Optimization of exoskeleton design for post-stroke ankle rehabilitation based on kinematic and structural model evaluation
DOI:
https://doi.org/10.15282/jmes.19.3.2025.8.0846Keywords:
Exoskeleton design engineering, simulation, ankle, stroke rehabilitationAbstract
Ankle rehabilitation is an important indicator of walking ability recovery because it is used as a marker of early recovery of mobility function in post-stroke patients. Robot-assisted ankle rehabilitation has been proven to be more optimal for restoring range of motion, balance, and gait proprioception in patients. This study aims to optimize the design of an ankle rehabilitation exoskeleton through structural simulation, biomechanical alignment, and efficiency based on several alternative actuator designs. Alternative exoskeleton designs are focused on the rehabilitation of dorsiflexion-plantar flexion and inversion-eversion movements. The analysis method for assessing the best exoskeleton design alternatives uses an engineering design methodology approach based on static and dynamic test parameters, namely kinematics and FEA. The results of the design engineering implementation show that the exoskeleton design with Concept B is more efficient based on several mechanical test parameters compared to Concept A. Simulation results show that Design B alternative is superior in all test parameters with a value of (4.22 versus 3.68) in the safety factor, a lower peak stress of (30.43 MPa versus 39.15 MPa), and produces energy efficiency with lower torque requirements. The mechanical stability of Concept B is characterized by using a more efficient actuator design with superior safety improvements for users. Based on the parameters and characteristics of the simulation test using design engineering, Design B is more feasible to be developed as a robotic mechanical system for the needs of post-stroke patient ankle rehabilitation.
References
[1] V. L. Feigin, G. A. Roth, M. Naghavi, P. Avan, C. Barker, E. Brainin, et al., “World stroke organization (WSO): Global stroke fact sheet 2022,” International Journal of Stroke, vol. 17, no. 1, pp. 18-29, 2022.
[2] A. K. Boehme, C. Esenwa, M. S. V. Elkind, “Stroke risk factors, genetics, and prevention,” Circulation Research, vol. 120, no. 3, pp. 472-495, 2017.
[3] W. J. Tu, S. J. Wang, S. Yin, X. Xu, R. Y. Zheng, L. L. Zeng, et al., “China stroke surveillance report 2021,” Military Medical Research, vol. 10, no. 1, p. 33, 2023.
[4] U. B. Flansbjer, A. M. Holmbäck, D. Downham, C. Patten, J. Lexell, “Reliability of gait performance tests in men and women with hemiparesis after stroke,” Journal of Rehabilitation Medicine, vol. 37, no. 2, pp. 75-82, 2005.
[5] J. Hayakawa, S. Ohtsuka, R. Hashimoto, T. Kanai, T. Wakasa, M. Tsukagoshi, “Reliability of and minimal detectable changes in gait performance tests in patients with chronic hemiplegic stroke,” Journal of Stroke Medicine, vol. 3, no. 1, pp. 34-39, 2020.
[6] A. Bourgeois, B. Rice, C. H. Goh, “Design optimization of the lift mechanism in the robotic walking training device using the engineering design methodology,” Applied Sciences, vol. 14, no. 1, p. 327, 2024.
[7] A. Roy, H. I. Krebs, D. J. Williams, C. T. Bever, L. W. Forrester, R. F. Macko, et al., “Robot-aided neurorehabilitation: A novel robot for ankle rehabilitation,” IEEE Transactions on Robotics, vol. 25, no. 3, pp. 569-582, 2009.
[8] M. Shi, C. Yang, D. Zhang, “A novel human-machine collaboration model of an ankle joint rehabilitation robot driven by EEG signals,” Mathematical Problems in Engineering, vol. 2021, p. 5564235, 2021.
[9] Q. Meng, G. Liu, X. Xu, Q. Meng, H. Yu, “Design and analysis of a supine ankle rehabilitation robot for early stroke recovery,” Machines, vol. 11, no. 8, p. 787, 2023.
[10] J. Li, K. Yang, D. Yang, “Wearable ankle assistance robot for a human walking with different loads,” Mechanical Sciences, vol. 14, no. 2, pp. 429-438, 2023.
[11] J. Bessler, A. L. Prange-Lasonder, R. Schaake, J. H. Buurke, G. B. Rietman, A. Melendez-Calderon, “Safety assessment of rehabilitation robots: A review identifying safety skills and current knowledge gaps,” Frontiers in Robotics and AI, vol. 8, p. 602878, 2021.
[12] A. Giallanza, G. La Scalia, R. Micale, C. M. La Fata, “Occupational health and safety issues in human-robot collaboration: State of the art and open challenges,” Safety Science, vol. 169, p. 106313, 2024.
[13] R. Barkataki, Z. Kalita, S. Kirtania, “Anthropomorphic design and control of a polycentric knee exoskeleton for improved lower limb assistance,” Intelligent Service Robotics, vol. 17, no. 3, pp. 555-577, 2024.
[14] R. S. Gonçalves, L. A. O. Rodrigues, R. Humbert, G. Carbone, “A user-friendly nonmotorized device for ankle rehabilitation,” Robotics, vol. 12, no. 2, p. 32, 2023.
