The impact of anti-reflective coating and optical bandpass interference filter on solar cell electrical-thermal performance

Justin C-K Tay; Basil T. Wong; Kok Hing Chong

doi:10.15282/jmes.15.1.2021.16.0616

Authors

Justin C-K Tay Mechanical Engineering, School of Engineering, Faculty of Engineering, Computing & Science, Swinburne University of Technology Sarawak Campus, Jalan Simpang Tiga, 93350, Kuching, Malaysia. Phone: +6082416353 ext 7942; Fax: +6082260813
Basil T. Wong Mechanical Engineering, School of Engineering, Faculty of Engineering, Computing & Science, Swinburne University of Technology Sarawak Campus, Jalan Simpang Tiga, 93350, Kuching, Malaysia. Phone: +6082416353 ext 7942; Fax: +6082260813
Kok Hing Chong Mechanical Engineering, School of Engineering, Faculty of Engineering, Computing & Science, Swinburne University of Technology Sarawak Campus, Jalan Simpang Tiga, 93350, Kuching, Malaysia. Phone: +6082416353 ext 7942; Fax: +6082260813

DOI:

https://doi.org/10.15282/jmes.15.1.2021.16.0616

Keywords:

Antireflective Coating, SolidWorks Simulation, MATLAB/Simulink Simulation, Optical bandpass interference filter, Solar cell heat mitigation

Abstract

Solar cells utilize only the visible region of the electromagnetic spectrum to generate electricity. A great reduction in the temperature of a solar cell resulting from filtering infrared and ultraviolet wavelengths will eventually lead to an increase in efficiency. Here, a detailed analysis of the use of an optical bandpass interference filter with antireflective coating as a potential solution to this problem has been carried out. The optical bandpass filter aims to filter out unwanted wavelengths while the antireflective coating functions to reduce the amount of light reflected from the solar panel surface. A simulation program using SolidWorks (Flow Simulation Study) has been performed to demonstrate the effect of utilizing optical bandpass interference filter with antireflective coating on solar panel and the temperature of each cell layer. The thermal analysis results obtained from SolidWorks were then exported to MATLAB/Simulink to investigate the electrical output parameters. Results showed that optical bandpass interference filter combined with antireflective coating could reduce the temperature of the solar cell by 11.83 Kelvin which led to 14.32% increase in the maximum output power within an hour of exposure to peak solar radiation located in Kuala Lumpur, Malaysia.

References

"BP Statistical Review of World Energy," BP, 2018. Accessed: 20 January 2018. [Online]. Available: https://www.bp.com/content/dam/bp/business-sites/en/global/corporate/pdfs/energy-economics/statistical-review/bp-stats-review-2018-full-report.pdf

L. Fraas, Low Cost Solar Electric Power. Springer International Publishing, 2014.

E. P. Ogherohwo, B. Barnabas, and A. O. Alafiatayo, "Investigating the Wavelength of Light and Its Effects on the Performance of a Solar Photovoltaic Module," International Journal of Innovative Research in Computer Science & Technology, vol. 3, no. 4, pp. 61-65, 2015.

Q. Liu and C. Jia, Analysis of solar cells in different situations. Karlskrona, Sweden: Blekinge Institute of Technology, 2015.

K. Shukla and S. Rangnekar, "A comparative study of exergetic performance of amorphous and polycrystalline solar PV modules," International Journal of exergy, vol. 17, pp. 433-455, 08/24 2015, doi: 10.1504/IJEX.2015.071559.

K. Sudhakar and T. Srivastava, "Energy and exergy analysis of 36 W solar photovoltaic module," International Journal of Ambient Energy, vol. 35, no. 1, pp. 51-57, 2014/01/02 2014, doi: 10.1080/01430750.2013.770799.

D. M. Tobnaghi, R. Madatov, and D. Naderi, "The Effect of Temperature on Electrical Parameters of Solar Cells," International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, vol. 2, no. 12, pp. 6404-6407, 2013.

W. Beachamp and T. Hart, "UV/IR Reflecting solar cell cover," USA Patent 5449413, 1995.

S. Z. Aljoaba, A. M. Cramer, and B. L. Walcott, "Active optimal optical filtering of wavelengths for increasing the efficiency of photovoltaic modules," in 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 8-13 June 2014 2014, pp. 1329-1334, doi: 10.1109/PVSC.2014.6925163.

I. Roppolo, N. Shahzad, A. Sacco, E. Tresso, and M. Sangermano, "Multifunctional NIR-reflective and self-cleaning UV-cured coating for solar cell applications based on cycloaliphatic epoxy resin," Progress in Organic Coatings, vol. 77, no. 2, pp. 458-462, 2014/02/01/ 2014, doi: https://doi.org/10.1016/j.porgcoat.2013.11.009.

