A review on thermo-physical properties and heat transfer applications of single and hybrid metal oxide nanofluids

Authors

  • W. H. Azmi Faculty of Mechanical Engineering, Universiti Malaysia Pahang 26600 Pekan, Pahang, Malaysia Phone : +6094246338 ; Fax : +6094242202
  • S. N. M. Zainon Faculty of Mechanical Engineering, Universiti Malaysia Pahang 26600 Pekan, Pahang, Malaysia Phone : +6094246338 ; Fax : +6094242202
  • K. A. Hamid Faculty of Mechanical Engineering, Universiti Malaysia Pahang 26600 Pekan, Pahang, Malaysia Phone : +6094246338 ; Fax : +6094242202
  • R. Mamat Faculty of Mechanical Engineering, Universiti Malaysia Pahang 26600 Pekan, Pahang, Malaysia Phone : +6094246338 ; Fax : +6094242202

DOI:

https://doi.org/10.15282/jmes.13.2.2019.28.0425

Keywords:

nanofluids, thermal conductivity, dynamic viscosity, thermo-physical properties, heat transfer

Abstract

Nanofluids have been widely explored by various investigators for different types of nanomaterials either the single nanoparticles or hybrid types. This is due to their advantages in thermal properties as well as contribution to the enhancement in the heat transfer performance. Numerous numbers of studies were performed mostly on oxide nanofluids until today. However, the review on oxide nanofluids and their applications is limited. Hence, this paper highlights the most recent development solely on the oxide nanofluids for heat transfer applications. In addition, a comprehensive review is carried out on the recent studies of thermo‑physical properties on oxide nanofluids and their heat transfer applications. The numerical and experimental studies related to forced convection heat transfer using oxide nanofluids were presented. Most of the literatures confirmed the capability of nanofluids to improve the heat transfer performance and simultaneously insignificant increments in pressure drop. Hence, the oxide nanofluids is recommended for applications in various engineering systems.

References

Masuda H, Ebata A, Teramae K, Hishinuma N. Alteration of thermal conductivity and viscosity of liquid by dispersing ultra fine particles. Netsu Bussei. 1993;4:227–233.

Choi SUS. Enhancing thermal conductivity of fluids with nanoparticles. In: Siginer DA, Wang HP, editors. Developments and Applications of Non-Newtonian Flows. New York: American Society of Mechanical Engineers (ASME); 1995. p. 99–105.

Abdullah A, Mohamad IS, Bani Hashim AY, Abdullah N, Wei PB, Isa MHM, Zainal Abidin S. Thermal conductivity and viscosity of deionised water and ethylene glycol-based nanofluids. Journal of Mechanical Engineering and Sciences. 2016;10:2249-2261.

Sahid NSM, Rahman MM, Kadirgama K, Maleque MA. Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in water–ethylene glycol mixture. Journal of Mechanical Engineering and Sciences. 2017;11:3087-3094.

Sharma S, Tiwari AK, Tiwari S, Prakash R. Viscosity of hybrid nanofluids: Measurement and comparison. Journal of Mechanical Engineering and Sciences. 2018;12:3614-3623.

Zakaria I, Azmi WH, Mohamed WANW, Mamat R, Najafi G. Experimental Investigation of thermal conductivity and electrical conductivity of Al2O3 nanofluid in water - ethylene glycol mixture for proton exchange membrane fuel cell application. International Communications in Heat and Mass Transfer. 2015;61:61-68.

Kottasamy A, Kadirgama K, Annamalai K, Mohanesan K, Ramasamy D, Noor MM, Rahman MM, Hanipah MR. Titanium oxide with nanocoolant for heat exchanger application. Journal of Mechanical Engineering and Sciences. 2017;11:2834-2844.

Sangmesh B, Gopalakrishna K, Manjunath SH, Kathyayini N, Kadirgama K, Samykano M, Vijayakumar GC. Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences. 2018;12:3852-3865.