[15] J. Narayan, S. Kumar Dwivedy, “Preliminary design and development of a low-cost lower-limb exoskeleton system for paediatric rehabilitation,” Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, vol. 235, no. 5, pp. 530-545, 2021.
[16] S. H. Collins, M. Bruce Wiggin, G. S. Sawicki, “Reducing the energy cost of human walking using an unpowered exoskeleton,” Nature, vol. 522, no. 7555, pp. 212-215, 2015.
[17] A. Bourgeois, B. Rice, C. H. Goh, “Design optimization of the lift mechanism in the robotic walking training device using the engineering design methodology,” Applied Sciences, vol. 14, no. 1, p. 327, 2024.
[18] C. L. Brockett, G. J. Chapman, “Biomechanics of the ankle,” Orthopaedics and Trauma, vol. 30, no. 3, pp. 232-238, 2016.
[19] R. K. Salih, W. S. Aboud, “Smart robotic exoskeleton: Constructing using 3D printer technique for ankle-foot rehabilitation,” Journal of Robotics and Control, vol. 4, no. 4, pp. 537-547, 2023.
[20] J. M. Medina McKeon, M. C. Hoch, “The ankle-joint complex: A kinesiologic approach to lateral ankle sprains,” Journal of Athletic Training, vol. 54, no. 6, pp. 589-602, 2019.
[21] Z. Nursultan, C. Marco, G. Balbayev, “A portable robotic system for ankle joint rehabilitation,” Electronics, vol. 12, no. 20, p. 4271, 2023.
[22] C. Alves, A. Whiteley, C. Jennings, L. Murphy, J. Walsh, A. Burns, et al., “Plantar flexion, dorsiflexion, range of movement and hindfoot deviation are important determinants of foot function in children,” Journal of Children's Orthopaedics, vol. 13, no. 5, pp. 486-499, 2019.
[23] S. Nagarajan, K. Mohanavelu, S. Sujatha, “A simulation-based framework to determine the kinematic compatibility of an augmentative exoskeleton during walking,” Robotics, vol. 13, no. 5, p. 79, 2024.
[24] M. D. C. Sanchez-Villamañan, J. Gonzalez-Vargas, D. Torricelli, J. C. Moreno, J. L. Pons, “Compliant lower limb exoskeletons: A comprehensive review on mechanical design principles,” Journal of NeuroEngineering and Rehabilitation, vol. 16, no. 1, p. 55, 2019.
[25] E. W. Abryandoko, S. Susmartini, P. W. Laksono, L. Herdiman, “Simulation and modeling of hybrid assistive robotic neuromuscular dynamic stimulation for upper limb rehabilitation,” Journal of Applied Science and Engineering, vol. 28, no. 5, pp. 925-933, 2025.
[26] H. Ren, T. Liu, J. Wang, “Design and analysis of an upper limb rehabilitation robot based on multimodal control,” Sensors, vol. 23, no. 21, p. 8801, 2023.
[27] B. Li, B. Yuan, J. Chen, Y. Zuo, Y. Yang, “Mechanical design and human-machine coupling dynamic analysis of a lower extremity exoskeleton,” in Lecture Notes in Computer Science, vol. 10462, pp. 593-604, 2017.
[28] G. Sergazin, K. Kappassov, A. Adiyatov, A. Massalin, A. Varol, H. A. Varol, “Design, simulation and functional testing of a novel ankle exoskeleton with 3DOFs,” Sensors, vol. 24, no. 19, p. 6160, 2024.
[29] S. Grazioso, T. Caporaso, and G. Di Gironimo, “Decision support in engineering design: The ELIGERE open source software platform,” International Journal on Interactive Design and Manufacturing, vol. 18, no. 1, pp. 509-524, 2024.
[30] B. Zhang, M. Ma, Z. Wang, “Promoting active aging through assistive product design innovation: A preference-based integrated design framework,” Frontiers in Public Health, vol. 11, p. 1203830, 2023.
[31] S. Głowiński, T. Krzyżyński, S. Pecolt, I. Maciejewski, “Design of motion trajectory of an arm exoskeleton,” Archive of Applied Mechanics, vol. 85, no. 1, pp. 75-87, 2015.
[32] L. Zhang, Y. Liu, R. Wang, C. Smith, E. M. Gutierrez-Farewik, “Modeling and simulation of a human knee exoskeleton's assistive strategies and interaction,” Frontiers in Neurorobotics, vol. 15, p. 620928, 2021.
[33] S. Śpiewak, T. Gzik-Zroska, D. Gzik, K. Joszko, S. Wolański, M. Gzik, et al., “Modeling and strength calculations of parts made using 3D printing technology and mounted in a custom-made lower limb exoskeleton,” Materials, vol. 17, no. 14, p. 3406, 2024.
[34] L. Sha, A. Lin, X. Zhao, S. Kuang, “A topology optimization method of robot lightweight design based on the finite element model of assembly and its applications,” Science Progress, vol. 103, no. 3, pp. 1-16, 2020.
