Ionic liquid based PVDF/PMMA gel polymer electrolyte for lithium rechargeable battery

Authors

  • N. F. M Yusoff School of Ocean Engineering, Universiti Malaysia Terengganu, 21030 Terengganu, Malaysia
  • N. H. Idris School of Ocean Engineering, Universiti Malaysia Terengganu, 21030 Terengganu, Malaysia

DOI:

https://doi.org/10.15282/jmes.11.4.2017.18.0284

Keywords:

Polymer blend; foaming agent; ionic liquid; lithium rechargeable battery.

Abstract

The microstructure of a polymer blend as a gel polymer electrolyte affects significantly the electrochemical performances of a Lithium ion battery. Therefore, an appropriate control of the composition of the blending is crucial to obtain a porous structure. In this paper, PVDF/PMMA membrane was successfully prepared via phase-separation method by using salicylic acid as a foaming agent to produce a porous structure within the polymer blend matrix. Ionic liquid-salt mixtures of 1-ethyl-3 methyl imidazolium triflouromethanysulfonyl imide and lithium bis-triflouromethylsulfonyl imide were used to activate the PVDF/PMMA membrane. The as-prepared PVDF/PMMA membrane contains pores when observed from scanning electron microscope, which leads to the high ionic-liquid electrolyte uptake. The membrane with 10 wt% PVDF and 90 wt% PMMA exhibited a high ionic conductivity of 3.097 mS cm-1 at room temperature with high lithium ion transference number (0.7922) and wide electrochemical stability window (4.3 V). Its electrochemical performance was evaluated by LiFePO4 half-cell, suggesting that this ionic-liquid gel polymer electrolyte is possible to be developed as an electrolyte in lithium rechargeable battery.

References

Lee Y-Y, Liu Y-L. Crosslinked electrospun poly(vinylidene difluoride) fiber mat as a matrix of gel polymer electrolyte for fast-charging lithium-ion battery. Electrochimica Acta. 2017;258:1329-35.

Barchasz C, Leprêtre J-C, Patoux S, Alloin F. Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries. Electrochimica Acta. 2013;89:737-43.

Mohamed W, Atan R. Analysis of excessive heating on the thermal and electrical resistance of a polymer electrolyte membrane fuel cell. International Journal of Automotive and Mechanical Engineering. 2012;5:648-59.

Yang P, Liu L, Li L, Hou J, Xu Y, Ren X, et al. Gel polymer electrolyte based on polyvinylidenefluoride-co-hexafluoropropylene and ionic liquid for lithium ion battery. Electrochimica Acta. 2014;115:454-60.

Lu Q, Yang J, Lu W, Wang J, Nuli Y. Advanced semi-interpenetrating polymer network gel electrolyte for rechargeable lithium batteries. Electrochimica Acta. 2015;152:489-95.

Yu B, Zhou F, Wang C, Liu W. A novel gel polymer electrolyte based on poly ionic liquid 1-ethyl 3-(2-methacryloyloxy ethyl) imidazolium iodide. European polymer journal. 2007;43:2699-707.

Xu JJ, Ye H. Polymer gel electrolytes based on oligomeric polyether/cross-linked PMMA blends prepared via in situ polymerization. Electrochemistry Communications. 2005;7:829-35.

Zhang SS, Ervin MH, Xu K, Jow TR. Microporous poly(acrylonitrile-methyl methacrylate) membrane as a separator of rechargeable lithium battery. Electrochimica Acta. 2004;49:3339-45.

Shi Q, Yu M, Zhou X, Yan Y, Wan C. Structure and performance of porous polymer electrolytes based on P(VDF-HFP) for lithium ion batteries. Journal of Power Sources. 2002;103:286-92.

Zhai W, Zhu H-J, Wang L, Liu X-M, Yang H. Study of PVDF-HFP/PMMA blended micro-porous gel polymer electrolyte incorporating ionic liquid [BMIM] BF4 for Lithium ion batteries. Electrochimica Acta. 2014;133:623-30.

Liu J, Li W, Zuo X, Liu S, Li Z. Polyethylene-supported polyvinylidene fluoride–cellulose acetate butyrate blended polymer electrolyte for lithium ion battery. Journal of Power Sources. 2013;226:101-6.

