STUDY ON PERFORMANCE OF 80 WATT FLOATING PHOTOVOLTAIC PANEL

Authors

  • Z. A. A. Majid Kulliyyah of Allied Health Sciences, International Islamic University of Malaysia, 25200 Kuantan, Pahang, Malaysia
  • M. H. Ruslan Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
  • K. Sopian Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
  • M.Y. Othman Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
  • M.S.M. Azmi Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia

DOI:

https://doi.org/10.15282/jmes.7.2014.14.0112

Keywords:

Floating photovoltaic; heat transfer; efficiency; performance.

Abstract

Photovoltaicpanels are used to generate electric power. The surface temperature of the photovoltaic (PV) panels will affect theirefficiency,where the increment of temperature will decreasetheir efficiency and total power gain. In this study, we will discuss the performance of an 80 W floating photovoltaic (PV) panel in a pond simulator, whereby in a two hour experiment it shows up to 15.5% increment of energy gain compared to a normal photovoltaic (PV) panel. The floating photovoltaic (FPV) panel was designed by replacing the photovoltaic panel frame with a material that has the ability to float on a water surface and is capable of transferring heat at the back of the photovoltaic surface. A heat sink is used to transfer heat at the bottom of the photovoltaic panel, which will decrease the surface temperature when placed on the water surface. The best performance of the photovoltaic panel is 1000 W/m2 fora surface temperature of 25°C; however,the efficiency will drop by 0.485% per1°C temperature increment.The system can be used on lakes, ponds or dams.

References

Omer AM. Built environment: Relating the benefits of renewable energy technologies. International Journal of Automotive and Mechanical Engineering. 2012;5:561-75.

Bazilian MD, Leenders F, van Der Ree B, Prasad D. Photovoltaic cogeneration in the built environment. Solar Energy. 2001;71:57-69.

Sharp C. 80W Polycrystalline silicon PV module. NE80E2EA2007.

Ruslan MH, Othman MYH, Sopian K, Majid ZAA, Him WA. Development of photovoltaic-thermal (PV/T) water based system. World Renewable Energy Congress (WREC X). Glasgow, Scotland2008 p. 1853-7.

Skoplaki E, Palyvos J. Operating temperature of photovoltaic modules: A survey of pertinent correlations. Renewable Energy. 2009;34:23-9.

Abdolzadeh M, Ameri M. Improving the effectiveness of a photovoltaic water pumping system by spraying water over the front of photovoltaic cells. Renewable Energy. 2009;34:91-6.

Shimbun Y. Development of a massive environmentally friendly power plant combining photovoltaic generators and windmills that will float. Green Car Congress: http://www.yomiuri.co.jp/dy/national/20080830TDY04305.htm; 2008.

Tripanagnostopoulos Y, Nousia T, Souliotis M, Yianoulis P. Hybrid photovoltaic/thermal solar systems. Solar Energy. 2002;72:217-34.

Tonui J, Tripanagnostopoulos Y. Improved PV/T solar collectors with heat extraction by forced or natural air circulation. Renewable Energy. 2007;32:623-37.

Anderson TN, Duke M, Morrison G, Carson JK. Performance of a building integrated photovoltaic/thermal (BIPVT) solar collector. Solar Energy. 2009;83:445-55.

Dubey S, Sandhu G, Tiwari G. Analytical expression for electrical efficiency of PV/T hybrid air collector. Applied Energy. 2009;86:697-705.

Majid ZAA, Ruslan MH, Othman MYH, Sopian K. Design and application of floating photovoltaic (FPV) in Malaysia. Seminar on Progress of Solar Energy Research and Development. Universiti Kebangsaan Malaysia, Bangi2008. p. 259-64.

Downloads

Published

2014-12-31

How to Cite

[1]
Z. A. A. Majid, M. H. Ruslan, K. Sopian, M.Y. Othman, and M.S.M. Azmi, “STUDY ON PERFORMANCE OF 80 WATT FLOATING PHOTOVOLTAIC PANEL”, J. Mech. Eng. Sci., vol. 7, no. 1, pp. 1150–1156, Dec. 2014.

Issue

Section

Article