High mixing performances of shear-thinning fluids in two-layer crossing channels micromixer at very low Reynolds numbers

A. Kouadri; Y. Lasbet; M. Makhlouf

doi:10.15282/jmes.13.4.2019.15.0471

Authors

A. Kouadri Department of Mechanical Engineering, Djillali Liabes University, 22000 Sidi Bel Abbes, Algeria
Y. Lasbet LDMM Laboratory, Djelfa University, 17000 Djelfa, Algeria, Phone : +213698968998
M. Makhlouf Department of Mechanical Engineering, Djillali Liabes University, 22000 Sidi Bel Abbes, Algeria

DOI:

https://doi.org/10.15282/jmes.13.4.2019.15.0471

Keywords:

Micromixer, Chaotic advection, Mixing index, Shear-thinning fluids, low Reynolds number

Abstract

In a recent study, the Two-Layer Crossing Channels Micromixer (TLCCM) exhibited good mixing capacities in the case of the Newtonian fluids (close to 100%) for all considered Reynolds number values. However, since the majority of the used fluids in the industrial sectors are non-Newtonians, this work details the mixing evolution of power-law fluids in the considered geometry. In this paper, the power-law index ranges from 0.73 to 1 and the generalized Reynolds number is bounded between 0.1 and 50. The conservation equations of momentum, mass and species transport are numerically solved using a CFD code, considering the species transport model. The flow structure at the cross-sectional planes of our micromixer was studied using the dynamic systems theory. The evolutions of the intensity, also the axial, radial and tangential velocity profiles were examined for different values of the Reynolds number and the power-law index. Besides, the pressure drop of the power-law fluids under different Reynolds number was calculated and represented. Furthermore, the mixing efficiency is evaluated by the computation of the mixing index (MI), based on the standard deviation of the mass fraction in different cross-sections. In such geometry, a perfect mixing is achieved with MI closed to 99.47 %, at very small Reynolds number (from the value 0.1) whatever the power-law index and generalized Reynolds numbers taken in this investigation. Consequently, the targeted channel presents a useful tool for pertinent mass transfer improvements, it is highly recommended to include it in various microfluidic systems.

References

Chafidz A, Rizal M, Faisal RM, Kaavessina M, Hartanto D, AlZahrani SM. Processing and properties of high density polyethylene/date palm fiber composites prepared by a laboratory mixing extruder. Journal of Mechanical Engineering and Sciences. 2018; 12(3): 3771-3785.

Tran M, Memon Z, Saieed A, Pao W, Hashim F, Numerical simulation of two-phase separation in T-junction with experimental validation. Journal of Mechanical Engineering and Sciences. 2018; 12(4): 4216-4230.

Ghanema A, Lemenand T, Valle DD, Peerhossaini H. Static mixers: Mechanisms, applications, and characterization methods – A review. Chemical engineering research and design, 2014; 92: 205-228.

Cai G, Xue L, Zhang H, Lin J. A Review on Micromixers. Micromachines, 2017; 8(274): 1-27.

Lee CY, Fu LM. Recent advances and applications of micromixers. Sensors and Actuators, 2018; B 259: 677-702.

Nguyen NT, Wu Z. Micromixers – a review. Journal of Micromechanics and Microengineering, 2005; 15: 1-16.

Ascanio G, Foucault S, Tanguy PA. Time-periodic mixing of shear-thinning fluids. Chemical Engineering Research and Design, 2004; 82(A9): 1199-1203.

Lee CY, Wang WT, Liu CC, Fu LM. Passive mixers in microfluidic systems: A review. Chemical Engineering Journal, 2016; 288: 146-160.

Niederkorn T, Ottino J. Chaotic mixing of shear-thinning fluids. AIChE journal, 1994; 40 (11): 1782-1793.

Anderson PD, Galaktionov OS, Peters GWM, van de Vosse FN, Meijer HEH. Mixing of non-Newtonian fluids in time-periodic cavity flows. Journal of Non-Newtonian Fluid Mechanics, 2000; 93: 265-286.