Scrosati B, Selvaggi A, Croce F, Gang W. The Li/LiV3O8 polymer electrolyte lithium battery III. Investigation of the electrode interfaces. Journal of Power Sources. 1988;24:287-94.

Boudin F, Andrieu X, Jehoulet C, Olsen II. Microporous PVdF gel for lithium-ion batteries. Journal of Power Sources. 1999 81–82 804–7.

Wang H, Huang H, Wunder SL. Novel Microporous Poly(vinylidene fluoride) Blend Electrolytes for Lithium‐Ion Batteries. Journal of the Electrochemical Society. 2000;147:2853-61.

Zhao Y-H, Zhu B-K, Kong L, Xu Y-Y. Improving Hydrophilicity and Protein Resistance of Poly(vinylidene fluoride) Membranes by Blending with Amphiphilic Hyperbranched-Star Polymer. Langmuir. 2007;23:5779-86.

Morehouse JA, Lloyd DR, Freeman BD, Lawler DF, Liechti KM, Becker EB. Modeling the stretching of microporous membranes. Journal of Membrane Science. 2006;283:430-9.

Li ZH, Cheng C, Zhan XY, Wu YP, Zhou XD. A foaming process to prepare porous polymer membrane for lithium ion batteries. Electrochimica Acta. 2009;54:4403-7.

Subramania A, Kalyana Sundaram NT, Sathiya Priya AR, Vijaya Kumar G. Preparation of a novel composite micro-porous polymer electrolyte membrane for high performance Li-ion battery. Journal of Membrane Science. 2007;294:8-15.

Zhang S, Ervin M, Xu K, Jow T. Li-ion battery with poly (acrylonitrile-methyl methacrylate)-based microporous gel electrolyte. Solid State Ionics. 2005;176:41-6.

Magistris A, Mustarelli P, Quartarone E. Poly(vinylidenefluoride)-based porous polymer electrolytes. Electrochimica Acta. 2001;46:1635-9.

Michot T, Nishimoto A, Watanabe M. Electrochemical properties of polymer gel electrolytes based on poly(vinylidene fluoride) copolymer and homopolymer. Electrochimica Acta. 2000;45:1347-60.

Tarascon JM, Gozdz AS, Schmutz C, Shokoohi F, Warren PC. Performance of Bellcore's plastic rechargeable Li-ion batteries. Solid State Ionics. 1996;86–88, Part 1:49-54.

Lu J, Yan F, Texter J. Advanced applications of ionic liquids in polymer science. Progress in Polymer Science. 2009;34:431-48.

Hofmann A, Schulz M, Hanemann T. Gel electrolytes based on ionic liquids for advanced lithium polymer batteries. Electrochimica Acta. 2013;89:823-31.

Ramesh S, Uma O, Shanti R, Yi LJ, Ramesh K. Preparation and characterization of poly (ethyl methacrylate) based polymer electrolytes doped with 1-butyl-3-methylimidazolium trifluoromethanesulfonate. Measurement. 2014;48:263-73.

Appetecchi GB, Montanino M, Carewska M, Moreno M, Alessandrini F, Passerini S. Chemical–physical properties of bis(perfluoroalkylsulfonyl)imide-based ionic liquids. Electrochimica Acta. 2011;56:1300-7.

Jin Y, Zhang J, Song J, Zhang Z, Fang S, Yang L, et al. Functionalized ionic liquids based on quaternary ammonium cations with two ether groups as new electrolytes for Li/LiFePO4 secondary battery. Journal of Power Sources. 2014;254:137-47.

Raghavan P, Manuel J, Zhao X, Kim D-S, Ahn J-H, Nah C. Preparation and electrochemical characterization of gel polymer electrolyte based on electrospun polyacrylonitrile nonwoven membranes for lithium batteries. Journal of Power Sources. 2011;196:6742-9.

Rao M, Geng X, Liao Y, Hu S, Li W. Preparation and performance of gel polymer electrolyte based on electrospun polymer membrane and ionic liquid for lithium ion battery. Journal of Membrane Science. 2012;399-400:37-42.

Cheruvally G, Kim J-K, Choi J-W, Ahn J-H, Shin Y-J, Manuel J, et al. Electrospun polymer membrane activated with room temperature ionic liquid: Novel polymer electrolytes for lithium batteries. Journal of Power Sources. 2007;172:863-9.