[35] N. A. Bianco, S. H. Collins, K. Liu, S. L. Delp, “Simulating the effect of ankle plantarflexion and inversion-eversion exoskeleton torques on center of mass kinematics during walking,” PLoS Computational Biology, vol. 19, no. 8, p. e1010712, 2023.
[36] A. Rojas, J. Ronceros, C. Raymundo, G. Zapata, L. Vinces, G. Ronceros, “Numerical simulation and design of a mechanical structure of an ankle exoskeleton for elderly people,” Technologies, vol. 12, no. 7, p. 107, 2024.
[37] M. Cempini, S. M. M. De Rossi, T. Lenzi, N. Vitiello, M. C. Carrozza, “Self-alignment mechanisms for assistive wearable robots: A kinetostatic compatibility method,” IEEE Transactions on Robotics, vol. 29, no. 1, pp. 236-250, 2013.
[38] M. O. Ajayi, K. Djouani, Y. Hamam, “Interaction control for human-exoskeletons,” Complexity, vol. 2020, p. 8472510, 2020.
[39] G. M. Achilli, G. Logozzo, M. C. Valigi, S. Strainovic, A. Coppa, C. Canali, et al., “Soft, rigid, and hybrid robotic exoskeletons for hand rehabilitation: Roadmap with impairment-oriented rationale for devices design and selection,” Applied Sciences, vol. 13, no. 20, p. 11287, 2023.
[40] M. M. Rodgers, G. Alon, V. M. Pai, R. S. Conroy, “Wearable technologies for active living and rehabilitation: Current research challenges and future opportunities,” Journal of Rehabilitation and Assistive Technologies Engineering, vol. 6, pp. 1-9, 2019.
[41] G. Kwakkel, J. Collier, J. M. Veerbeek, P. Nene, B. Jurcovicova, B. Molad, et al., “Motor rehabilitation after stroke: European stroke organisation (ESO) consensus-based definition and guiding framework,” European Stroke Journal, vol. 8, no. 4, pp. 851-868, 2023.
[42] M. F. Hamza, R. A. R. Ghazilla, B. B. Muhammad, H. J. Yap, “Balance and stability issues in lower extremity exoskeletons: A systematic review,” Biocybernetics and Biomedical Engineering, vol. 40, no. 4, pp. 1666-1685, 2020.
[43] T. Wang, B. Peng, B. Zhang, T. Duan, W. Wei, M. O. Tokhi, et al., “A review on the rehabilitation exoskeletons for the lower limbs of the elderly and the disabled,” Electronics, vol. 11, no. 3, p. 388, 2022.
[44] S. K. Hasan, A. K. Dhingra, “Performance verification of different control schemes in human lower extremity rehabilitation robot,” Results in Control and Optimization, vol. 4, p. 100028, 2021.
[45] R. Rituraj, R. Scheidl, P. Ladner, M. Lauber, A. Plöckinger, “Prototyping and experimental investigation of digital hydraulically driven knee exoskeleton,” Energies, vol. 15, no. 22, p. 8695, 2022.
[46] R. Rituraj, R. Scheidl, P. Ladner, M. Lauber, A. Plöckinger, “Prototyping and experimental investigation of digital hydraulically driven knee exoskeleton,” Energies, vol. 15, no. 22, p. 8695, 2022.
[47] M. Paterna, C. De Benedictis, C. Ferraresi, “Preliminary testing of a passive exoskeleton prototype based on McKibben muscles,” Machines, vol. 12, no. 6, p. 388, 2024.
[48] Z. Zhu, L. Liu, W. Zhang, C. Jiang, X. Wang, J. Li, “Design and motion control of exoskeleton robot for paralyzed lower limb rehabilitation,” Frontiers in Neuroscience, vol. 18, pp. 1-19, 2024.
[49] P. Falkowski, K. Jeznach, “Simulation of a control method for active kinesiotherapy with an upper extremity rehabilitation exoskeleton without force sensor,” Journal of NeuroEngineering and Rehabilitation, vol. 21, no. 1, p. 67, 2024.
[50] A. KhalilianMotamed Bonab, D. Chiaradia, A. Frisoli, and D. Leonardis, “A framework for modeling, optimization, and musculoskeletal simulation of an elbow–wrist exosuit,” Robotics, vol. 13, no. 4, p. 60, 2024.
[51] I. Ben Abdallah, Y. Bouteraa, “An optimized stimulation control system for upper limb exoskeleton robot-assisted rehabilitation using a fuzzy logic-based pain detection approach,” Sensors, vol. 24, no. 4, p. 1047, 2024.
[52] K. Kiguchi, M. H. Rahman, M. Sasaki, K. Teramoto, “Development of a 3DOF mobile exoskeleton robot for human upper-limb motion assist,” Robotics and Autonomous Systems, vol. 56, no. 8, pp. 678-691, 2008.
[53] G. Mashud, S. K. Hasan, N. Alam, “Advances in control techniques for rehabilitation exoskeleton robots: A systematic review,” Actuators, vol. 14, no. 3, p. 108, 2025.
[54] J. Li, Y. Tai, F. Meng, “Rehabilitation exoskeleton torque control based on PSO-RBFNN optimization,” PLoS One, vol. 18, no. 8, p. e0285453, 2023.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
