Tensile fractography of artificially aged Al6061-B4C composites

Authors

  • Sathyashankara Sharma Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104
  • Achutha Kini Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104
  • Gowri Shankar Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104
  • Rakesh T. C. Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104
  • Raja H Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104
  • Krishna Chaitanya Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104
  • Manjunath Shettar Department of Mechanical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India-576104

DOI:

https://doi.org/10.15282/jmes.12.3.2018.8.0339

Keywords:

Matrix alloy, Aluminium Metal Matrix Composites, Boron carbide, aging, fractography, microstructure

Abstract

Presence of various amount of B4C reinforcement (2, 4 & 6% wt.) in Al6061 alloy on the hardness and tensile behaviour is studied in the present work. The influence of artificial aging due to presence of reinforcement on Al6061 alloy also evaluated. Brinell hardness and failure behaviour during tensile loading which impact the growth of failure physiognomies have been confirmed. The conventional age hardening treatment at three aging temperatures (100, 150 and 200°C) is performed on the composites, peak hardness and ultimate tensile strength variations at three aging temperatures is critically analysed. Lower temperature aging shows enhancement of hardness by 170% and ultimate tensile strength by 90%. The best results obtained during peak aging at 100°C is subjected to transmission electron microscope (TEM) analysis to look into the type of intermetallic responsible to strain the matrix alloy. TEM study recognises the Mg2Si phase formation during peak aging. Precipitation of this intermetallic phase and presence of harder reinforcements leads to the enhancement of hardness and nucleation of void growth failure during artificial aging treatment.

References

Hussain F, Abdullah S, Nuawi MZ. Effect of temperature on fatigue life behaviour of aluminium alloy AA6061 using analytical approach. Journal of Mechanical Engineering and Sciences. 2016 ;10(3) :2324-2235.

Nieh TG, Karlak RF. Aging characteristics of B4C-reinforced 6061-Aluminium matrix. Scripta. Matereialia.1984;18:25-28.

Salleh MNM, Ishak M, Romlay FRM, Aiman MH, A study on bead-on-plate welding of AA7075 using low power fiber laser. Journal of Mechanical Engineering and Sciences 2016 ;10(2) : 2065-2075.

Muhamad H, Hussin, Nur A, Che L. Effects of temperature on the surface and subsurface of Al-Mg-Si welded joints. Journal of Mechanical Engineering and Sciences. 2017 ;11(2) : 2743-2754.

Ozturk F. Sisman A, Toros S, Kilic S, Picu R. Influence of aging treatment on mechanical properties of 6061 aluminum alloy. Material and Design. 2012; 31:972–975.

Miao WF, Laughlin DE. Precipitation hardening in aluminum alloy 6022. Scripta-Matereialia. 1999; 40:873–878.

Rajasekaran SN, Udayashankarand K, Jagannath N. T4 and T6 Treatment of 6061 Al-15vol.% SiCp Composite. International Scholarly Research Network. 2012; 1:1-5.

Rajan TV, Sharma CP, Sharma A. Heat treatment principles and techniques. PHI, India, 2012: 118-119.

Siddiqui RA, Hussein A, Abdullah, Khamis RAB. Influence of aging parameters on the mechanical properties of 6063 aluminium alloy. Journal of Material Processing Technology. 2000; 102:234-240.

Siddiqui RA, Abdul W, Pervez T. Effect of aging time and aging temperature on fatigue and fracture behavior of 6063 aluminum alloy under seawater influence. Material and Design. 2008; 29:70–79.

Avner SH. Introduction to physical metallurgy, Second edition, Mc. Graw Hill, ISBN07-85078-1.1974;1:190-191.

Wang HQ, Sun WL, Xing YQ. Microstructure analysis on 6061 aluminum alloy after casting and diffuses annealing process, Physics Procedia-Elsevier. 2013; 2:68-75.

RamakoteswaraRao V, Ramanaiah N, Srinivasa Rao M, Sarcar MMM, Kartheek G.Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite. International Journal of Automotive and Mechanical Engineering. 2016 ;13(3):3669-3680

Fahrettin O, Esener E, Toros S, Picu CR. Effects of aging parameters on formability of 6061-O alloy. Materials and Design, 2010; 31(10):4847-4852.

Cun ZN, Gu JJ, Liu JL, Zhang D. Production of boron carbide reinforced 2024 aluminum matrix composites by mechanical alloying. Materials Transactions. 2007;48(5):990-995.

Gopal KUB, Sreenivas RKV, Vasudeva B. Effect of percentage reinforcement of B4C on the tensile property of aluminium matrix composites. International Journal of Mechanical Engineering and Robotic Research.2012;1(3):290-295.

Kulkarni K, Krishnamurthy SP, Deshmukh, MRS. Effect of particle size distribution on strength of precipitation-hardened alloys. Journal of Material Research. 2014; 19:2765-2773.

Baradeswaran. and Elaya P. Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites. Composites, Part–B. 2013;54:146–152.

Shorowordi KM, Laoui T, Haseeb JP, Celis F. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. Journal of Material Processing Technology. 2003; 142:738–743.

ASTM E8/E8M (2013). Standard Test methods for Tension Testing of Metallic Materials. ASTM International, West Conshohocken, PA.

ASTM E10 (2017), Standard Test methods for Brinell Hardness of Metallic Materials of Metallic Materials. ASTM International, West Conshohocken, PA.

Gracio JJ, Barlat F, Rauch EF, Jones PT, Neto VF, Lopes AB. Artificial aging and shear deformation behaviour of 6022 aluminium alloy. International Journal of Plasticity. 2004;20(3): 427-445.

Ibrahim MF, Ammar HR, Samuel AM, Soliman MS, Almajid A, Samuel FH. Mechanical properties and fracture of Al–15 vol.% B4C based metal matrix composites. International Journal of Cast Metals Research. 2014;27(1):7-14.

Auradi V, Rajesh GL and Kori SA. Processing of B4C particulate reinforced 6061aluminum matrix composites by melt stirring involving two-step addition. Procedia Materials Science 2014; 6:1068-1076.

Downloads

Published

2018-09-30

How to Cite

[1]
S. Sharma, “Tensile fractography of artificially aged Al6061-B4C composites”, J. Mech. Eng. Sci., vol. 12, no. 3, pp. 3866–3875, Sep. 2018.

Issue

Vol. 12 No. 3 (2018): (September 2018)

Section

Article

License

Copyright (c) 2018 The Author(s)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Similar Articles

<< < 14 15 16 17 18 19 20 21 22 > >> 

You may also start an advanced similarity search for this article.