Design optimization of a B-pillar for crashworthiness of vehicle side impact
DOI:
https://doi.org/10.15282/jmes.11.2.2017.11.0245Keywords:
B-pillar, design; crashworthiness; side impact; vehicle, safety.Abstract
In this study, Hypermesh and Catia V5 software were adopted for finite element analysis (FEA) of a vehicle B-pillar. The design objectives were to optimise the B-Pillar such that the maximum displacement, weight, and maximum stress value of B-Pillar is minimised without compromising its yield strength and impact resistant properties. This is significant for the improvement of a vehicle’s crashworthiness and ensuring the safety of passenger(s) during road accidents. This study initially analysed a given B-pillar design after being subjected to an even force of 140kN. The result produced von Mises stress of 1646MPa and deflection of 5.9mm. To ensure that EuroCAP directives were met, the BPillar was reinforced by adding extra steel plates to its inner surface and applying seam welding to ascertain their fusion and analysed using the same force of 140kN. Analysis of the reinforced B-Pillar design produced maximum von Mises stress of 673MPa with a maximum displacement value of 2.39mm. The optimised B-Pillar design was reinforced with 1.7kg steel plate with the overall mass of the B-Pillar amounting to 4.2kg of the total design compared to the original B-Pillar which had a total mass of 6kg. The optimised BPillar possessed less weight beside capable of resisting a force of 140kN with von Mises stress and displacement rate lower than the original B-Pillar. Thus, this indicates improvement in the tensile strength, stiffness, and impact resistant behaviour against collision forces by acting sideward on vehicles during road accidents. This can save such vehicles and passengers from severe damage that may result in loss of lives and properties. Hence, B-Pillar must be designed following the existing standards and tested before installation on vehicles to avoid unforeseen catastrophes.
References
Dakin GJ, Arbelaez RA, Nolan JM, Zuby DS, Lund AK. Insurance institute for highway safety side impact crashworthiness evaluation program: Impact configuration and rationale. 18th International Technical Conference on the Enhanced Safety of Vehicles (CD-ROM). Washington: DC: National Highway Traffic Safety Administration.; 2003.
Bodin H, Berglund D. B-pillar for a vehicle. US 8292354 B2; 2015.
SIMULIA. Prediction of b-pillar failure in automobile bodies. Retrieved from http://www.3ds.Com/fileadmin/products/simulia/pdf/tech-briefs/auto-prediction-of-b-pillar-failure-automobile-bodies-08.Pdf. 24 November, 2015.
Borst D, Crisfield R, Remmers M, Verhoosel C. Nonlinear finite element analysis of solids and structures: John Wiley & Sons; 2012.
Qiao WG, Shi WY. Simulation and optimization of b-pillar crashworthiness based on virtual test. Applied Mechanics and Materials: Trans Tech Publ; 2014. p. 505-6: 380-3.
Lilehkoohi A, Faieza A, Sahari B, Nuraini A, Halali M. Crashworthiness determination of side doors and b pillar of a vehicle subjected to pole side impact. Applied Mechanics and Materials. 2014;663:552-6.
Kamal M, Rahman MM. Finite element-based fatigue behaviour of springs in automobile suspension. International Journal of Automotive and Mechanical Engineering. 2014;10:1910-9.
Ariffin AH, Solah MS, Azhar H, Isa M, Hafzi M, Rahman MK, et al. Development of mobile deformable barrier for side impact crashworthiness evaluation in asean new car assessment programme (ASEAN NCAP). In Applied Mechanics and Materials. 2014;663:562-6.
Ahmad Z, Nagel G, Thambiratnam D. Inclusion of tapered tubes in enhancing the crash performance of automotive frontal structures. Key Engineering Materials: Trans Tech Publ; 2013. p. 1-6.
Naghipour M, Nemati M, Doostdar H. Experimental study and modeling of reinforced concrete beams strengthened by post-tensioned external reinforcing bars. International Journal of Engineering. 2010;23:127-44.
Huetter J. 2016 honda hr-v is ultra-popular -and 27 percent ultra-high-strength steel. Retrievd from http://www.Repairerdrivennews.Com/2015/06/24/2016-honda-hr-v-is-ultra-popular-and-27-percent-ultra-high-strength-steel/.