Lee KJ, Yoon SH, Jang J. Carbon nanofibers: A novel nanofiller for nanofluid applications. Small. 2007;3:1209–1213.

Babita, Sharma SK, Gupta SM. Preparation and evaluation of stable nanofluids for heat transfer application: A review. Experimental Thermal and Fluid Science. 2016;79:202-212.

Suganthi KS, Rajan KS. Metal oxide nanofluids: Review of formulation, thermo-physical properties, mechanisms, and heat transfer performance. Renewable and Sustainable Energy Reviews. 2017;76:226-255.

Manna I. Synthesis, characterization and application of nanofluid - An overview. Journal of the Indian Institute of Science. 2009;89:21-33.

Azmi WH, Abdul Hamid K, Mamat R, Sharma KV, Mohamad MS. Effects of working temperature on thermo-physical properties and forced convection heat transfer of TiO2 nanofluids in water – Ethylene glycol mixture. Applied Thermal Engineering. 2016;106:1190-1199.

Islam R, Shabani B, Andrews J, Rosengarten G. Experimental investigation of using ZnO nanofluids as coolants in a PEM fuel cell. International Journal of Hydrogen Energy. 2017;42:19272-19286.

Hamid KA, Azmi WH, Nabil MF, Mamat R, Sharma KV. Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids. International Journal of Heat and Mass Transfer. 2018;116:1143-1152.

Ranjbarzadeh R, Moradikazerouni A, Bakhtiari R, Asadi A, Afrand M. An experimental study on stability and thermal conductivity of water/silica nanofluid: Eco-friendly production of nanoparticles. Journal of Cleaner Production. 2019;206:1089-1100.

Nabil MF, Azmi WH, Hamid KA, Mamat R. Experimental investigation of heat transfer and friction factor of TiO2-SiO2 nanofluids in water:ethylene glycol mixture. International Journal of Heat and Mass Transfer. 2018;124:1361-1369.

Nabil MF, Azmi WH, Hamid KA, Zawawi NNM, Priyandoko G, Mamat R. Thermo-physical properties of hybrid nanofluids and hybrid nanolubricants: A comprehensive review on performance. International Communications in Heat and Mass Transfer. 2017;83:30-39.

Solangi KH, Kazi SN, Luhur MR, Badarudin A, Amiri A, Sadri R, Zubir MNM, Gharehkhani S, Teng KH. A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids. Energy. 2015;89:1065-1086.

Abdolbaqi MK, Azmi WH, Mamat R, Sharma KV, Najafi G. Experimental investigation of thermal conductivity and electrical conductivity of BioGlycol–water mixture based Al2O3 nanofluid. Applied Thermal Engineering. 2016;102:932-941.

Chiam HW, Azmi WH, Usri NA, Mamat R, Adam NM. Thermal conductivity and viscosity of Al2O3 nanofluids for different based ratio of water and ethylene glycol mixture. Experimental Thermal and Fluid Science. 2017;81:420-429.

Zawawi NNM, Azmi WH, Sharif MZ, Najafi G. Experimental investigation on stability and thermo-physical properties of Al2O3–SiO2 /PAG nanolubricants with different nanoparticle ratios. Journal of Thermal Analysis and Calorimetry. 2019;135:1243-1255.

Ramadhan AI, Azmi WH, Mamat R, Hamid KA, Norsakinah S. Investigation on stability of tri-hybrid nanofluids in water-ethylene glycol mixture. IOP Conference Series: Materials Science and Engineering. 1 ed2019. p. 012068.

Sharif MZ, Azmi WH, Redhwan AAM, Mamat R. Investigation of thermal conductivity and viscosity of Al2O3/PAG nanolubricant for application in automotive air conditioning system. International Journal of Refrigeration. 2016;70:93-102.

Sundar LS, Sharma KV, Singh MK, Sousa ACM. Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor – A review. Renewable and Sustainable Energy Reviews. 2017;68, Part 1:185-198.

