INTEGRATION OF THE SEIR MODEL AND IOT MALWARE MITIGATION POLICY RECOMMENDATIONS: A SENSITIVITY ANALYSIS AND NUMERICAL SIMULATION APPROACH
DOI:
https://doi.org/10.15282/ijsecs.12.2.2026.8.0154Keywords:
IoT security, SEIR model, Malware propagation, Sensitivity analysis, Basic reproduction numberAbstract
The rapid growth of Internet of Things (IoT) devices has increased the risk of malware propagation across interconnected systems, creating significant cybersecurity challenges. Although epidemic models have been widely adopted to study malware propagation, existing approaches often overlook the latent stage between device compromise and active infection and lack comprehensive validation of analytical results. This study proposes a Susceptible-Exposed-Infected-Recovered (SEIR) malware propagation model incorporating heterogeneous device vulnerability, patch deployment, and network topology to represent malware dynamics in IoT environments. The basic reproduction number (R₀) is derived analytically and validated through equilibrium analysis and fourth-order Runge Kutta simulations, yielding a baseline R₀ of 2.405. Global sensitivity analysis using Latin Hypercube Sampling (LHS, N = 3,000) and Partial Rank Correlation Coefficients (PRCC) identifies recovery rate, waning immunity, network topology, device vulnerability, transmission rate, and patch deployment rate as the key factors influencing malware prevalence. Numerical simulations demonstrate that combining faster patch deployment with network segmentation reduces malware prevalence by 94.5% after 90 days and decreases R₀ from 2.405 to 1.197. However, malware persistence remains possible because R₀ remains above the epidemic threshold. Incorporating improved device-security standards further reduces R₀ to 0.830, achieving a 99.5% reduction in malware prevalence and near-eradication of the outbreak. These findings demonstrate that sustainable IoT malware mitigation requires an integrated strategy combining effective patch management, network-level protection, and device-level security rather than relying on individual mitigation measures.
Downloads
References
[1] Statista Research Department, “Internet of Things (IoT) connected devices installed base worldwide from 2015 to 2030,” Statista, Feb. 2023. [Online]. Available: https://www.statista.com/statistics/1183457/iot-connected-devices-worldwide/ [Accessed: Oct. 28, 2026]
[2] J. Wurm, K. Hoang, O. Arias, A.-R. Sadeghi, and Y. Jin, “Security analysis on consumer and industrial IoT devices,” in Proceedings of the 21st Asia and South Pacific Design Automation Conference (ASP-DAC), 2016, pp. 519–524. https://doi.org/10.1109/ASPDAC.2016.7428064
[3] M. Antonakakis et al., “Understanding the Mirai botnet,” in Proceedings of the 26th USENIX Security Symposium, 2017, pp. 1093–1110. [Online]. Available: https://www.usenix.org/conference/usenixsecurity17/technical-sessions/presentation/antonakakis [Accessed: Oct. 28, 2026]
[4] J. Sahota and N. Vlajic, "Mozi IoT Malware and Its Botnets: From Theory To Real-World Observations," 2021 International Conference on Computational Science and Computational Intelligence (CSCI), Las Vegas, NV, USA, 2021, pp. 698-703, https://doi.org/10.1109/CSCI54926.2021.00181
[5] Cybersecurity Ventures, “Cybercrime cost estimates,” Cybersecurity Ventures, 2020. [Online]. Available: https://cybersecurityventures.com/cybercrime-damage-costs-10-trillion-by-2025/ [Accessed: Oct. 28, 2026]
[6] D. J. Daley and J. Gani, Epidemic Modeling: An Introduction. Cambridge, U.K.: Cambridge University Press, 1999. https://doi.org/10.1017/CBO9780511608834
[7] W. O. Kermack and A. G. McKendrick, “A contribution to the mathematical theory of epidemics,” Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, vol. 115, no. 772, pp. 700–721, 1927. https://doi.org/10.1098/rspa.1927.0118.
