Thermogravimetric kinetic analysis of Malaysian poultry processing waste material under inert and oxidative atmospheres

Authors

  • N. Aniza Department of Mechanical Engineering, Universiti Teknologi Petronas, 32610 Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia
  • S. Hassan Department of Mechanical Engineering, Universiti Teknologi Petronas, 32610 Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia
  • M. Inayat Department of Mechanical Engineering, Universiti Teknologi Petronas, 32610 Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia

DOI:

https://doi.org/10.15282/jmes.10.2.2016.1.0185

Keywords:

TGA; combustion; pyrolysis; kinetic analysis.

Abstract

The aim of this work is to investigate the thermal behaviour of Malaysian poultry waste under oxidation and inert atmospheres. The poultry processing dewatered sludge (PPDS) derived from poultry waste was considered as a raw material. The study was conducted in the LABSYS Evo Setaram thermogravimetric analyser (TGA). The temperature was ramped from 30°C to 800°C in oxygen and nitrogen atmospheres at heating rates 5, 10, 15, and 20 K/min. The devolatilization process was more reactive in combustion than that in pyrolysis as evaluated from the derivative thermogravimetric (DTG) peak height and peak temperature at the second stage. In addition, a kinetic parameter called the activation energy of TGA combustion was consistently higher than pyrolysis at each conversion. The activation energy ranged from 127.32 to 245.47 kJ/mol and 88.86 to 133.13 kJ/mol for TGA under combustion and pyrolysis, respectively. The results of the TGA analysis indicate that the combustion and pyrolysis process significantly affect the degradation process of PPDS. The sample fuel properties and activation energy data obtained in this study may be beneficial for further development of thermochemical conversion (TCC) application of biomass through the computational fluid dynamics (CFDs) software.

References

Mekhilef S, Saidur R, Safari A, Mustaffa W. Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews. 2011;15:3360- 70.

Al-Kayiem HH, Md Yunus Y. Drying of Empty Fruit Bunches as Wasted Biomass by Hybrid Solar–Thermal Drying Technique. Journal of Mechanical Engineering and Sciences. 2013;5:652-61.

Omer AM. Built environment: Relating the benefits of renewable energy technologies. International Journal of Automotive and Mechanical Engineering. 2012;5:561-75.

Shafie S, Mahlia T, Masjuki H, Andriyana A. Current energy usage and sustainable energy in Malaysia: a review. Renewable and Sustainable Energy Reviews. 2011;15:4370-7.

Saidur R, Atabani A, Mekhilef S. A review on electrical and thermal energy for industries. Renewable and Sustainable Energy Reviews. 2011;15:2073-86.

Azad AK, Rasul MG, Mofijur M, Bhuiya MMK, Mondal SK, Sattar MK. Energy and Waste Management for Petroleum Refining Effluents: A Case Study in Bangladesh. International Journal of Automotive and Mechanical Engineering. 2015;11:2170-87.

Ayu TT, Hailu MH, Hagos FY, Atnaw SM. Energy audit and waste heat recovery system design for a cement rotary kiln in Ethiopia: A case study. International Journal of Automotive and Mechanical Engineering. 2015;12:2983-3002.

Shafie S, Mahlia T, Masjuki H, Ahmad-Yazid A. A review on electricity generation based on biomass residue in Malaysia. Renewable and Sustainable Energy Reviews. 2012;16:5879-89.

Inayat M, Sulaiman SA, Jamil AA, Guangul FM, Atnaw SM. The Study of Temperature Profile and Syngas Flare in Co-gasification of Biomass Feedstock in Throated Downdraft Gasifier. ICGSCE 2014: Springer; 2015. p. 203-10.

Ramli J, Nor Imrah Y, Jeefferie AR, Mahat MM. A study on the Potential of Cost and Energy - A Survey At playford building, University of South Australia. Journal of Mechanical Engineering and Sciences. 2011;1:25-36.

Moreki JC, Keaikitse T. Poultry waste management practices in selected poultry operations around Gaborone, Botswana. International Journal of Current Microbiology and Applied Sciences. 2013;2:240-8.

MyCC. Review of Domestic Broiler Market Kuala Lumpur: Malaysia Competition Commision; 2014.

Singh K, Risse M, Das K, Worley H, Thompson S. Poultry litter as an energy source. Energy. 2007;23:22-3.

Magdziarz A, Werle S. Analysis of the combustion and pyrolysis of dried sewage sludge by TGA and MS. Waste Management. 2014;34:174-9.

