# Numerical analysis of the thermal state of a cylindrical body cooled by an internal fluid flow

## Authors

• V. Yessaulkov Department of Transport Equipment and Logistics, Toraighyrov University, Academician Chokin street, 139, 140008, Pavlodar, Kazakhstan. Phone: +77182 673623; Fax: +77182 673702
• A. Mitrofanov Department of Mechanics and Oil and Gas Engineering, Toraighyrov University, Academician Chokin street, 139, 140008, Pavlodar, Kazakhstan
• K. Abishev Department of Transport Equipment and Logistics, Toraighyrov University, Academician Chokin street, 139, 140008, Pavlodar, Kazakhstan. Phone: +77182 673623; Fax: +77182 673702

## Keywords:

heat transfer, numerical model, Markov chains, transition matrix, state vector, cylindrical body, looping system

## Abstract

Mechanical engineering has its own specifics when it comes to describing the thermal state of cylinders. The heating and cooling of bodies with a cylinder surface as their heat exchange area can be considered an important technical task that requires appropriate mathematical foundation. The purpose of this work is to construct a mathematical description of the thermal state of a thermally massive cylinder cooled by a liquid passing through a coaxially located channel. The study proposed a one-dimensional mathematical model for the numerical study of the thermal state of a thermally massive cylinder cooled by a liquid passing through a coaxially arranged channel inside the body under consideration. The mesoscopic modeling scale is the basis of the mathematical model, which employs the mathematical approach of Markov chains theory. The numerical evaluation of cooling scenarios in the flow and looping mode of the cooling fluid movement is carried out. The operability of the mathematical model was investigated by performing a series of numerical experiments. The numerical experiments with the model have shown the possibility of a qualitatively consistent analysis of possible cooling scenarios and their significant differences. The qualitative reliability of the results allows us to consider the proposed model as a reliable scientific basis for describing more complex cooling systems used, for example, in transport technologies and processes.

## References

F. Gori, "Heat transfer", Encyclopedia of Energy, vol. 3, pp. 145–157, 2004.

S. D. Farahani, B. K. Majd, and A. M. Abed, "Control of thermal and fluid flow characteristics of an oscillating cylinder by porous media," Alexandria Engineering Journal, vol. 65, no. 2, pp. 951–961, 2023.

H. Li, Y. Wang, Y. Han, W. Li, L. Yang, J. Guo, et al., "A comprehensive review of heat transfer enhancement and flow characteristics in the concentric pipe heat exchanger," Powder Technology, vol. 397, p. 117037, 2022.

B. A. Souraki and, D. Mowla, "Axial and radial moisture diffusivity in cylindrical fresh green beans in a fluidized bed dryer with energy carrier: Modeling with and without shrinkage," Journal of Food Engineering, vol. 88,

no. 1, pp. 9–19, 2008.

M. A. Ali and S. N. Shehab, "Numerical analysis of heat convection through a double-pipe heat exchanger: Dimpled influence," Journal of Engineering Research, vol. 11, no. 1, p. 100016, 2023.

K. Azeez, Z. A. H. Obaid and K. M. Their, "Investigating the experimental parameters of a rib triple pipe heat exchanger," Case Studies in Thermal Engineering, vol. 44, p. 102859, 2023.

T. Tulwin, "A coupled numerical heat transfer in the transient multicycle CFD aircraft engine model," Procedia Engineering, vol. 157, pp. 255–263, 2016.

Z. Wang, Z. Huang, T. Li, S. Wang, G. Li and Z. Chen, "Heat transfer characteristics and deformation effects of compressor air-cooled cylinder based on heat-flow-solid coupling," Applied Thermal Engineering, vol. 228,

p. 120395, 2023.

A. Mamykin, P. Frick, R. Khalilov, I. Kolesnichenko, V. Pakholkov, S. Rogozhkin, et al., "Turbulent convective heat transfer in an inclined tube with liquid sodium," Magnetohydrodynamics, vol. 51, no. 2, pp. 329–336, 2015.

S. S Makarov, A. M. Lipanov and, A. I. Karpov, "Numerical investigation of heat transfer during the cooling of a metal cylinder by a flow of a gas-liquid medium in an annular channel," Journal of Engineering Physics and Thermophysics, vol. 92, no. 4, pp. 956–964, 2019.

L. N. Ovchinnikov, A.V. Mitrofanov, S. V. Vasilevich and S. V. Shpeynova, "Experimental and Computational Study of the Formation of Composite Granular Fuel," in Proceedings of CIS Higher Education Institutions and Power Engineering Associations, pp. 91–100, 2023.