Zhang P, Li GC, Zhang HP, Yang LC, Wu YP. Preparation of porous polymer electrolyte by a microwave assisted effervescent disintegrable reaction. Electrochemistry Communications. 2009;11:161-4.

An Y, Zuo P, Cheng X, Liao L, Yin G. Preparation and properties of ionic-liquid mixed solutions as a safety electrolyte for lithium ion batteries. International Journal of Electrochemical Science. 2011;6:2398-410.

Idris NH, Rahman MM, Wang J-Z, Liu H-K. Microporous gel polymer electrolytes for lithium rechargeable battery application. Journal of Power Sources. 2012;201:294-300.

Saito Y, Kataoka H, Quartarone E, Mustarelli P. Carrier migration mechanism of physically cross-linked polymer gel electrolytes based on PVDF membranes. The Journal of Physical Chemistry B. 2002;106:7200-4.

Cui ZY, Xu YY, Zhu LP, Wang JY, Xi ZY, Zhu BK. Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process. Journal of Membrane Science. 2008;325:957-63.

Taib NU, Idris NH. Plastic crystal–solid biopolymer electrolytes for rechargeable lithium batteries. Journal of Membrane Science. 2014;468:149-54.

Li Z, Su G, Gao D, Wang X, Li X. Effect of Al2O3 nanoparticles on the electrochemical characteristics of P(VDF-HFP)-based polymer electrolyte. Electrochimica Acta. 2004;49:4633-9.

Torimoto T, Tsuda T, Okazaki K, Kuwabata S. New frontiers in materials science opened by ionic liquids. Adv Mater. 2010;22:1196-221.

Zhang P, Zhang HP, Li GC, Li ZH, Wu YP. A novel process to prepare porous membranes comprising SnO2 nanoparticles and P(MMA-AN) as polymer electrolyte. Electrochemistry Communications. 2008;10:1052-5.

Ma W, Zhang J, Wang X, Wang S. Effect of PMMA on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate) blend prepared in semi-dilute solutions. Applied Surface Science. 2007;253:8377-88.

Zhang P, Yang LC, Li LL, Ding ML, Wu YP, Holze R. Enhanced electrochemical and mechanical properties of P(VDF-HFP)-based composite polymer electrolytes with SiO2 nanowires. Journal of Membrane Science. 2011;379:80-5.

Xiao Q, Li Z, Gao D, Zhang H. A novel sandwiched membrane as polymer electrolyte for application in lithium-ion battery. Journal of Membrane Science. 2009;326:260-4.

Jarray J, Larbi FBC, Vanhulle F, Dubault A, Halary JL. Thermal and mechanical behavior of amorphous and semi-crystalline poly(vinylidene fluoride)/poly(methyl methacrylate) blends. Macromolecular Symposia. 2003;198:103-16.

Dirlikov S, Koenig JL. Infrared Spectra of Poly(Methyl Methacrylate) Labeled With Oxygen-18. Applied Spectroscopy. 1979;33:551-5.

Schantz S, Torell LM. Evidence of dissolved ions and ion pairs in dilute poly (propylene oxide)-salt solutions. Solid State Ionics. 1993;60:47-53.

An Y, Cheng X, Zuo P, Liao L, Yin G. The effects of functional ionic liquid on properties of solid polymer electrolyte. Materials Chemistry and Physics. 2011;128:250-5.

Samsudin AS, Khairul WM, Isa MIN. Characterization on the potential of carboxy methylcellulose for application as proton conducting biopolymer electrolytes. Journal of Non-Crystalline Solids. 2012;358:1104-12.

Ma T, Cui Z, Wu Y, Qin S, Wang H, Yan F, et al. Preparation of PVDF based blend microporous membranes for lithium ion batteries by thermally induced phase separation: I. Effect of PMMA on the membrane formation process and the properties. Journal of Membrane Science. 2013;444:213-22.

Downloads

Published

2017-12-31

How to Cite

[1]
N. F. M. Yusoff and N. H. Idris, “Ionic liquid based PVDF/PMMA gel polymer electrolyte for lithium rechargeable battery”, J. Mech. Eng. Sci., vol. 11, no. 4, pp. 3152–3165, Dec. 2017.

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.