Vol. 12 No. 2 (2018): June 2018

Article

• Application of artificial neural network for control and navigation of humanoid robot

  Asita Kumar Rath, Harish Chandra Das, Dayal R. Parhi, Priyadarshi Biplab Kumar

  3529-3538

• Multi-holes configurations of woven fabric kenaf composite plates: experimental works and 2-D modelling

  K. Supar, H. Ahmad

  3539-3547

• Analysis of production planning activities in remanufacturing system

  M. Andrew-Munot, A. Yassin, S.T. Syed Shazali, M. Sawawi, S.J. Tanjong, N. Razali

  3548-3565

• Frictional stress analysis of spur gear with misalignments

  Jason Eng, Saravanan Karuppanan, Santosh Patil

  3566-3580

• Investigation of Axial Misalignment Effects to the Gear Tooth Strength Properties Using FEM Model

  M.R. Lias, M. Awang, M.N. Talib, A.R. Senawi, M.A. Samad

  3581-3592

• Toward a dynamic analysis of bipedal robots inspired by human leg muscles

  B. Fernini, M. Temmar, M.M. Noor

  3593-3604

• The effect of portable MQL applicator onto carbide insert during turning Inconel 718

  Azreen Zainol, M.Z.A. Yazid

  3605-3613

• Viscosity of hybrid nanofluids: Measurement and comparison

  S. Sharma, A.K. Tiwari, S. Tiwari, R. Prakash

  3614-3623

• Monitoring kinetic and thermodynamic parameters of fluoride adsorption from aqueous solution by pks-based anion resins

  M.T. Bashir, A. Salmiaton, A. Idris, R. Harun

  3624-3632

• An investigation of material removal rate and kerf on WEDM through grey relational analysis

  J.M. Pujara, K.D. Kothari, A.V. Gohil

  3633-3644

• The performance of mengkuang leaf fiber reinforced low density polyethylene composites

  N.A. Halim, J.P. Siregar, D. Mathivanan, D. Bachtiar, Z. Ghazali, M.R.M Rejab, T. Tezara

  3645-3655

• Analysis of castel type biomass combustion chamber using candlenut shell fuel for patchouli oil purifying

  Eswanto, J.R. Siahaan

  3656-3670

• Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube

  Mohamed Alkateb, S.M. Sapuan, Z. Leman, Mohammad Jawaid, M.R. Ishak

  3671-3688

• Performance and emission opacity of canola and soybean biodiesel fuel in a diesel engine

  N.M. Taib, M.S. Zainuddin, M.R.A. Mansor, Z. Ilham

  3689-3699

• Tribological behavior of short-cut aramid fiber reinforced SBR elastomers: the effect of fiber orientation

  M. Khafidh, D.J. Schipper, M.A. Masen, V. Vleugels, J.W.M. Noordermeer

  3700-3711

• Effect of various inlet geometries on swirling flow in can combustor

  W. Treedet, R. Suntivarakorn

  3712-3723

• The effect of 10µm microchannel on thermo-hydraulic performance for singlephase flow in semi-circular cross-section serpentine

  S.M. Chan, K.H. Chong, Basil T. Wong

  3724-3737

• Electrical conductive polyaniline in various nanostructures for corrosion inhibition of carbon steel

  Ahmed A. Al-Dulaimi, S. Hashim, Lway Faisal Abdulrazak, M. Husham

  3738-3749

• Modeling and evaluation of a threshing drum under vertical vibration

  A. Syuhri, I. Sholahuddin, S.N.H. Syuhri, R.D.H. Qoryah

  3750-3758