[8] J. O. Kephart and S. R. White, “Directed-graph epidemiological models of computer viruses,” in Proceedings of the IEEE Computer Society Symposium on Research in Security and Privacy, 1992, pp. 343–359. https://doi.org/10.1142/9789812812438_0004
[9] C. C. Zou, W. Gong, and D. Towsley, “Code Red worm propagation modeling and analysis,” in Proceedings of the 9th ACM Conference on Computer and Communications Security (CCS), 2002, pp. 138–147. https://doi.org/10.1145/586110.586130
[10] S. Soltan, P. Mittal, and H. V. Poor, “BlackIoT: IoT botnet of high wattage devices can disrupt the power grid,” in Proceedings of the 27th USENIX Security Symposium, 2018, pp. 15–32. [Online]. Available: https://www.usenix.org/conference/usenixsecurity18/presentation/soltan [Accessed: Oct. 28, 2026]
[11] B. K. Mishra and D. K. Saini, “SEIRS epidemic model with delay for transmission of malicious objects in computer network,” Applied Mathematics and Computation, vol. 188, no. 2, pp. 1476–1482, 2007. https://doi.org/10.1016/j.amc.2006.11.012
[12] L.-X. Yang, X. Yang, J. Liu, Q. Zhu, and C. Gan, “Epidemics of computer viruses: A complex-network approach,” Applied Mathematics and Computation, vol. 219, no. 16, pp. 8705–8717, 2013. https://doi.org/10.1016/j.amc.2013.02.031
[13] M. A. Rajab, J. Zarfoss, F. Monrose, and A. Terzis, “A multifaceted approach to understanding the botnet phenomenon,” in Proceedings of the 6th ACM SIGCOMM Conference on Internet Measurement (IMC), 2006, pp. 41–52. https://doi.org/10.1145/1177080.1177086
[14] S. Marino, I. B. Hogue, C. J. Ray, and D. E. Kirschner, “A methodology for performing global uncertainty and sensitivity analysis in systems biology,” Journal of Theoretical Biology, vol. 254, no. 1, pp. 178–196, 2008. https://doi.org/10.1016/j.jtbi.2008.04.011
[15] R. Pastor-Satorras and A. Vespignani, “Epidemic spreading in scale-free networks,” Physical Review Letters, vol. 86, no. 14, pp. 3200–3203, 2001. https://doi.org/10.1103/PhysRevLett.86.3200
[16] I. R. C. Piqueira and V. O. Araujo, “A modified epidemiological model for computer viruses,” Applied Mathematics and Computation, vol. 213, no. 2, pp. 355–360, 2009. https://doi.org/10.1016/j.amc.2009.03.023
[17] B. K. Mishra and D. K. Saini, “Dynamic model of worms with vertical transmission in computer network,” Applied Mathematics and Computation, vol. 217, no. 21, pp. 8438–8446, 2011. https://doi.org/10.1016/j.amc.2011.03.041
[18] D. Acarali, M. Rajarajan, N. Komninos, and B. B. Zarpelão, “Modelling the spread of botnet malware in IoT-based wireless sensor networks,” Security and Communication Networks, vol. 2019, Art. no. 3745619, 2019. https://doi.org/10.1155/2019/3745619
[19] X. Wang, F. Wen, S. Liu, and L. Zhang, “Analysis of clustered malware propagation and layered patch distribution in Internet of Things,” Nonlinear Dynamics, vol. 114, Art. no. 822, 2026. https://doi.org/10.1007/s11071-026-12732-0
[20] X. Zhu, J. Huang and C. Qi, “Modeling and Analysis of Malware Propagation for IoT Heterogeneous Devices,” in IEEE Systems Journal, vol. 17, no. 3, pp. 3846-3857, Sept. 2023. https://doi.org/10.1109/JSYST.2023.3269158
[21] A. Saltelli et al., Global Sensitivity Analysis: The Primer. Chichester, U.K.: John Wiley & Sons, 2008. https://doi.org/10.1002/9780470725184
