Effects of payment method on work control, work risk and work-related musculoskeletal health among sewing machine operators

R.  Nawawi; B.M.  Deros; D.D.I.  Daruis; A.  Ramli; R.M.  Zein; L.H.  Joseph

doi:10.15282/jmes.9.2015.16.0164

Authors

R. Nawawi Dept. of Mechanical and Materials Engineering Faculty of Engineering & Built Environment Universiti Kebangsaan Malaysia, Malaysia
B.M. Deros Dept. of Mechanical and Materials Engineering Faculty of Engineering & Built Environment Universiti Kebangsaan Malaysia, Malaysia
D.D.I. Daruis Faculty of Engineering, Universiti Pertahanan Nasional Malaysia, Malaysia
A. Ramli Department of Physiotherapy Faculty of Science, Lincoln University College, Malaysia
R.M. Zein Department of Consultation, Research & Development, National Institute of Occupational Safety and Health (NIOSH), Malaysia
L.H. Joseph Department of Physiotherapy Faculty of Science, Lincoln University College, Malaysia

DOI:

https://doi.org/10.15282/jmes.9.2015.16.0164

Keywords:

Musculoskeletal disorders, sewing machine operators, risk factors, symptoms.

Abstract

This study aimed to identify payment method and its effects on work control, work risk and work-related musculoskeletal health among Malaysian sewing machine operators. The study sample comprised 337 sewing machine operators (male, n=122, female, n=215; aged between 18-54 years old; mean 30.74±8.44) from four different garmentmaking companies in Malaysia. They were being paid via time rate wages (n=246) and piece rate wages (n=91). Data was collected through Nordic Musculoskeletal Questionnaire and pen-and-paper assessment via Rapid Upper Limb Assessment (RULA). From the study, the piece rate wage group was found to take fewer breaks, had high work production demands, worked at a faster pace and experienced more exhaustion and pressure due to increasing work demands as compared to the time rate group. They were also observed working with higher physical exposure such as repetitive tasks, awkward static postures, awkward grips and hand movements, pulling, lifting and pushing as compared to those in the time rate wage group. The final RULA scores was also higher from the piece rate wage group (72.53% RULA score 7) which indicated higher work risks among them. The study found that the type of wage payment was significantly associated with work risks (p=0.036, df=1) and WRMSD at the shoulder, lower back, forearm, and leg (p<0.005, df=1). The musculoskeletal pain in these regions were reported more often by the piece rate wage group than the time rate wage group (At shoulder; OR = 2.94 with 95% confidence interval (CI): 1.39-6.20, at lower back OR = 3.16 with 95% CI: 1.74-5.74, at forearm OR = 2.55 with 95% CI: 1.56-4.17, at hip OR = 2.49 with 95% CI: 1.52-4.07 and at leg OR = 2.97 with 95% CI: 1.72-5.15). It can be concluded that the type of wage system could be one of the contributory factors in a high prevalence of WRMSD and high ergonomic physical work risks among sewing machine operators. It is recommended that sewing machine operators are better off being paid via a time rate wage system compared to a piece rate wage system to reduce work risks and WRMSD among them>

References

Öztürk N, Esin MN. Investigation of musculoskeletal symptoms and ergonomic risk factors among female sewing machine operators in Turkey. International Journal of Industrial Ergonomics. 2011;41:585-91.

Madeleine P. On functional motor adaptations: from the quantification of motor strategies to the prevention of musculoskeletal disorders in the neck–shoulder region. Acta Physiologica. 2010;199:1-46.

Polajnar A, Leber M, Herzog NV. Muscular-skeletal diseases require scientifically designed sewing workstations. Strojniški vestnik-Journal of Mechanical Engineering. 2010;56:31-40.

Sealetsa O, Thatcher A. Ergonomics issues among sewing machine operators in the textile manufacturing industry in Botswana. Work. 2011;38:279-89.

Kaergaard A, Andersen JH. Musculoskeletal disorders of the neck and shoulders in female sewing machine operators: prevalence, incidence, and prognosis. Occupational and Environmental Medicine. 2000;57:528-34.

Kirin S, Dragčević Z. Investigation of workplace design for the process of sewing. Magic World of Textiles: Hrvatska znanstvena bibliografija i MZOS- Svibor; 2008. p. 569-74.

Rempel DM, Wang P-C, Janowitz I, Harrison RJ, Yu F, Ritz BR. A randomized controlled trial evaluating the effects of new task chairs on shoulder and neck pain among sewing machine operators: the Los Angeles garment study. Spine. 2007;32:931-8.

Zhang F, He L, Wu S, Li J, Ye K, Wang S. Quantify work load and muscle functional activation patterns in neck-shoulder muscles of female sewing machine operators using surface electromyogram. Chinese Medical Journal. 2011;124:3731-7.