N. Jurtz, H. Kruggel-Emden, O. Baran, R. Aglave, R. Cocco and M. Kraume, "Impact of contact scaling and drag calculation on the accuracy of coarse-grained discrete element method," Chemical Engineering & Technology, vol. 43, no. 10, pp. 1959–1970, 2020.

L. Scott, A. Borissova, A. Di Renzo and M. Ghadiri, "Application of coarse-graining for large scale simulation of fluid and particle motion in spiral jet mill by CFD-DEM," Powder Technology, vol. 411, p. 117962, 2022.

L. Yang, C. Han, J. Xu, B. Lu, Y. Xu, W. Wang, et al., "Role of mesoscale structure in gas–solid fluidization: Comparison between continuum and discrete approaches," Chemical Engineering Journal, vol. 454, p. 139979, 2023.

Y. Zhuang, X. Chen and D. Liu, "Stochastic bubble developing model combined with Markov process of particles for bubbling fluidized bed," Chemical Engineering Journal, vol. 291, pp. 206–214, 2016.

A. Mitrofanov, V. Mizonov, K. Tannous, L. Ovchinnikov, "A Markov chain model to describe fluidization of particles with time-varying properties," Particulate Science and Technology, vol. 36, no. 2, pp. 244–253, 2018.

S. P. Bobkov, E. Galiaskarov and I. Astrakhantseva, "The use of cellular automata systems for simulation of transfer processes in a non-uniform area," Journal of Physics: Conference Series, vol. 2001, p. 012002, 2021.

V. Shah, K. Sedighiani, J. S. Van Dokkum, C. Bos, F. Roters and M. Diehl, "Coupling crystal plasticity and cellular automaton models to study meta-dynamic recrystallization during hot rolling at high strain rates," Materials Science and Engineering: A, vol. 849, p. 143471, 2022.

V. P. Zhukov and A. N. Belyakov, "Simulation of combined heterogeneous processes based on discrete models of the Boltzmann equation," Theoretical Foundations of Chemical Engineering, vol. 51, no. 1, pp. 88–93, 2017.

H. Berthiaux, V. Mizonov and V. Zhukov, "Application of the theory of Markov chains to model different processes in particle technology," Powder Technology, vol. 157, no. 1, pp. 128–137, 2005.

M. Favretti, "The maximum entropy rate description of a thermodynamic system in a stationary non-equilibrium state," Entropy, vol. 11, no. 4, pp. 675–687, 2009.

S. J. Prowell, "Using Markov chain usage models to test complex systems", in Proceedings of the 38th Annual Hawaii International Conference on System Sciences, pp. 318c-318c, 2005.

O. Ibe, Markov Processes for Stochastic Modeling. 2nd ed. Oxford:Elsevier, Oxford, 2013.

A. Pal, S. Reuveni and S. Rahav, "Thermodynamic uncertainty relation for first-passage times on Markov chains," Physical Review Research, vol. 3, no. 3, pp. 32–34, 2021.

Y. Wu, X. Wu, "The strong law of large numbers for Markov chains in random environments," Chinese Journal of Applied Probability and Statistics, vol. 50, no. 15, pp. 3573–3585, 2011.

L. J. Galin, "On the Markov chain central limit theorem," Probability Surveys, vol. 1, pp. 299–320, 2004.

J. S. Rosenthal, "Convergence rates for Markov chains," SIAM Review, vol. 37, no. 3, pp. 387-405, 1995.

H. G. Dehling, A. C. Hoffmann and H. W. Stuut, "Stochastic models for transport in a fluidized bed," SIAM Journal on Applied Mathematics, vol. 60, no. 1, pp. 337–358, 1999.

A. Faggionato, D. Gabrielli and M. Ribezzi Crivellari, "Non-equilibrium thermodynamics of piecewise deterministic Markov processes," Journal of Statistical Physics, vol. 137, no. 2, pp. 259–304, 2009.

J. Bechhoefer, "Hidden Markov models for stochastic thermodynamics," New Journal of Physics, vol. 17, no. 7, p. 075003, 2015.

A. Khan and A. Elkamel, "Mathematical model for heat transfer mechanism for particulate system," Applied Mathematics and Computation, vol. 129, no. 2–3, pp. 295–316, 2002.

S. Maruyama and S. Moriya, "Newton's law of cooling: Follow up and exploration," International Journal of Heat and Mass Transfer, vol. 164, p. 120544, 2021.

2024-06-28

## How to Cite

[1]
V. Yessaulkov, A. Mitrofanov, and K. Abishev, “Numerical analysis of the thermal state of a cylindrical body cooled by an internal fluid flow”, J. Mech. Eng. Sci., vol. 18, no. 2, pp. 10069–10076, Jun. 2024.

Article