Viana MM, Melchert MBM, de Morais LC, Buchler PM, Dweck J. Sewage sludge coke estimation using thermal analysis. Journal of Thermal Analysis and Calorimetry. 2011;106:437-43.

Idris SS, Rahman NA, Ismail K. Combustion characteristics of Malaysian oil palm biomass, sub-bituminous coal and their respective blends via thermogravimetric analysis (TGA). Bioresource technology. 2012;123:581-91.

Cantrell K, Martin J, Ro K. Application of thermogravimetric analysis for the proximate analysis of livestock wastes. Biofuels: ASTM International; 2011.

Sait HH, Hussain A, Salema AA, Ani FN. Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis. Bioresource Technology. 2012;118:382-9.

Sanchez M, Otero M, Gómez X, Morán A. Thermogravimetric kinetic analysis of the combustion of biowastes. Renewable Energy. 2009;34:1622-7.

Makky EA, M. Yusoff M. Bioeconomy: Fermented Waste Management and Pectinases Purification from Thermomyceslanuginosus. Journal of Mechanical Engineering and Sciences. 2014;7:1196-207.

Hasan MF, Halim SZ, Shahariar CM, Quddus N. Mitigation of Agricultural Energy Requirement in Bangladesh using Microalgae Production. Journal of Mechanical Engineering and Sciences. 2013;5:646-51.

Nematizade P, Ghobadian B, Najafi G. Investigation of Fossil Fuels and Liquid Biofuels Blend Properties using Artificial Neural Network. International Journal of Automotive and Mechanical Engineering. 2012;5:639-47.

Abdalla A. Development of Fuel Briquettes From Biomass Residue: Universiti Teknologi PETRONAS; 2013.

Florin N, Maddocks A, Wood S, Harris A. High-temperature thermal destruction of poultry derived wastes for energy recovery in Australia. Waste Management. 2009;29:1399-408.

Biagini E, Barontini F, Tognotti L. Devolatilization of biomass fuels and biomass components studied by TG/FTIR technique. Industrial & Engineering Chemistry Research. 2006;45:4486-93.

Otero M, Sanchez M, Gómez X, Morán A. Thermogravimetric analysis of biowastes during combustion. Waste Management. 2010;30:1183-7.

Jeguirim M, Dorge S, Trouvé G, Said R. Study on the thermal behavior of different date palm residues: characterization and devolatilization kinetics under inert and oxidative atmospheres. Energy. 2012;44:702-9.

El-Sayed SA, Mostafa M. Pyrolysis characteristics and kinetic parameters determination of biomass fuel powders by differential thermal gravimetric analysis (TGA/DTG). Energy Conversion and Management. 2014;85:165-72.

Munir S, Daood S, Nimmo W, Cunliffe A, Gibbs B. Thermal analysis and devolatilization kinetics of cotton stalk, sugar cane bagasse and shea meal under nitrogen and air atmospheres. Bioresource Technology. 2009;100:1413-8.

Muthuraman M, Namioka T, Yoshikawa K. A comparison of co-combustion characteristics of coal with wood and hydrothermally treated municipal solid waste. Bioresource Technology. 2010;101:2477-82.

Slopiecka K, Bartocci P, Fantozzi F. Thermogravimetric analysis and kinetic study of poplar wood pyrolysis. Applied Energy. 2012;97:491-7.

Ma Z, Chen D, Gu J, Bao B, Zhang Q. Determination of pyrolysis characteristics and kinetics of palm kernel shell using TGA–FTIR and model-free integral methods. Energy Conversion and Management. 2015;89:251-9.

Gai C, Dong Y, Zhang T. The kinetic analysis of the pyrolysis of agricultural residue under non-isothermal conditions. Bioresource Technology. 2013;127:298-305.

Shen D, Gu S, Jin B, Fang M. Thermal degradation mechanisms of wood under inert and oxidative environments using DAEM methods. Bioresource Technology. 2011;102:2047-52.

Downloads

Published

2016-09-30

How to Cite

[1]
N. Aniza, S. Hassan, and M. Inayat, “Thermogravimetric kinetic analysis of Malaysian poultry processing waste material under inert and oxidative atmospheres”, J. Mech. Eng. Sci., vol. 10, no. 2, pp. 1943–1955, Sep. 2016.

Similar Articles

<< < 5 6 7 8 9 10 11 12 13 14 > >> 

You may also start an advanced similarity search for this article.