Delleman NJ, Dul J. Sewing machine operation: workstation adjustment, working posture, and workers’ perceptions. International Journal of Industrial Ergonomics. 2002;30:341-53.

Raanaas RK, Anderson D. A questionnaire survey of Norwegian taxi drivers’ musculoskeletal health, and work-related risk factors. International Journal of Industrial Ergonomics. 2008;38:280-90.

Wang PC, Harrison RJ, Yu F, Rempel DM, Ritz BR. Follow‐up of neck and shoulder pain among sewing machine operators: The Los Angeles garment study. American Journal of Industrial Medicine. 2010;53:352-60.

Karasek R, Theorell T. Healthy work: stress, productivity, and the reconstruction of working life: Basic Books; 1992.

Siegrist J. Adverse health effects of high-effort/low-reward conditions. Journal of Occupational Health Psychology. 1996;1:27.

Bongers P, Ijmker S, Van den Heuvel S, Blatter B. Epidemiology of work related neck and upper limb problems: psychosocial and personal risk factors (part I) and effective interventions from a bio behavioural perspective (part II). Journal of Occupational Rehabilitation. 2006;16:272-95.

De Lange AH, Taris TW, Kompier MA, Houtman IL, Bongers PM. The very best of the millennium: longitudinal research and the demand-control-(support) model. Journal of Occupational Health Psychology. 2003;8:282-305.

Larsman P, Hanse JJ. The impact of decision latitude, psychological load and social support at work on the development of neck, shoulder and low back symptoms among female human service organization workers. International Journal of Industrial Ergonomics. 2009;39:442-6.

Canjuga M, Läubli T, Bauer GF. Can the job demand control model explain back and neck pain? Cross-sectional study in a representative sample of Swiss working population. International Journal of Industrial Ergonomics. 2010;40:663-8.

Wang P, Ritz B, Rempel D, Harrison R, Chan J, Janowitz I. Work organization and work-related musculoskeletal disorders for sewing machine operators in garment industry. Annals of Epidemiology. 2005;15:655.

Quinlan M, Mayhew C. The effects of outsourcing on occupational health and safety: a comparative study of factory-based workers and outworkers in the Australian clothing industry. International Journal of Health Services. 1999;29:83-107.

McCurdy SA, Samuels SJ, Carroll DJ, Beaumont JJ, Morrin LA. Agricultural injury in California migrant Hispanic farm workers. American Journal of Industrial Medicine. 2003;44:225-35.

Lacey RJ, Lewis M, Sim J. Piecework, musculoskeletal pain and the impact of workplace psychosocial factors. Occupational Medicine. 2007;57:430-7.

Quinlan M, Wright L. Remuneration and safety in the Australian heavy vehicle industry: A review undertaken for the National Transport Commission. Melbourne: National Transport Commision; 2008.

Patterson PB. Attributions of danger and responses to risk among logging contractors in British Columbia’s southern interior: Implications for accident prevention in the forest industry. Research in Economic Anthropology. 2007;26:103-25.

Gravseth HM, Lund J, Wergeland E. Risk factors for accidental injuries in the construction industry. Tidsskrift for Den Norske Laegeforening: Tidsskrift for Praktisk Medicin, Ny Raekke. 2006;126:453-6.

Toupin D, LeBel L, Dubeau D, Imbeau D, Bouthillier L. Measuring the productivity and physical workload of brushcutters within the context of a production-based pay system. Forest Policy and Economics. 2007;9:1046-55.

Lilley R, Feyer A-M, Kirk P, Gander P. A survey of forest workers in New Zealand: Do hours of work, rest, and recovery play a role in accidents and injury? Journal of Safety Research. 2002;33:53-71.

Chand A. At the bottom of a global commodity chain––how different really are hourly wage rates and piece rates? Industrial Relations Journal. 2012;43:171-91.

Johansson B, Rask K, Stenberg M. Piece rates and their effects on health and safety–A literature review. Applied Ergonomics. 2010;41:607-14.

Kuorinka I, Jonsson B, Kilbom A, Vinterberg H, Biering-Sørensen F, Andersson G, et al. Standardised Nordic questionnaires for the analysis of musculoskeletal symptoms. Applied Ergonomics. 1987;18:233-7.

McAtamney L, Corlett EN. RULA: A survey method for the investigation of work-related upper limb disorders. Applied Ergonomics. 1993;24:91-9.

McAtamney L, Corlett EN. Reducing the risks of work related upper limb disorders: a guide and methods (second ed.): Institute for Occupational Ergonomics, University of Nottingham; 1996.

Zuki NM, Mohamed N. Decomposition of manufacturing processes: A review. International Journal of Automotive and Mechanical Engineering. 2012;5:545- 60.