Hamid KA, Azmi WH, Mamat R, Usri NA, Najafi G. Effect of temperature on heat transfer coefficient of titanium dioxide in ethylene glycol-based nanofluid. Journal of Mechanical Engineering and Sciences. 2015;8:1367-1375.

Hamid KA, Azmi WH, Mamat R, Sharma KV. Experimental investigation on heat transfer performance of TiO2 nanofluids in water–ethylene glycol mixture. International Communications in Heat and Mass Transfer. 2016;73:16-24.

Usri NA, Azmi WH, Mamat R, Hamid KA. Forced convection heat transfer using water-ethylene glycol (60:40) based nanofluids in automotive cooling system. International Journal of Automotive and Mechanical Engineering. 2015;11:2747.

Hamid KA, Azmi WH, Nabil MF, Mamat R. Improved thermal conductivity of TiO2-SiO2 hybrid nanofluid in ethylene glycol and water mixture. IOP Conference Series: Materials Science and Engineering. 1 ed2017. p. 1-7.

Nabil MF, Azmi WH, Abdul Hamid K, Mamat R, Hagos FY. An experimental study on the thermal conductivity and dynamic viscosity of TiO2-SiO2 nanofluids in water: Ethylene glycol mixture. International Communications in Heat and Mass Transfer. 2017;86:181-189.

Hamid KA, Azmi WH, Nabil MF, Mamat R. Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 nanofluids heat transfer performance under turbulent flow. International Journal of Heat and Mass Transfer. 2018;118:617-627.

Hemmat Esfe M, Karimipour A, Yan WM, Akbari M, Safaei MR, Dahari M. Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles. International Journal of Heat and Mass Transfer. 2015;88:728-734.

Sonawane SS, Khedkar RS, Wasewar KL. Effect of sonication time on enhancement of effective thermal conductivity of nano TiO2–water, ethylene glycol, and paraffin oil nanofluids and models comparisons. Journal of Experimental Nanoscience. 2015;10:310-322.

Guo Y, Zhang T, Zhang D, Wang Q. Experimental investigation of thermal and electrical conductivity of silicon oxide nanofluids in ethylene glycol/water mixture. International Journal of Heat and Mass Transfer. 2018;117:280-286.

Agarwal R, Verma K, Agrawal NK, Duchaniya RK, Singh R. Synthesis, characterization, thermal conductivity and sensitivity of CuO nanofluids. Applied Thermal Engineering. 2016;102:1024-1036.

Nemade K, Waghuley S. A novel approach for enhancement of thermal conductivity of CuO/H2O based nanofluids. Applied Thermal Engineering. 2016;95:271-274.

Ho CJ, Huang JB, Tsai PS, Yang YM. Preparation and properties of hybrid water-based suspension of Al2O3 nanoparticles and MEPCM particles as functional forced convection fluid. International Communications in Heat and Mass Transfer. 2010;37:490-494.

Suresh S, Venkitaraj KP, Selvakumar P, Chandrasekar M. Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical properties. Colloids Surfaces A. 2011;388:41-48.

Charab AA, Movahedirad S, Norouzbeigi R. Thermal conductivity of Al2O3+TiO2/water nanofluid: Model development and experimental validation. Applied Thermal Engineering. 2017;119:42-51.

Nine MJ, Batmunkh M, Kim JH, Chung HS, Jeong HM. Investigation of Al2O3-MWCNTs hybrid dispersion in water and their thermal characterization. Journal of Nanoscience and Nanotechnology. 2012;12:4553-4559.

Toghraie D, Chaharsoghi VA, Afrand M. Measurement of thermal conductivity of ZnO–TiO2/EG hybrid nanofluid. Journal of Thermal Analysis and Calorimetry. 2016;125:527-535.

Megatif L, Ghozatloo A, Arimi A, Shariati Niasar M. Investigation of laminar convective heat transfer of a novel TiO2–carbon nanotube hybrid water-based nanofluid. Experimental Heat Transfer. 2016;29:124-138.

