Comparative design and performance of surface water irrigation pumps for smallholder farmers in South and Southeast Asia

Witthawat  Sanghirun; Wanchai Asvapoositkul

doi:10.15282/jmes.16.3.2022.05.0714

Authors

W. Sanghirun The Joint Graduate School of Energy and Environment, King Mongkut’s University of Technology Thonburi, 10140 Bangkok, Thailand. https://orcid.org/0000-0003-4296-7554
W. Asvapoositkul Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi, 10140 Bangkok, Thailand. Phone: +6624709123; Fax: +6624709111. https://orcid.org/0000-0001-6525-1888

DOI:

https://doi.org/10.15282/jmes.16.3.2022.05.0714

Keywords:

Thai irrigation pump impeller, Cordier diagram, Specific speed, Specific diameter, Pump design variables

Abstract

An experimental study on the performance of various Thai irrigation pump impellers and a newly design conical hollow-shaped impeller was investigated. They were tested experimentally. The design pump based on a similar theory was developed. The objectives of this experiment were to provide data for comparison of Thai irrigation pump impellers, to evaluate, and to improve the current design of Thai irrigation pumps in a cost-effective and energy-efficient manner. The efficiency and design variables of Thai irrigation pump impellers were presented as a function of dimensionless specific speed in the range, 2.1 < N_s < 4.1. The geometric and design variables as functions of the specific speed and the specific diameter or Cordier diagram presented in this paper could be used as a practical design guide for Thai irrigation pump impellers. This is a preliminary design phase of Thai irrigation pump impellers and the result from this study is intended to make a modest contribution. However, they are facing new challenges that require pump performance improvement and innovative design.

References

T. Shah, R. Namara, and A. Rajan, Accelerating irrigation expansion in Sub-Saharan Africa : Policy Lessons from the Global Revolution in Farmer-Led Smallholder Irrigation. International Water Management Institute (IWMI), 2020.

D. Tavakul, "Debriddhi pump," (in Thai), Kasikorn Journal, vol. 14(2), pp. 281-283, 1941.

W. Chinsuwan and B. Cochran, "The axial-flow low-lift pump in Thailand," in Proceedings of International Conference on Small Farm Equipment for Developing Countries: Past Experiences and Future Priorities, 1986, pp. 195-203.

T. J. Krupnik, S. Santos Valle, A. J. McDonald, S. E. Justice, I. Hossain, and M. K. Gathala, Made in Bangladesh: Scale-appropriate machinery for agricultural resource conservation. International Maize and Wheat Improvement Center (CIMMYT), Mexico, 2013, pp. 66-78.

F. Molle, T. Shah, and R. Barker, "The groundswell of pumps: Multilevel impacts of a silent revolution," in ICID-asia meeting, Taiwan, Nov. 10 - 12 2003, pp. 1-18.

E. Lichtfouse, M. Navarrete, P. Debaeke, S. Véronique, and C. Alberola, Sustainable agriculture reviews Vol. 18. Springer, Netherlands, 2017.

S. Yu and J. S. Colton, "Mixed-flow irrigation pump design optimization for Bangladesh," in The 21st International Conference on Engineering Design (ICED 17) Vancouver, Canada, Aug. 21-25 2017, vol. 1, pp. 071-080.

BCC. News. "The full story of Thailand’s extraordinary cave rescue." https://www.bbc.com/news/world-asia-44791998 (accessed Dec. 8, 2021).

Wikipedia. "Tham Luang Cave Rescue." https://en.wikipedia.org/wiki/Tham_Luang_cave_rescue (accessed Dec. 8, 2021).

Ministry of Culture in Thailand, "The Tham Luang Cave Rescue: A Global Mission," Thailand, Jun. 23 - Jul. 10 2018.

MGR. News. "Thai Irrigation Pump Helping the Wild Boars Team Return to Home." (accessed Dec. 8, 2021).

Reuters. News. "Thailand Cave Rescue Lucky 13." (accessed Dec. 8, 2021).

W. Sanghirun and W. Asvapoositkul, "Impeller " (in Thai), Thailand Patent No. 72934, 2019.

W. Sanghirun and W. Asvapoositkul, "Impeller for pump " (in Thai), Thailand Patent No. 76916, 2020.

W. Sanghirun and W. Asvapoositkul, "Impeller for pump " (in Thai), Thailand Patent No. 80214, 2020.

M. Ruzicka, "On dimensionless numbers," Chemical Engineering Research and Design, vol. 86, no. 8, pp. 835-868, 2008.

D. Japikse and N. C. Baines, Introduction to turbomachinery. Oxford University Press, Oxford, United Kingdom, 1994.

S. L. Dixon and C. Hall, Fluid mechanics and thermodynamics of turbomachinery, 7th ed. Butterworth-Heinemann, 2014.

G. F. Wislicenus, Preliminary design of turbopumps and related machinery. National Aeronautics and Space Administration (NASA), California, United States, 1986.

P. Epple, F. Durst, and A. Delgado, "A theoretical derivation of the Cordier diagram for turbomachines," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 225, no. 2, pp. 354-368, 2011.

W. Sanghirun and W. Asvapoositkul, "On the flow visualization for assessment in the analysis and design of a conical hollow shaped impeller," in The 14th Asian Symposium on Visualization, Beijing, China, May 22-26 2017.

Measurement Methods of Pump Discharge, JIS B : 8302, 1990.

Rotodynamic Pumps-Hydraulic Performance Acceptance Tests - Grades 1 and 2, JIS B : 8301, 2000.

Rotodynamic pumps–Hydraulic performance acceptance tests–Grades 1, 2 and 3, ISO 9006, 2012.

Natural Resources Conservation Service, "Chapter 8 Irrigation Pumping Plants," in Part 623 Irrigation National Engineering Handbook. Department of Agriculture, United States, 2016.