[22] S. M. Blower and H. Dowlatabadi, “Sensitivity and uncertainty analysis of complex models of disease transmission: An HIV model, as an example,” International Statistical Review, vol. 62, no. 2, pp. 229–243, 1994. https://doi.org/10.2307/1403510
[23] C. H. Nwokoye, “A survey of SIR-based differential epidemic models for control and security against malware propagation in computer networks,” Security and Privacy, vol. 9, no. 1, Art. no. e70138, 2026. https://doi.org/10.1002/spy2.70138
[24] A. Javaid, Q. Niyaz, W. Sun, and M. Alam, “A Deep Learning Approach for Network Intrusion Detection System,” 9th EAI International Conference on Bio-inspired Information and Communications Technologies (formerly BIONETICS), 2016. https://dx.doi.org/10.4108/eai.3-12-2015.2262516
[25] M. M. Rahman, S. A. Shakil, and M. R. Mustakim, “A survey on intrusion detection system in IoT networks,” Cyber Security and Applications, vol. 3, Art. no. 100082, 2025. https://doi.org/10.1016/j.csa.2024.100082
[26] Y. Xin et al., “Machine learning and deep learning methods for cybersecurity,” IEEE Access, vol. 6, pp. 35365-35381, 2018. https://doi.org/10.1109/ACCESS.2018.2836950
[27] İ. Kök, F. Y. Okay, Ö. Muyanlı, and S. Özdemir, “Explainable artificial intelligence (XAI) for Internet of Things: A survey,” IEEE Internet of Things Journal, vol. 10, no. 16, pp. 14764–14779, Aug. 2023. https://doi.org/10.1109/JIOT.2023.3287678
[28] M. A. Al-Garadi, A. Mohamed, A. K. Al-Ali, X. Du, I. Ali and M. Guizani, "A Survey of Machine and Deep Learning Methods for Internet of Things (IoT) Security," in IEEE Communications Surveys & Tutorials, vol. 22, no. 3, pp. 1646-1685, thirdquarter 2020. https://doi.org/10.1109/COMST.2020.2988293
[29] N. Moustafa, B. Turnbull and K. -K. R. Choo, "An Ensemble Intrusion Detection Technique Based on Proposed Statistical Flow Features for Protecting Network Traffic of Internet of Things," in IEEE Internet of Things Journal, vol. 6, no. 3, pp. 4815-4830, June 2019. https://doi.org/10.1109/JIOT.2018.2871719
[30] P. van den Driessche and J. Watmough, “Further notes on the basic reproduction number,” in Mathematical Epidemiology, F. Brauer, P. van den Driessche, and J. Wu, Eds. Berlin, Germany: Springer, 2008, pp. 159–178. https://doi.org/10.1007/978-3-540-78911-6_6
[31] P. van den Driessche and J. Watmough, “Reproduction numbers and sub-threshold endemic equilibria for compartmental models of disease transmission,” Mathematical Biosciences, vol. 180, no. 1–2, pp. 29–48, 2002. https://doi.org/10.1016/S0025-5564(02)00108-6
[32] J. P. LaSalle, The Stability of Dynamical Systems. Philadelphia, PA, USA: Society for Industrial and Applied Mathematics, 1976. https://doi.org/10.1137/1.9781611970432
[33] N. Chitnis, J. M. Hyman, and J. M. Cushing, “Determining important parameters in the spread of malaria through the sensitivity analysis of a mathematical model,” Bulletin of Mathematical Biology, vol. 70, no. 5, pp. 1272–1296, 2008. https://doi.org/10.1007/s11538-008-9299-0
[34] M. D. McKay, R. J. Beckman, and W. J. Conover, “A comparison of three methods for selecting values of input variables in the analysis of output from a computer code,” Technometrics, vol. 21, no. 2, pp. 239–245, 1979. https://doi.org/10.1080/00401706.1979.10489755
Downloads
Published
Issue
Section
License
Copyright (c) 2026 The Author(s)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.




