabgard MR. Investigating the effects of EDM parameters on surface integrity, MRR, and TWR in machining of Ti–6Al–4V. Machining Science and Technology: An International Journal. 2012; 16: 419-444.

Kumar A, Kumar V, Kumar J. Multi-response optimization of process parameters based on response surface methodology for pure titanium using WEDM process. International Journal of Advanced Manufacturing Technology. 2013; 68: 2645-2668.

Chalisgaonkar R, Kumar J. Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept. Frontiers of Mechanical Engineering. 2013; 8: 201-214.

Garg MP, Jain A, Bhushan G. Multi-objective optimization of process parameters in wire electrical discharge machining of Ti-6-2-4-2 alloy. Arabian Journal of Science and Engineering. 2014; 39: 1465-1476.

Ghodsiyeh D, Golshan A, Izman S. Multi-objective process optimization of wire electrical discharge machining based on response surface methodology. International Journal of Advanced Manufacturing Technology. 2014; 36: 301-313.

Sivaprakasam P, Hariharan P. Gowri, S. Modeling, and analysis of the micro-WEDM process of titanium alloy (Ti-6Al-4V) using response surface approach. Engineering Science and Technology an International Journal. 2014; 17: 227-235.

Ramamurthy A, Sivaramakrishnan R, Muthumaramalingam T, Venugopal S. Taguchi-grey computation methodology for optimum multiple performance measures on machining titanium alloy in WEDM process. Indian Journal of Engineering and Materials Sciences. 2015; 22: 181-186.

Kuriachen B, Somashekhar KP, Mathew J. Multiresponse optimization of wire electrical discharge machining process. International Journal of Advanced Manufacturing Technology. 2015; 76: 91-104.

Majumdar H, Maity K. Optimization of Machining condition in WEDM for titanium grade 6 using MOORA coupled with PCA-A multivariate hybrid approach. Journal of Advanced Manufacturing Systems. 2017; 16: 81-99.

Raj S, Prabhu, S. Modeling and analysis of Titanium alloy in wire-cut EDM using grey relational coupled with principal component analysis. Australian Journal of Mechanical Engineering. 2017; 15: 198-209.

Pujara JM, Kothari KD, Gohil AV. An investigation of material removal rate and kerf on WEDM through grey relational analysis. Journal of Mechanical Engineering and Sciences. 2018; 12: 3633-3644.

Devarajaiah D, Muthumari C. Evaluation of power consumption and MRR in WEDM of Ti–6Al–4V alloy and its simultaneous optimization for sustainable production. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018; 40: 1-18.

Ali MY, Banu A, Salehan M, Adesta EYT, Hazza M, Shaffiq M. Dimensional accuracy in Dry Micro wire Electrical Discharge Machining. Journal of Mechanical Engineering and Sciences. 2018; 12: 3321-3329.

Manjaiah M, Narendranath S, Basavrajappa S. A Review on machining of titanium Based alloys using EDM and WEDM. Reviews on Advanced Materials Science. 2014; 36: 89-111.

Ezugwu EO, Wang ZM. Titanium alloys and their machinability-a review. Journal of Materials Processing Technology. 1997; 68: 262-274.

Guitrau B. The EDM Handbook. Hansen Gardner Publications, Cincinnati, OH, 1997; 174.

Sharma N, Khanna R, Gupta RD. WEDM process variables investigation for HSLA by response surface methodology and genetic algorithm. Engineering Science and Technology an International Journal. 2015; 18: 171–177.

Tosun N, Cogun C, Tosun G. A study on kerf and material removal rate in wire electrical discharge machining based on Taguchi method. Journal of Materials Processing Technology. 2004; 152: 316-322.

Sharma P, Chakradhar D, Narendranath S. Evaluation of WEDM performance characteristics of Inconel 706 for turbine disk application. Materials and Design. 2015; 88: 558-566.

Sonawane S, Kulkarni M. Multi-quality characteristics optimization of WEDM for IN-625 by applying Taguchi DEAR technique. In: 1st International Conference on Communication and Signal Processing, Lonere, pp. 1-6; 2017.

Deng JL. Introduction to grey system theory. Journal of Grey System. 1989; 1: 1-24.

Chang CL, Tsai CH, Chen L. Applying grey relational analysis to the decathlon evaluation model. International Journal of the Computer, the Internet and Management. 2003; 11: 54-62.

Gostimirovic M, Kovac P, Sekulic M, Skoric B. Influence of discharge energy on machining characteristics in EDM. Journal of Mechanical Science and Technology. 2012; 26: 173-179.

Srivastava V, Pandey MP. Effect of process parameters on the performance of the EDM process with ultrasonic assisted cryogenically cooled electrode. Journal of Manufacturing Process. 2012; 14: 393-402.

Lee HT, Tai TY. Relationship between EDM parameters and surface crack formation. Journal of Materials Processing Technology. 2003; 142: 676-683.

Hscalik A, Caydas U. Electric discharge machining of titanium alloy (Ti-6Al-4V). Applied Surface Science. 2007a; 253: 9007-9016.