Volume 14 No. 1 (March 2020)

Article

• Stress behaviour across human tooth by temperature gradient resulting of laser irradiation

  S. Falahatkar, A. Nouri-Borujerdi, M. Najafi

  6218 - 6228

  • pdf

• Thrombectomy aspiration device geometry optimization for removal of blood clots in cerebral vessels

  C. Talayero, G. Romero, G. Pearce, J. Wong

  6229 - 6237

  • pdf

• Modeling of blood clot removal with aspiration Thrombectomy devices

  G. Romero, C. Talayero, G. Pearce, J. Wong

  6238 - 6250

  • pdf

• Vibrations analysis of combine harvester seat in time and frequency domain

  Ahmad Jahanbakhshi, Bahram Ghamari, Kobra Heidarbeigi

  6251 - 6258

  • pdf

• Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding

  Srinivasa Rao Pedapati, Dhanish Paramaguru, Mokhtar Awang, Hamed Mohebbi, Sharma V Korada

  6259 - 6271

  • pdf

• Ring Rolling speed rolls optimization to improve ring quality and reduce production time

  Gabriele Allegri, Luca Giorleo

  6272 - 6284

  • pdf

• Performance and exhaust gases of a diesel engine using different magnetic treatments of the fuel

  R. Arias Gilart, M. R. B. Ungaro, C. E. A. Rodríguez, J. F. F. Hernández, M. C. Sofia, D. D. Verdecia

  6285 - 6294

  • pdf

• Optimization of drilling process parameters on delamination factor of Jute reinforced unsaturated polyester composite using Box-Behnken design of experiment

  Zaleha Mustafa, N. H. Idrus, A B. Mohd Hadzley, D. Sivakumar, M. Y. Norazlina, S. H. S. M. Fadzullah, A. Anjang, K. Thongkaew

  6295 - 6303

  • pdf

• Optimization of a three-layer rotary generator using genetic algorithm to minimize fuel consumption

  Hamid Abroshan, Mahdi Goodarzi

  6304 - 6321

  • pdf

• Turbulent kinetic energy and self-sustaining tones: Experimental study of a rectangular impinging jet using high Speed 3D tomographic Particle Image Velocimetry

  Hassan Hasan Assoum, Jana Hamdi, Mouhammad El Hassan, Kamel Abed-Meraim, M. El Kheir, T. Mrach, S. El Asmar, Anas Sakout

  6322 - 6333

  • pdf

• Experimental study of the influence of glass cover cooling using evaporative cooling process on the thermal performance of single basin solar still

  Manjunath Mallashetty Shivamallaiah, S.V. Kota Reddy, V Shrikanth, Gagan Shetty, S. A. Rakesh, Jinu Mary John, Suhaib Ahmed, Afnan Aftab

  6334 - 6343

  • pdf

• A study of turbulent heat transfer in convergent-divergent shaped microchannel with ribs and cavities using CFD

  Pankaj Srivastava, Anupam Dewan

  6344 - 6361

  • pdf

• An improved control rod selection algorithm for core power control at TRIGA PUSPATI Reactor

  Mohd Sabri Minhat, Nurul Adilla Mohd Subha, Fazilah Hassan, Norjulia Mohamad Nordin

  6362 - 6379

  • pdf

• Study on numerical analysis of dynamic parameters of mobile walking robot

  Mikhail Polishchuk, Mykyta Suyazov, Mark Opashnyansky

  6380 - 6392

  • pdf

• Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding

  Luqman Hakim Ahmad Shah, Abdelbaset Midawi, Scott Walbridge, Adrian Gerlich

  6393 - 6402

  • pdf

• Composite patch reinforcement of a cracked simply-supported beam traversed by moving mass

  M. S. Aldlemy, S. A. K. Al-jumaili, R. A. M. Al-Mamoori, T. Ya, Reza Alebrahim

  6403 - 6415

  • pdf

• Comparison of different additive manufacturing patterns on the performance of rapid vacuum casting for mating parts via the Taguchi method

  Nur Nabilah Mohd Mustafa, Aini Zuhra Abdul Kadir, N. H. Akhmal Ngadiman, A. Ma'aram, K. Zakaria

  6417 - 6429

  • pdf

• A cuckoo search based neural network to predict fatigue life in rotor blade composites

  Khaled Ziane, Adrian Ilinca, Abdullah Khan, Soraya Zebirate

  6430 - 6442

  • pdf

• The properties of slag-silica fume ternary blended mortar with quarry dust

  Chow Wee Kang, Cheah Chee Ban, Oo Chuan Wei, Part Wei Ken, Leow Khang Heng

  6443 - 6451

  • pdf

• Ballistic performance of the steel-aluminium metal laminate panel for armoured vehicle

  Shahrum Abdullah, M. F. Abdullah, W. N. M Jamil

  6452 - 6460

  • pdf

• Analysis of tool vibration and surface roughness with tool wear progression in hard turning: An experimental and statistical approach

  Nitin Ambhore, Dinesh Kamble, Satish Chinchanikar

  6461 - 6472

  • pdf

• Effects of geometric variations on buckling properties of carbon nanostructures: A finite element analysis

  Farya Golesorkhie, Mani Navi

  6473 - 6487

  • pdf

• Experimental and simulation study of mild steel response to lateral quasi-static compression

  Omar Abdulhasan Lafta, Minah Mohammed Fareed, Md Radzai Said

  6488 - 6496

  • pdf

• Effect of chip load and spindle speed on cutting force of Hastelloy X

  Nor Aznan Mohd Nor, B. T. H. T. Baharudin, J. A. Ghani, Z. Leman, M. K. A. Ariffin

  6497 - 6503

  • pdf

• Deformation mechanics of sputtered copper layers during nanoindentation tests

  M. A. A. Afripin, N. A. Fadil, M. Nasir Tamin

  6504 - 6513

  • pdf

• Thermal shock resistance of yttrium aluminium oxide Y3Al5O12 thermal barrier coating for titanium alloy

  Mohammed A. Almomani, Mohamad I. Al-Widyan, Sulaiman M. Mohaidat

  6514 - 6525

  • pdf

• Effect of airfoil distance to water surface on static stall

  Y. Azargoon, M. H. Djavareshkian, E. Esmaeilifar

  6526 - 6537

  • pdf