PURE POLYURETHANE AND CASTOR OIL BASED POLYURETHANE: SYNTHESIS AND CHARACTERIZATION
DOI:
https://doi.org/10.15282/jmes.8.2015.25.014Keywords:
Castor oil, in-situ polymerization, polyurethanes, vegetable oil, synthesis, poly propylene glycol.Abstract
In this study, the physico-chemical properties of high performance polyurethane synthesized from poly propylene glycol (PPG) in comparison with a combination of PPG and castor oil, is studied using the in-situ polymerization technique. The variations in properties of both types of polyurethanes are evaluated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and the thermogravimetric analysis (TGA) technique. Tensile strength properties were investigated by film tensile testing equipment. The results indicated the presence of large -CH stretching in the castor oil mixed polyurethane with a larger oxidative thermal stability over pure PPG polyurethanes. The tensile properties were found to be almost comparable in pure and mixed polymers, signifying the usage of mixed polymers in the future to overcome the environmental and economic crisis in polyurethane synthesis.
References
Lu QW, Macosko CW. Comparing the compatibility of various functionalized polypropylenes with thermoplastic polyurethane (TPU). Polymer. 2004;45:1981-91.
Cao X, Lee LJ, Widya T, Macosko C. Polyurethane/clay nanocomposites foams: processing, structure and properties. Polymer. 2005;46:775-83.
Edhi P, Adityo WH, Eva ON. Effects of chain extender to the structure of castor oil-based polyurethane foam. International Conference on Chemical and Material Engineering Grand Candi Hotel, Semarang Indonesia; 2012.
Meier MA, Metzger JO, Schubert US. Plant oil renewable resources as green alternatives in polymer science. Chemical Society Reviews. 2007;36:1788-802.
Gaidukov S, Cabulis U, Gromilova K, Tupureina V, Grigalovica A. Preparation and structural properties of free films from rapeseed oil-based rigid polyurethane-montmorillonite nanocomposites. International Journal of Polymer Science. 2013; 834595: 1-8.
Pradhan KC, Nayak P. Synthesis and characterization of polyurethane nanocomposite from castor oil-hexamethylene diisocyanate (HMDI). Adv Appl Sci Res. 2012;3:3045-52.
Yang LT, Zhao CS, Dai CL, Fu LY, Lin SQ. Thermal and mechanical properties of polyurethane rigid foam based on epoxidized soybean oil. J Polym Environ. 2012;20:230-6.
Shan CW, Ghazali MI, Idris MI. Improved vibration characteristics of flexible polyurethane foam via composite formation. International Journal of Automotive and Mechanical Engineering. 2013;7:1031-42.
Rojek P, Prociak A. Effect of different rapeseed‐oil‐based polyols on mechanical properties of flexible polyurethane foams. J Appl Polym Sci. 2012;125:2936-45.
Saravari O, Praditvatanakit S. Preparation and properties of urethane alkyd based on a castor oil/jatropha oil mixture. Progress in Organic Coatings. 2013;76:698-704.
Vashist D, Ahmad M. Statistical Analysis of Diesel Engine Performance for Castor and Jatropha Biodiesel-Blended Fuel. International Journal of Automotive and Mechanical Engineering. 2014;10:2155-69.
dos Santos D, Tavares L, Batalha G. Mechanical and physical properties investigation of polyurethane material obtained from renewable natural source. Journal of Achievements in Materials and Manufacturing Engineering. 2012;54(2): 211-6.
Kaushik A, Ahuja D, Salwani V. Synthesis and characterization of organically modified clay/castor oil based chain extended polyurethane nanocomposites. Composites Part A: Applied Science and Manufacturing. 2011;42:1534-41.
Desantes J, Galindo J, Guardiola C, Dolz V. Air mass flow estimation in turbocharged diesel engines from in-cylinder pressure measurement. Experimental Thermal and Fluid Science. 2010;34:37-47.
Cervantes-Uc JM, Cauich-Rodríguez JV, Vázquez-Torres H, Garfias-Mesías LF, Paul DR. Thermal degradation of commercially available organoclays studied by TGA–FTIR. Thermochimica Acta. 2007;457:92-102.
Cervantes-Uc J, Espinosa JM, Cauich-Rodriguez J, Avila-Ortega A, Vazquez-Torres H, Marcos-Fernandez A, et al. TGA/FTIR studies of segmented aliphatic polyurethanes and their nanocomposites prepared with commercial montmorillonites. Polymer Degradation and Stability. 2009;94:1666-77.
Coutinho FM, Delpech MC. Degradation profile of films cast from aqueous polyurethane dispersions. Polymer degradation and Stability. 2000;70:49-57.
Javni I, Petrović ZS, Guo A, Fuller R. Thermal stability of polyurethanes based on vegetable oils. J Appl Polym Sci. 2000;77:1723-34.
Sahoo NG, Jung YC, So HH, Cho JW. Synthesis of polyurethane nanocomposites of functionalized carbon nanotubes by in-situ polymerization methods. Journal of the Korean Physical Society. 2007; 51:S1-6.
Zhang L, Zhang M, Hu L, Zhou Y. Synthesis of rigid polyurethane foams with castor oil-based flame retardant polyols. Industrial Crops and Products. 2014;52:380-8.
Gao X, Zhou B, Guo Y, Zhu Y, Chen X, Zheng Y, et al. Synthesis and characterization of well-dispersed polyurethane/CaCO 3 nanocomposites. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2010;371:1-7.
Choi DS, Zhang Z, Pachauri N. Nanoengineered material applications in electronics, biology, and energy harnessing. Microelectronics to Nanoelectronics: Materials, Devices & Manufacturability. 2012:350-69.
Thakur S, Karak N. Castor oil-based hyperbranched polyurethanes as advanced surface coating materials. Progress in Organic Coatings. 2013;76:157-64.
