INVESTIGATION OF SINGLE-PASS/DOUBLE-PASS TECHNIQUES ON FRICTION STIR WELDING OF ALUMINIUM

Authors

  • N.A.A. Sathari Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang.
  • L.H. Shah Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang.
  • A.R. Razali Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang.

DOI:

https://doi.org/10.15282/jmes.7.2014.4.0102

Keywords:

Friction stir welding; single-pass/ double-pass techniques; AA1100; microstructure; mechanical properties.

Abstract

The aim of this research is to study the effects of single-pass/ double-pass techniques on friction stir welding of aluminium. Two pieces of AA1100 with a thickness of 6.0 mm were friction stir welded using a CNC milling machine at rotational speeds of 1400 rpm, 1600 rpm and 1800 rpm respectively for single-pass and double-pass. Microstructure observations of the welded area were studied using an optical microscope. The specimens were tested by using a tensile test and Vickers hardness test to evaluate their mechanical properties. The results indicated that, at low rotational speed, defects such as ‘surface lack of fill’ and tunnels in the welded area contributed to a decrease in mechanical properties. Welded specimens using double-pass techniques show increasing values of tensile strength and hardness. From this investigation it is found that the best parameters of FSW welded aluminium AA1100 plate were those using double-pass techniques that produce mechanically sound joints with a hardness of 56.38 HV and 108 MPa strength at 1800 rpm compared to the single-pass technique

References

Godiganur V, Birabadar S. Comparison of friction stirs welding technique with conventional welding methods. International Journal of Research in Engineering and Technology. 2014; 03:572-6.

Nuraini AA, Zainal AS, Azmah Hanim MA. The effects of welding parameters on butt joints using robotic gas metal arc welding. Journal of Mechanical Engineering and Sciences. 2014;6:988-94.

Ishak M, Shah LH, Aisha ISR, Hafizi W, Islam MR. Study of resistance spot welding between aisi 301 stainless steel and AISI 1020 carbon steel dissimilar alloys. Journal of Mechanical Engineering and Sciences. 2014;6:793-806.

Charde N. Characterization of spot weld growth on dissimilar joints with different thicknesses. Journal of Mechanical Engineering and Sciences. 2012;2:172-80.

Mishra RS, Ma ZY. Friction Stir Welding and Processing. Materials Science and Engineering: R: Reports. 2005;50(1-2), 1-78.

Groover MP. Fundamentals of modern manufacturing: materials, processes, and systems. John Wiley & Sons; 2010.

Nagasawa T, Otsuka M, Yokota T, Ueki T. Structure and mechanical properties of friction stir weld joints of magnesium allov AZ31. Essential Readings in Magnesium Technology: John Wiley & Sons, Inc.; 2014;517-21.

Vural MO, A. Cam, G. Ozarpa,C. . On the friction stir welding of aluminium alloy EN AW 2024-O and EN AW 5754-H22. Archives of Materials Science and Engineering. 2007;28:49-54.

Charde N. Effects of electrode deformation of resistance spot welding on 304 austenitic stainless steel weld geometry. Journal of Mechanical Engineering and Sciences. 2012;3:261-70.

William J. Arbegast. Friction stir joining: characteristic defects. Advanced Materials Processing Center2003.

Joshi V, Balasubramaniam K, Prakash RV. Study of defects in friction stir welded AA 5083 by radiography, ultrasonic and phased array ultrasonic. Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation. 2011; 1-7.

Shah LH, Akhtar Z, Ishak M. Investigation of aluminum-stainless steel dissimilar weld quality using different filler metals. International Journal of Automotive and Mechanical Engineering. 2013;8:1121-31.

Hariri A, Azreen P N, Abdull N, Leman AM, Yusof MZM. Determination of customer requirement for welding fumes index development in automotive industries by using quality function deployment approach. International Journal of Automotive and Mechanical Engineering. 2014;9:1609-19.

Charde N. Microstructure and fatigue properties of dissimilar spot welds joints of AISI 304 and AISI 1008. International Journal of Automotive and Mechanical Engineering. 2013;7:882-99.

Rohilla P, Kumar N. Experimental investigation of tool geometry on mechanical properties of friction stir welding of AA6061. International Journal of Innovative Technology and Exploring Engineering. 2013; 3(3),56-61.

Mehra S, Dhanda P, Khanna R, Verma NSGS. Effect of tool on tensile strength in single and double sided friction stir welding. International Journal of Scientific & Engineering Research. 2012; 3(11), 1-6.

He D, Yang K, Li M, Guo H, Li N, Lai R, et al. Comparison of single and double pass friction stir welding of skin-stringer aviation aluminium alloy. Science and Technology of Welding and Joining. 2013;18:610-5.

DuPont JM, AR. Characterization of the microstructural development and corrosion resistance of friction weld on SASS alloys. Framset Research Activities Journal,Office of Naval Research. Retrived from http://www.lehigh.edu/~inemg/Framset/Research_Activities/JLP/SASS/SASS_6.htm; 2005.

Thompson B, Doherty K, Niese C, Eff M, Stotler T, Pramann Z, et al. Friction stir welding of thick section aluminum for military vehicle applications. DTIC Online Document. Access No. ADA574537. Retrived from http://oai.dtic.mil/oai/oaiverb=getRecord&metadataPrefix=html&identifier=ADA574537; 2012.

Chen C, Kovacevic R. Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding. International Journal of Machine Tools and Manufacture. 2004;44:1205-14.

Elangovan K, Balasubramanian V. Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy. Journal of Materials Processing Technology. 2008;200:163-75.

Lohwasser D, Chen Z. Friction stir welding: From basics to applications. Cambridge: Woodhead Publisher; 2010.

Li WY, Li JF, Zhang ZH, Gao DL, Chao YJ. Metal flow during friction stir welding of 7075-T651 aluminum alloy. Experimental Mechanics. 2013;53:1573-82.

Hatch JE, Association A. Aluminum: properties and physical metallurgy. USA: ASM International; 1984.

Zhang Q, Mahfouf M, Panoutsos G, Beamish K, Norris I. Multiple characterisation modelling of friction stir welding using a genetic multi-objective data-driven fuzzy modelling approach. IEEE International Conference on Fuzzy Systems. 2011;2288-95.

Hussain AK, Quadri SAP. Evaluation of parameters of friction stir welding for aluminium AA6351 alloy. International Journal of Engineering Science and Technology. 2010;2,5977-84

Downloads

Published

2014-12-31

How to Cite

[1]
N.A.A. Sathari, L.H. Shah, and A.R. Razali, “INVESTIGATION OF SINGLE-PASS/DOUBLE-PASS TECHNIQUES ON FRICTION STIR WELDING OF ALUMINIUM”, J. Mech. Eng. Sci., vol. 7, no. 1, pp. 1053–1061, Dec. 2014.

Issue

Section

Article

Similar Articles

<< < 34 35 36 37 38 39 40 41 42 43 > >> 

You may also start an advanced similarity search for this article.