Choa CC, Chenb CL, Chena CK. Mixing enhancement of electrokinetically-driven non-Newtonian fluids in microchannel with patterned blocks. Chemical Engineering Journal, 2012; 191: 132-140.

Afzal A, Kim KY. Flow and mixing analysis of non-Newtonian fluids in straight and serpentine microchannels. Chemical Engineering Science, 2014; 116: 263-274.

Tsai RT, Wu CY, Chang CY, Kuo MY. Mixing Behaviors of Shear-Thinning Fluids in Serpentine Channel Micromixers. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2015; 9(7): 1329-1335.

Shamsoddini R, Sefid M, Fatehi R. Incompressible SPH modeling and analysis of non-Newtonian power-law fluids, mixing in a microchannel with an oscillating stirrer. Journal of Mechanical Science and Technology, 2016; 30 (1): 307-316.

Islami SB, Khezerloo M, Gharraei R. The effect of chaotic advection on mixing degree and pressure drop of non‑Newtonian fluids flow in curved micromixers. Journal of the Brazilian Society of Mechanical Sciences, 2016; 10: 1-19.

Islami SB, Khezerloo M. Enhancement of Mixing Performance of Non-Newtonian Fluids using Curving and Grooving of Microchannels. Journal of Applied Fluid Mechanics, 2017; 10 (1): 127-141.

Xia HM, Wan SYM, Shu C, Chewa YT. Chaotic micromixers using two-layer crossing channels to exhibit fast mixing at low Reynolds numbers. The Royal Society of Chemistry, 2005; 5: 748-755.

Hossain S, Kim KY. Parametric investigation on mixing in a micromixer with two-layer crossing channels. SpringerPlus, 2016;5(794): 1-16.

Hossain S, Lee I, Kim SM, Kim KY. A micromixer with two-layer serpentine crossing channels having excellent mixing performance at low Reynolds numbers. Chemical Engineering Journal, 2017; 327: 268-277.

Srisamran C, Devahastin S. Numerical simulation of flow and mixing behavior of impinging streams of shear-thinning fluids. Chemical Engineering Science, 2006; 61: 4884-4892.

Fellouah H, Castelain C, Ould-El-Moctar A, Peerhossaini H. The Dean instability in power-law and Bingham fluids in a curved rectangular duct. Journal of Non-Newtonian Fluid Mechanics, 2010; 165: 163-173.

Pinho FT, Whitelaw JH. Flow of non-Newtonian fluids in a pipe. Journal of Non-Newtonian Fluid Mechanics, 1990; 34: 129-144.

Das T, Chakraborty S. Recent trends and future challenges. Biomicrofluidics, 2009; Sadhana34(4): 573-590.

Metzner AB, Reed JC. Flow of non-Newtonian fluids: correlation of the laminar, transition, and turbulent-flow regions. American Institute of Chemical Engineers Journal, 1955; 1(4): 434-440.

Delplace F, Leuliet JC. Generalized Reynolds number for the flow of power law fluids in cylindrical ducts of arbitrary cross-section. The Chemical Engineering Journal, 1995; 56: 33-37.

Ottino JM. Mixing, Chaotic advection, and turbulence. The Annual Review of Fluid Mechanics, 1990; 22: 207-53.

Rohsenow WM, Hartnett JP, Cho YI. McGraw-Hill, Handbook of Heat Transfer, 3rd Ed. non-Newtoninan fluids, 1998, p 1-53.

Hossain S, Kim KY. Mixing analysis in a three-dimensional serpentine split-and-recombine micromixer. Chemical Engineering Research and Design, 2015; 100: 95-103.

Raza W, Hossain S, Kim KY. Effective mixing in a short serpentine split-and-recombination micromixer. Sensors and Actuators B: Chemical, 2018; 258: 381-392.

He M, Li W, Zhang M, Zhang J. Numerical investigation on the efficient mixing of overbridged split-and-recombine micromixer at low Reynolds number. Microsystem Technologies, 2019; 25(9): 3447-3461.