Batmunkh M, Tanshen MR, Nine MJ, Myekhlai M, Choi H, Chung H, Jeong H. Thermal conductivity of TiO2 nanoparticles based aqueous nanofluids with an addition of a modified silver particle. Industrial and Engineering Chemistry Research. 2014;53:8445-8451.

Madhesh D, Parameshwaran R, Kalaiselvam S. Experimental investigation on convective heat transfer and rheological characteristics of Cu–TiO2 hybrid nanofluids. Experimental Thermal and Fluid Science. 2014;52:104-115.

Baghbanzadeh M, Rashidi A, Rashtchian D, Lotfi R, Amrollahi A. Synthesis of spherical silica/multiwall carbon nanotubes hybrid nanostructures and investigation of thermal conductivity of related nanofluids. Thermochimica Acta. 2012;549:87-94.

Baby TT, Sundara R. Synthesis and transport properties of metal oxide decorated graphene dispersed nanofluids. The Journal of Physical Chemistry C. 2011;115:8527-8533.

Nine MJ, Munkhbayar B, Rahman MS, Chung H, Jeong H. Highly productive synthesis process of well dispersed Cu2O and Cu/Cu2O nanoparticles and its thermal characterization. Materials Chemistry and Physics. 2013;141:636-642.

Hamid KA, Azmi WH, Mamat R, Usri NA, Najafi G. Investigation of Al2O3 nanofluid viscosity for different water/EG mixture based. Energy Procedia. 2015;79:354-359.

Anoop K, Sadr R, Yrac R, Amani M. High-pressure rheology of alumina-silicone oil nanofluids. Powder Technology. 2016;301:1025-1031.

Abdolbaqi MK, Sidik NAC, Aziz A, Mamat R, Azmi WH, Yazid MNAWM, Najafi G. An experimental determination of thermal conductivity and viscosity of BioGlycol/water based TiO2 nanofluids. International Communications in Heat and Mass Transfer. 2016;77:22-32.

Khedkar RS, Shrivastava N, Sonawane SS, Wasewar KL. Experimental investigations and theoretical determination of thermal conductivity and viscosity of TiO2–ethylene glycol nanofluid. International Communications in Heat and Mass Transfer. 2016;73:54-61.

Żyła G, Fal J. Viscosity, thermal and electrical conductivity of silicon dioxide–ethylene glycol transparent nanofluids: An experimental studies. Thermochimica Acta. 2017;650:106-113.

Ghasemi S, Karimipour A. Experimental investigation of the effects of temperature and mass fraction on the dynamic viscosity of CuO-paraffin nanofluid. Applied Thermal Engineering. 2018;128:189-197.

Akhavan Behabadi MA, Shahidi M, Aligoodarz MR. An experimental study on heat transfer and pressure drop of MWCNT–water nano-fluid inside horizontal coiled wire inserted tube. International Communications in Heat and Mass Transfer. 2015;63:62-72.

Asadi M, Asadi A. Dynamic viscosity of MWCNT/ZnO–engine oil hybrid nanofluid: An experimental investigation and new correlation in different temperatures and solid concentrations. International Communications in Heat and Mass Transfer. 2016;76:41-45.

Soltani O, Akbari M. Effects of temperature and particles concentration on the dynamic viscosity of MgO-MWCNT/ethylene glycol hybrid nanofluid: Experimental study. Physica E: Low-dimensional Systems and Nanostructures. 2016;84:564-570.

Akilu S, Baheta AT, Sharma KV. Experimental measurements of thermal conductivity and viscosity of ethylene glycol-based hybrid nanofluid with TiO2-CuO/C inclusions. Journal of Molecular Liquids. 2017;246:396-405.

Shahsavar A, Bahiraei M. Experimental investigation and modeling of thermal conductivity and viscosity for non-Newtonian hybrid nanofluid containing coated CNT/Fe3O4 nanoparticles. Powder Technology. 2017;318:441-450.