C. E. Gouvêa, M. P. Sobrinho, and M. T. Souza, "Spectral Response of Polycrystalline Silicon Photovoltaic Cells under Real-Use Conditions," Energies, vol. 10, no. 8, p. 1178, 2017, doi: https://doi.org/10.3390/en10081178.

K. Sudhakar, N. Jain, and S. Bagga, "Effect of color filter on the performance of solar photovoltaic module," in 2013 International Conference on Power, Energy and Control (ICPEC), 6-8 Feb. 2013 2013, pp. 35-38, doi: 10.1109/ICPEC.2013.6527620.

W.-J. Ho, J.-C. Lin, J.-J. Liu, W.-B. Bai, and H.-P. Shiao, "Electrical and Optical Characterization of Sputtered Silicon Dioxide, Indium Tin Oxide, and Silicon Dioxide/Indium Tin Oxide Antireflection Coating on Single-Junction GaAs Solar Cells," Materials, vol. 10, no. 7, p. 700, 2017, doi: https://doi.org/10.3390/ma10070700.

V. K. Jain and A. P. Kulshreshtha, "Indium-Tin-Oxide transparent conducting coatings on silicon solar cells and their “figure of merit”," Solar Energy Materials, vol. 4, no. 2, pp. 151-158, 1981/01/01/ 1981, doi: https://doi.org/10.1016/0165-1633(81)90038-1.

M. Ciobanu, J. P. Wilburn, M. L. Krim, and D. E. Cliffel, "1 - Fundamentals," in Handbook of Electrochemistry, C. G. Zoski Ed. Amsterdam: Elsevier, 2007, pp. 3-29.

R. Kishore, S. N. Singh, and B. K. Das, "PECVD grown silicon nitride AR coatings on polycrystalline silicon solar cells," Solar Energy Materials and Solar Cells, vol. 26, no. 1, pp. 27-35, 1992/03/01/ 1992, doi: https://doi.org/10.1016/0927-0248(92)90123-7.

K. Seshan, Handbook of Thin Film Deposition. William Andrew, 2012.

H. Bellia, R. Youcef, and M. Fatima, "A detailed modeling of photovoltaic module using MATLAB," NRIAG Journal of Astronomy and Geophysics, vol. 3, no. 1, pp. 53-61, 2014/06/01/ 2014, doi: https://doi.org/10.1016/j.nrjag.2014.04.001.

P. S. Paul, S. Mondal, N. Akter, and S. M. Mominuzzaman, "Modeling combined effect of temperature and irradiance on solar cell parameters by MATLAB/ simulink," in 8th International Conference on Electrical and Computer Engineering, 20-22 Dec. 2014 2014, pp. 512-515, doi: 10.1109/ICECE.2014.7026896.

H. Ibrahim and N. Anani, "Variations of PV module parameters with irradiance and temperature," Energy Procedia, vol. 134, pp. 276-285, 2017/10/01/ 2017, doi: https://doi.org/10.1016/j.egypro.2017.09.617.

B. Swatowska, T. Stapinski, K. Drabczyk, and P. Panek, The Role of Antireflection Coatings in Silicon Solar Cells – The Influence on Their Electrical Parameters. 2011, p. 487.

D. K. Pandey, R. B. Lee, and J. Paden, "Effects of atmospheric emissivity on clear sky temperatures," Atmospheric Environment, vol. 29, no. 16, pp. 2201-2204, 1995/08/01/ 1995, doi: https://doi.org/10.1016/1352-2310(94)00243-E.

Y. A. Cengel and A. J. Ghajar, Heat and mass transfer : fundamentals & applications. (in English), 2015.

M. Hammami, S. Torretti, F. Grimaccia, and G. Grandi, "Thermal and Performance Analysis of a Photovoltaic Module with an Integrated Energy Storage System," Applied Sciences, vol. 7, no. 11, 2017, doi: 10.3390/app7111107.

D. Rajput, "Effect Of Dust On The Performance Of Solar PV Panel," International Journal of ChemTech Research, vol. 5, pp. 1083-1086, 03/15 2013.

J. Adeeb, A. Farhan, and A. Al-Salaymeh, "Temperature Effect on Performance of Different Solar Cell Technologies," Ecological Engineering, vol. 20, pp. 249–254, 05/01 2019, doi: 10.12911/22998993/105543.

R. Manning and J. Ewing, "Temperature in Cars Survey," RACQ Vehicle Technologies Department, 2009.

M. A. Islam, A. Merabet, R. Beguenane, and H. Ibrahim, "Modeling solar photovoltaic cell and simulated performance analysis of a 250W PV module," in 2013 IEEE Electrical Power & Energy Conference, 21-23 Aug. 2013 2013, pp. 1-6, doi: 10.1109/EPEC.2013.6802959.

L. Idoko, O. Anaya-Lara, and A. McDonald, "Enhancing PV modules efficiency and power output using multi-concept cooling technique," Energy Reports, vol. 4, pp. 357-369, 11/01 2018, doi: 10.1016/j.egyr.2018.05.004.