EFFECT OF TEMPERATURE ON HEAT TRANSFER COEFFICIENT OF TITANIUM DIOXIDE IN ETHYLENE GLYCOL-BASED NANOFLUID
DOI:
https://doi.org/10.15282/jmes.8.2015.11.0133Keywords:
heat transfer coefficient; nanofluid; titanium dioxide; ethylene glycolAbstract
Nanofluid as a coolant has potential for use in the heat transfer field because of its augmentation in thermal properties that offers advantages in heat transfer. Research on various working temperatures is still ongoing in the nanofluid field. This study focused on the effect of temperature on heat transfer behavior using titanium dioxide or TiO2 nanofluid as the working fluid in forced convection. The heat transfer coefficient was determined for flow in a circular tube under constant heat flux boundary conditions. The experiment was conducted with a Reynolds number less than 25000 with concentrations of TiO2 nanofluid at 0.5%, 1.0% and 1.5%. At 30oC, the maximum enhancement of 9.72% for 1.5% volume concentration was observed. Enhancements of 22.75% and 28.92% were found at 50oC and 70oC, respectively under similar nanofluid concentrations. The nanofluid performance was significantly influenced by working temperature. The heat transfer enhancement of TiO2 nanofluid was considerably improved at higher working temperature and high concentration because of the improvement of thermal properties.
References
Godson L, Raja B, Lal DM, Wongwises S. Enhancement of heat transfer using nanofluids—an overview. Renewable and Sustainable Energy Reviews. 2010;14:629-41.
Syam Sundar L, Sharma KV. An experimental study on heat transfer and friction factor of Al2O3 nanofluid. Journal of Mechanical Engineering and Sciences. 2011;1:99-112.
Azmi WH, Sharma KV, Mamat R, Anuar S. Nanofluid properties for forced convection heat transfer: An overview. Journal of Mechanical Engineering and Sciences. 2013;4:397-408.
Hussein AM, Sharma KV, Bakar RA, Kadirgama K. Heat transfer enhancement with nanofluids – A review. Journal of Mechanical Engineering and Sciences. 2013;4:452-61.
Choi US. Enhancing Thermal Conductivity of Fluids With Nanoparticles. In: Siginer DA, Wang HP, editors. Developments and Applications of Non-Newtonian Flows. New York: American Society of Mechanical Engineers. 1995: 99–105.
Eastman JA, Choi SUS, Li S, Thompson LJ, Lee S. Enhanced Thermal Conductivity Through The Development of Nanofluids. Proc Symposium Nanophase and Nanocomposite Materials II. Boston, MA: Materials Research Society. 1997: 3–11.
Fadhillahanafi NM, Leong KY, Risby MS. Stability and thermal conductivity characteristics of carbon nanotube based nanofluids. International Journal of Automotive and Mechanical Engineering. 2013;8:1376-84.
Hussein AM, Bakar RA, Kadirgama K, Sharma KV. Experimental measurements of nanofluids thermal properties. International Journal of Automotive and Mechanical Engineering. 2013;7:850-63.
Ravisankar B, Tara Chand V. Influence of nanoparticle volume fraction, particle size and temperature on thermal conductivity and viscosity of nanofluids- A review. International Journal of Automotive and Mechanical Engineering. 2013;8:1316-38.
Said Z, Sajid MH, Alim MA, Saidur R, Rahim NA. Experimental investigation of the thermophysical properties of AL2O3-nanofluid and its effect on a flat plate solar collector. International Communications in Heat and Mass Transfer. 2013;48:99-107.
Sundar LS, Singh MK, Sousa ACM. Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid. International Communications in Heat and Mass Transfer. 2013;49:17-24.
Javadi FS, Sadeghipour S, Saidur R, BoroumandJazi G, Rahmati B, Elias MM, et al. The effects of nanofluid on thermophysical properties and heat transfer characteristics of a plate heat exchanger. International Communications in Heat and Mass Transfer. 2013;44:58-63.
Paul G, Philip J, Raj B, Das PK, Manna I. Synthesis, characterization, and thermal property measurement of nano-Al95Zn05 dispersed nanofluid prepared by a two-step process. International Journal of Heat and Mass Transfer. 2011;54:3783-8.
Mahendran M, Lee GC, Sharma KV, Shahrani A. Performance of evacuated tube solar collector using water-based titanium oxide nanofluid. Journal of Mechanical Engineering and Sciences. 2012;3:301-10.
Rao GS, Sharma KV, Chary SP, Bakar RA, Rahman MM, Kadirgama K, et al. Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences. 2011;1:1-15.
Rahman MM, Kadirgama K, Ab Aziz AS. Artificial neural network modeling of grinding of ductile cast iron using water based SiO2 nanocoolant. International Journal of Automotive and Mechanical Engineering. 2014;9:1649-61.
Sharma KV, Sundar LS. Laminar convective heat transfer and friction factor of Al2O3 nanofluid in circular tube fitted with twisted tape inserts. International Journal of Automotive and Mechanical Engineering. 2011;3:265-78.
Hojjat M, Etemad SG, Bagheri R, Thibault J. Turbulent forced convection heat transfer of non-Newtonian nanofluids. Experimental Thermal and Fluid Science. 2011;35:1351-6.
Ding Y, Chen H, He Y, Lapkin A, Yeganeh M, Šiller L, et al. Forced convective heat transfer of nanofluids. Advanced Powder Technology. 2007;18:813-24.
Azmi WH, Sharma KV, Sarma PK, Mamat R, Anuar S. Comparison of convective heat transfer coefficient and friction factor of TiO2 nanofluid flow in a tube with twisted tape inserts. International Journal of Thermal Sciences. 2014;81:84-93.
Duangthongsuk W, Wongwises S. Heat transfer enhancement and pressure drop characteristics of TiO2–water nanofluid in a double-tube counter flow heat exchanger. International Journal of Heat and Mass Transfer. 2009;52:2059-67.
Azmi WH, Sharma KV, Sarma PK, Mamat R, Najafi G. Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube. International Communications in Heat and Mass Transfer. 2014;59:30-8.
ASHRAE Handbook - Fundamentals (SI Edition). Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.; 2009.
Abdul Hamid K, Azmi WH, Mamat R, Usri NA. Thermal conductivity enhancement of aluminium oxide nanofluid in ethylene glycol. Applied Mechanics and Materials. 2014; 660:730-4.
Anoop KB, Kabelac S, Sundararajan T, Das SK. Rheological and flow characteristics of nanofluids: Influence of electroviscous effects and particle agglomeration. Journal of Applied Physics. 2009;106: 034909.
Usri NA, Azmi WH, Mamat R, Abdul Hamid K. Viscosity of aluminium oxide (Al2O3) nanoparticle dispersed in ethylene glycol. Applied Mechanics and Materials. 2014;. 660:735-9.
Abdul Hamid K, Azmi WH, Mamat R, Usri NA. Heat transfer performance of titanium oxide in ethylene glycol based nanofluids under transition flow. Applied Mechanics and Materials. 2014; 660:684-8.
Chen H, Yang W, He Y, Ding Y, Zhang L, Tan C, et al. Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids). Powder Technology. 2008;183:63-72.
Ho CJ, Lin YJ. Turbulent forced convection effectiveness of alumina–water nanofluid in a circular tube with elevated inlet fluid temperatures: An experimental study. International Communications in Heat and Mass Transfer. 2014;57:247-53.