Chandrasekar M, Suresh S, Senthilkumar T. Mechanisms proposed through experimental investigations on thermophysical properties and forced convective heat transfer characteristics of various nanofluids – A review. Renewable and Sustainable Energy Reviews. 2012;16:3917-3938.

Sommers AD, Yerkes KL. Experimental investigation into the convective heat transfer and system-level effects of Al2O3-propanol nanofluid. Journal of Nanoparticle Research. 2010;12:1003-1014.

Ho CJ, Liu WK, Chang YS, Lin CC. Natural convection heat transfer of alumina-water nanofluid in vertical square enclosures: An experimental study. International Journal of Thermal Sciences. 2010;49:1345-1353.

Heyhat MM, Kowsary F, Rashidi AM, Alem Varzane Esfehani S, Amrollahi A. Experimental investigation of turbulent flow and convective heat transfer characteristics of alumina water nanofluids in fully developed flow regime. International Communications in Heat and Mass Transfer. 2012;39:1272-1278.

Nabati Shoghl S, Jamali J, Keshavarz Moraveji M. Electrical conductivity, viscosity, and density of different nanofluids: An experimental study. Experimental Thermal and Fluid Science. 2016;74:339-346.

Akilu S, Sharma KV, Baheta AT, Mamat R. A review of thermophysical properties of water based composite nanofluids. Renewable and Sustainable Energy Reviews. 2016;66:654-678.

Zhou SQ, Ni R. Measurement of the specific heat capacity of water-based Al2O3 nanofluid. Applied Physics Letters. 2008;92:093123.

O'Hanley H, Buongiorno J, McKrell T, Hu L-w. Measurement and model validation of nanofluid specific heat capacity with differential scanning calorimetry. Advances in Mechanical Engineering. 2012;4:181079.

Barbés B, Páramo R, Blanco E, Pastoriza Gallego MJ, Piñeiro MM, Legido JL, Casanova C. Thermal conductivity and specific heat capacity measurements of Al2O3 nanofluids. Journal of Thermal Analysis and Calorimetry. 2013;111:1615-1625.

Nuim Labib M, Nine MJ, Afrianto H, Chung H, Jeong H. Numerical investigation on effect of base fluids and hybrid nanofluid in forced convective heat transfer. International Journal of Thermal Sciences. 2013;71:163-171.

Sekhar YR, Sharma KV. Study of viscosity and specific heat capacity characteristics of water-based Al2O3 nanofluids at low particle concentrations. Journal of Experimental Nanoscience. 2015;10:86-102.

Yiamsawasd T, Dalkilic AS, Wongwises S. Measurement of specific heat of nanofluids. Current Nanoscience. 2012;8:939-944.

Vajjha RS, Das DK. Specific heat measurement of three nanofluids and development of new correlations. Journal of Heat Transfer. 2009;131:071601-071601-7.

Dawood HK, Mohammed HA, Che Sidik NA, Munisamy KM, Wahid MA. Forced, natural and mixed-convection heat transfer and fluid flow in annulus: A review. International Communications in Heat and Mass Transfer. 2015;62:45-57.

Hatami N, Kazemnejad Banari A, Malekzadeh A, Pouranfard AR. The effect of magnetic field on nanofluids heat transfer through a uniformly heated horizontal tube. Physics Letters A. 2017;381:510-515.

Azari A, Derakhshandeh M. An experimental comparison of convective heat transfer and friction factor of Al2O3 nanofluids in a tube with and without butterfly tube inserts. Journal of the Taiwan Institute of Chemical Engineers. 2015;52:31-39.

Mwesigye A, Huan Z. Thermodynamic analysis and optimization of fully developed turbulent forced convection in a circular tube with water–Al2O3 nanofluid. International Journal of Heat and Mass Transfer. 2015;89:694-706.