EURONCAP. Car to car side impact euro ncap - for safer car crash test safety rating. Retrieved from http://www.Euroncap.Com/content-web-page/106f41f7-d486-46bf-bfbc-80fb4c79f679/car-to-car-side-impact.Aspx.
Carney D. The new crash test that will change your next car. Retried from http://www.Popularmechanics.Com/cars/a8070/the-new-crash-test-that-will-chang-your-next-car-11980742/. 14 July, 2015.
Njuguna J. The application of energy-absorbing structures on side impact protection systems. International Journal of Computer Applications in Technology. 2011;40:280-7.
Jawi ZM, Isa MHM, Mohamed N, Awang A, Osman MR. A systemic analysis of the usage of safety items among malaysian private vehicle users. Journal of Mechanical Engineering and Sciences. 2016;10:2262-74.
Reddy S. Modeling and analysis of a composite b-pillar for side-impact protection of occupants in a sedan: Wichita State Uniersity, USA.; 2003.
Rahman N, Abdullah S, Abdullah M, Zamri W, Omar M, Sajuri Z. Energy absorption capability and deformation of laminated panels for armoured vehicle materials. International Journal of Automotive and Mechanical Engineering. 2016;13:3657-68.
Analysis FRFE. In a. N. Gent, engineering with rubber: How to design rubber components. Munich: Hanser Publishers; 2011.
Reddy JN. An introduction to the finite element method: McGraw-Hill New York; 2005.
Kamal M, Rahman MM. An integrated approach for fatigue life estimation based on continuum mechanics theory and genetic algorithm. International Journal of Automotive and Mechanical Engineering. 2015;11:2756-70.
Rahman MM, Ariffin AK, Rejab MRM, Kadirgama K, Noor MM. Multiaxial fatigue behavior of cylinder head for a free piston linear engine. Journal of Applied Sciences. 2009;9:2725-34.
Blackwell W. Retrieved from
http://www.Colorado.Edu/engineering/cas/courses.D/ifem.D/. 4 March, 2013.
Kazerouni S, Saidi A, Mohammadi M. Buckling analysis of thin functionally graded rectangulare plates with two opposite edges simply supported. International Journal of Engineering Transactions B: Applications. 2010;23:179-92.
NAFEMS. The importance of mesh convergence- Part 1 Engineering analysis and simulation-FEA, finite element analysis, CFD, computational fluid dynamics and simulation.
Retrieved from http://nafems.Org/join/resources/knowledgebase/001/.Htm. 6 September, 2015.
Frederick A, Dominic J. Strength and stiffness of engineering systems. Springer, New York Google Scholar; 2009.
Hicks TG. Handbook of Civil Engineering Calculations; 2007.
Ahmad Z, Othman M. Energy absorption performance of a rain forest vehicle under frontal impact. Journal of Mechanical Engineering and Sciences. 2014;6:807-17.
Elkady M, Elmarakbi A, MacIntyre J. Integration of vehicle dynamics control systems with an extendable bumper for collision mitigation. International Journal of Automotive and Mechanical Engineering. 2015;12:2893-913.
Budynas RG, Nisbett JK. Shigley's mechanical engineering design: McGraw-Hill New York; 2008.
Lombardi M. Body b-pillar. Retrieved from
http://www.Primapower.Com/media/uploads/editorialtext/docs/85bec587ceed831feff1e11f1f82c456.Pdf. 15 July, 2008.
Ikpe AE, Orhorhoro EK, Gobir A. Design and reinforcement of a b-pillar for occupants safety in conventional vehicle applications. International Journal of Mathematical, Engineering and Management Science. 2017;2:37-52.
Parrish A, Rais-Rohani M, Najafi A. Crashworthiness optimization of vehicle structures with magnesium alloy parts. International Journal of Crashworthiness. 2012;17:259-81.
Lilehkoohi A, Faieza A, Sahari B, Nuraini A, Halali M. Effect of material on crashworthiness for side doors and b pillar subjected to euro ncap side impact crash test. Journal of Advanced Letters. 2013;19:359-62.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 The Author(s)
This work is licensed under a Creative Commons Attribution 4.0 International License.
