Volume 14 No. 3, September 2020

Article

• Experimental comparison of sinusoidal motion and non-sinusoidal motion of rise-dwell-fall-dwell in a Stirling engine

  H.M. Wong, S.Y. Goh

  6971 - 6981

  • pdf

• Numerical simulation of foil with leading-edge tubercle for vertical-axis tidal-current turbine

  I Ketut Aria Pria Utama, Dendy Satrio, Mukhtasor Mukhtasor, Mehmet Atlar, Weichao Shi, Ridho Hantoro, Giles Thomas

  6982 - 6992

  • pdf

• Design of a new steerable in-pipe inspection robot and its robust control in presence of pipeline flow

  Hami Tourajizadeh, Amirhosein Sedigh, Vahid Boomeri, Mohammad Rezaei

  6993 - 7016

  • pdf

• Performance estimation of computed torque control for surgical robot application

  Varnita Verma, A. Gupta, M. K. Gupta, P. Chauhan

  7017 - 7028

  • pdf

• Computational analysis to predict the effect of pre-bifurcation stenosis on the hemodynamics of the internal and external carotid arteries

  Hugo Bouteloup, Johann Guimaraes de Oliveira Marinho, Surapong chatpun, Daniel M. Espino

  7029 - 7039

  • pdf

• Rotordynamics analysis of a single helical gear transmission system for high speed applications

  Najeeb Ullah, C. Xi, T. Cong, H. Yucheng

  7040 - 7048

  • pdf

• Effect of strain energy on the grain growth behaviour of ultrafine-grained iron-chromium alloy by equal channel angular pressing

  Muhammad Rifai, Hiroyuki Miyamoto

  7049 - 7057

  • pdf

• Characteristic of thermoplastics corn starch composite reinforced short pineapple leaf fibre by using laminates method

  Nazri Huzaimi Zakaria, Mohd Zamani Ngali, Mohd Zulkefli Selamat, Fudhail Abdul Munir, Mohd Asyraf Aman

  7058 - 7070

  • pdf

• Walking simulation model of lower limb exoskeleton robot design

  M. R. Sapiee, M. H. M. Marhaban, M. F. Miskon, A. J. Ishak

  7071 - 7081

  • pdf

• Comparison of the performance of oscillating water column devices based on arrangements of water columns

  Jahirwan Ut Jasron, Sudjito Soeparmani, Lilis Yuliati, Djarot B. Darmadi

  7082 - 7093

  • pdf

• Characterization of aluminium matrix composite of Al-ZnSiFeCuMg alloy reinforced with silica sand tailings particles

  Sukanto ., Rudy Soenoko, Wahyono Suprapto, Yudy Surya Irawan

  7094 - 7108

  • pdf

• Investigation of the natural ventilation of wind catchers with different geometries in arid region houses

  Nasreddine Sakhri, Younes Menni, Houari Ameur, Ali J. Chamkha, Noureddine Kaid, Mohammed Bensafi, Giulio Lorenzini, Oluwole Daniel Makinde

  7109 - 7124

  • pdf

• The dependency of the microhardnes on microstructure and solidification parameters of directionally solidified Al–4.5wt.%Cu in clay mold

  Dedy Masnur, Viktor Malau, Suyitno Suyitno

  7125 - 7131

  • pdf

• Life cycle analysis of hybrid oil palm/glass fibre-reinforced polyurethane composites for automotive crash box

  N.S.B. Yusof, S.M. Sapuan, M.T.H. Sultan, M. jawaid

  7132 - 7140

  • pdf

• Representation of bolted joints in a structure using finite element modelling and model updating

  R. Omar, M. N. Abdul Rani, M. A. Yunus

  7141 - 7151

  • pdf

• Analysis of the vertical moving table type broaching machine

  Okka Adiyanto, Park In Soo, Angga Senoaji Hermanto, Choi Won Sik

  7152 - 7169

  • pdf

• Strain rates effect of dynamic compression properties of E-glass / jute composite

  Muhamad Shahirul Mat Jusoh, Mohd Yazid Yahya, Haris Ahmad Israr Ahmad

  7162 - 7169

  • pdf

• Prediction of fatigue life of aluminum 2024-T3 at low temperature by finite element analysis

  S. Mazlan, N. Yidris, R. Zahari, E. Gires, D.L.A. Majid, K.A. Ahmad

  7170 - 7180

  • pdf

• Effect of dome size on flow dynamics in saccular aneurysms – A numerical study

  Sathvik Nayak H. S., Nitesh Kumar, S. M. A. Khader, Raghuvir Pai

  7181 - 7190

  • pdf

• Factorial design approach to investigate the significance of factors on the fire resistant, compression and adhesion properties of geopolymer binder

  M.B. Mohd Salahuddin, N. Mazlan, F. Mustapha, M.R. Ishak, A.A. Saprudin

  7191 - 7204

  • pdf

• A comparative study on the vibration of functionally graded Magneto-Electro-Elastic rectangular plate rested on a Pasternak foundation based on exponential and first-order shear deformation theories

  Hamidreza Talebi Amanieh, Seyed Alireza Seyed Roknizadeh, Arash Reza

  7205 - 7221

  • pdf

• Characterization of deformation behaviour and fracture mode of recycled aluminium alloys (AA6061) subjected to high-velocity impact

  Choon Sin Ho, Mohd Khir Mohd Nor

  7222 - 7234

  • pdf

• Nonlinear dynamics of a shell encapsulated microbubble near solid boundary in an ultrasonic field

  N.M. Ali, F. Dzaharudin, E.A. Alias

  7235 - 7243

  • pdf

• Preparation, stability and wettability of nanofluid: A review

  W. Safiei, M.M. Rahman, A.R. Yusoff, M.R. Radin

  7244 - 7257

  • pdf

• Finite element analysis of drilling unidirectional CFRP in different ply orientation

  H. Sanusi, M.S. Hussin, A.R. Yuzairi, L.H. Peng, M.F.A. Ahmad

  7258 - 7268

  • pdf

• Numerical analysis and explore of asymmetrical fluid flow in a two-sided lid-driven cavity

  El Amin Azzouz, Samir Houat

  7269 - 7281

  • pdf

• CFD analysis for thermal performance augmentation of solar air heater using deflector ribs

  R. Venkatesh, Nitesh Kumar, N. Madhwesh, Manjunath M.S.

  7282 - 7295

  • pdf

• Evaluation of geometrical benchmark artifacts containing multiple overhang lengths fabricated using material extrusion technique

  Siti Nur Humaira Mazlan, Aini Zuhra Abdul Kadir, N. H. A. Ngadiman, M.R. Alkahari

  7296 - 7308

  • pdf

• Wavelet transform based features of skin blood flow response signal for pressure ulcer evaluation

  Saliza Ramli, Raja Kamil, Siti Anom Ahmad, Norhafizah Mohtaruddin, Rozi Mahmud

  7309 - 7318

  • pdf