Andreozzi A, Manca O, Nardini S, Ricci D. Forced convection enhancement in channels with transversal ribs and nanofluids. Applied Thermal Engineering. 2016;98:1044-1053.

Yang C, Peng K, Nakayama A, Qiu T. Forced convective transport of alumina–water nanofluid in micro-channels subject to constant heat flux. Chemical Engineering Science. 2016;152:311-322.

Ho CJ, Chang CY, Yan WM. An experimental study of forced convection effectiveness of Al2O3-water nanofluid flowing in circular tubes. International Communications in Heat and Mass Transfer. 2017;83:23-29.

Azmi WH, Usri NA, Mamat R, Sharma KV, Noor MM. Force convection heat transfer of Al2O3 nanofluids for different based ratio of water:ethylene glycol mixture. Applied Thermal Engineering. 2017;112:707-719.

Khdher AM, Sidik NAC, Hamzah WAW, Mamat R. An experimental determination of thermal conductivity and electrical conductivity of bio glycol based Al2O3 nanofluids and development of new correlation. International Communications in Heat and Mass Transfer. 2016;73:75-83.

Mahmoudi M, Tavakoli MR, Mirsoleimani MA, Gholami A, Salimpour MR. Experimental and numerical investigation on forced convection heat transfer and pressure drop in helically coiled pipes using TiO2/water nanofluid. International Journal of Refrigeration. 2017;74:627-643.

Qi C, Wan YL, Li CY, Han DT, Rao ZH. Experimental and numerical research on the flow and heat transfer characteristics of TiO2-water nanofluids in a corrugated tube. International Journal of Heat and Mass Transfer. 2017;115:1072-1084.

Azmi WH, Sharma KV, Sarma PK, Mamat R, Najafi G. Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube. International Communications in Heat and Mass Transfer. 2014;59:30-38.

Hekmatipour F, Akhavan Behabadi MA, Sajadi B. Combined free and forced convection heat transfer of the copper oxide-heat transfer oil (CuO-HTO) nanofluid inside horizontal tubes under constant wall temperature. Applied Thermal Engineering. 2016;100:621-627.

Sheikholeslami M, Bhatti MM. Forced convection of nanofluid in presence of constant magnetic field considering shape effects of nanoparticles. International Journal of Heat and Mass Transfer. 2017;111:1039-1049.

Ranjbarzadeh R, Meghdadi Isfahani AH, Afrand M, Karimipour A, Hojaji M. An experimental study on heat transfer and pressure drop of water/graphene oxide nanofluid in a copper tube under air cross-flow: Applicable as a heat exchanger. Applied Thermal Engineering. 2017;125:69-79.

Zainal Abidin S, Mohamad IS, Bani Hashim AY, Abdullah N, Hafiz MIM, Masripan NAB, Abdullah A. Investigation of thermal characteristics of CNF-based nanofluids for electronic cooling applications. Journal of Mechanical Engineering and Sciences. 2016;10:2336-2349.

Minakov AV, Guzei DV, Meshkov KN, Popov IA, Shchelchkov AV. Experimental study of turbulent forced convection of nanofluid in channels with cylindrical and spherical hollows. International Journal of Heat and Mass Transfer. 2017;115:915-925.

Sheikholeslami M, Vajravelu K, Rashidi MM. Forced convection heat transfer in a semi annulus under the influence of a variable magnetic field. International Journal of Heat and Mass Transfer. 2016;92:339-348.

Downloads

Published

2019-06-28

How to Cite

[1]
W. H. Azmi, S. N. M. Zainon, K. A. Hamid, and R. Mamat, “A review on thermo-physical properties and heat transfer applications of single and hybrid metal oxide nanofluids”, J. Mech. Eng. Sci., vol. 13, no. 2, pp. 5182–5211, Jun. 2019.

Similar Articles

<< < 12 13 14 15 16 17 18 19 20 21 > >> 

You may also start an advanced similarity search for this article.