A review on thermo-physical properties of bio, non-bio and hybrid nanofluids
DOI:
https://doi.org/10.15282/jmes.13.4.2019.12.0468Keywords:
Nanofluids, bio-nanoparticles, pressure drop, heat transferAbstract
The pressure drop and thermal performance of various nanofluids can be affected by their thermo-physical properties. However, there are many different parameters that need to be considered when determining the thermo-physical properties of nanofluids. This paper highlights a detail reviews on the thermo-physical properties of nanofluids with different material type and effect of some process parameters (such as material type, temperature and concentration) on the thermo-physical properties of nanofluids. Four thermo-physical properties mainly density, viscosity, thermal conductivity and specific heat capacity from different literatures were summarized, discussed and presented. The lowest viscosity value of nanofluids in literature was mango bark water-based nanofluid (0.81cP). On the other hand, the maximum thermal conductivity value of nanofluids in the literature was GNP-Ag water-based nanofluid (0.69W/mK). The density and specific heat capacity are strongly dependent on the material type. Meanwhile, the viscosity and thermal conductivity are greatly affected by temperature and concentration. The most influential parameters on thermo-physical properties of nanofluids are material type followed by temperature. Most of the literatures confirmed bio nanofluids have low viscosity value and hybrid have high thermal conductivity values.
References
Ahmadi M, Elmongy H, Madrakian T, Abdel-Rehim M. Nanomaterials as sorbents for sample preparation in bioanalysis: A review. Analytica Chimica Acta. 2017; 958:1–21.
Izadi S, Armaghani T, Ghasemiasl R, Chamkha AJ, Molana M. A comprehensive review on mixed convection of nanofluids in various shapes of enclosures. Powder Technology. 2019; 343:880–907.
Azmi WH, Zainon SNM, Hamid KA, Mamat R. A review on thermo-physical properties and heat transfer applications of single and hybrid metal oxide nanofluids. Journal of Mechanical Engineering and Sciences. 2019; 13:5182–5211.
Eastman JA, Choi US, Li S, Thompson LJ, Lee S. Enhanced thermal conductivity through the development of nanofluids. Materials Research Society Symposium - Proceedings. 1997; 457:3–11.
Ramezanizadeh M, Alhuyi Nazari M, Ahmadi MH, Açıkkalp E. Application of nanofluids in thermosyphons: A review. Journal of Molecular Liquids. 2018; 272:395–402.
Bahiraei M, Heshmatian S. Electronics cooling with nanofluids: A critical review. Energy Conversion and Management. 2018; 172:438–456.
Chamkha AJ, Molana M, Rahnama A, Ghadami F. On the nanofluids applications in microchannels: A comprehensive review. Powder Technology. 2018; 332:287–322.
Molana M. On the Nanofluids Application in the Automotive Radiator to Reach the Enhanced Thermal Performance: A Review. American Journal of Heat and Mass Transfer. 2017; 4:168–187.
Sangmesh B, Gopalakrishna K, Manjunath SH, Kathyayini N, Kadirgama K, Samykano M, Vijayakumar GC. Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences. 2018; 12:3852–3865.
Kumar R, Ha SK, Verma K, Tiwari SK. Recent progress in selected bio-nanomaterials and their engineering applications: An overview. Journal of Science: Advanced Materials and Devices. 2018; 3:263–288.
Li Y, Zhou J, Tung S, Schneider E, Xi S. A review on development of nanofluid preparation and characterization. Powder Technology. 2009; 196:89–101.
Sundar LS, Sharma KV, Singh MK, Sousa ACM. Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor – A review. Renewable and Sustainable Energy Reviews. 2017; 68:185–198.
Huminic G, Huminic A. Heat transfer and flow characteristics of conventional fluids and nanofluids in curved tubes: A review. Renewable and Sustainable Energy Reviews. 2016; 58:1327–1347.
Wong KV, De Leon O. Applications of Nanofluids : Current and Future Applications of Nanofluids : Current and Future. 2014.
Yang L, Xu J, Du K, Zhang X. Recent developments on viscosity and thermal conductivity of nanofluids. Powder Technology. 2017; 317:348–369.
Sharifpur M, Solomon AB, Meyer JP, Ibrahim JS, Immanuel B. Thermal Conductivity and Viscosity of Mango Bark / Water Nanofluids. In: 13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Portorož, Slovenia; 17-19 July, 2017.
Awua JT, Ibrahim JS, Kwaghger A, Sharifpur M, Meyer JP. Investigation into thermal conductivity of palm kernel fibre nanofluids with mixture of ethylene glycol/water as base fluid. In: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malaga, Spain, pp. 1719–1725; 2016.
Ahmed S, Annu, Ikram S, Yudha S. Biosynthesis of gold nanoparticles: A green approach. Journal of Photochemistry and Photobiology B: Biology. 2016; 161:141–153.
Ahmed S, Ahmad M, Swami BL, Ikram S. A review on plants extract mediated synthesis of silver nanoparticles for antimicrobial applications: A green expertise. Journal of Advanced Research. 2016; 7:17–28.
Iravani S. Methods for Preparation of Metal Nanoparticles. In: Thota S, Crans DC, editors. Metal Nanoparticles: Synthesis and Applications in Pharmaceutical Sciences, Germany: Wiley‐VCH Verlag GmbH & Co. KGaA, 2018, p 15-24.
Devendiran DK, Amirtham VA. A review on preparation, characterization, properties and applications of nanofluids. Renewable and Sustainable Energy Reviews. 2016; 60:21–40.
Khan I, Saeed K, Khan I. Nanoparticles: Properties, applications and toxicities. Arabian Journal of Chemistry. 2017.
Dhinesh Kumar D, Valan Arasu A. A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids. Renewable and Sustainable Energy Reviews. 2018; 81:1669–1689.
Mukherjee S. Preparation and Stability of Nanofluids-A Review. IOSR Journal of Mechanical and Civil Engineering. 2013; 9: 63–69.
Mahbubul IM. Preparation of Nanofluid. 2019.
Babita, Sharma SK, Gupta SM. Preparation and evaluation of stable nanofluids for heat transfer application: A review. Experimental Thermal and Fluid Science. 2016; 79:202–212.
Azmi WH, Sharma KV, Mamat R, Najafi G, Mohamad MS. The enhancement of effective thermal conductivity and effective dynamic viscosity of nanofluids - A review. Renewable and Sustainable Energy Reviews. 2016; 53:1046–1058.
Nabil MF, Azmi WH, Hamid KA, Zawawi NNM, G. Priyandoko G, Mamat R. Thermo-physical properties of hybrid nanofluids and hybrid nanolubricants: A comprehensive review on performance. International Communications in Heat and Mass Transfer. 2017; 83:30–39.
Gupta M, Singh V, Kumar S, Kumar Dilbaghi SN, Said Z. Up to date review on the synthesis and thermophysical properties of hybrid nanofluids. Journal of Cleaner Production. 2018;190:169–192.
Angayarkanni SA, Philip J. Review on thermal properties of nanofluids: Recent developments. Advances in Colloid and Interface Science. 2015; 225:146–176.
Sajid MU, Ali HM. Thermal conductivity of hybrid nanofluids: A critical review. International Journal of Heat and Mass Transfer. 2018; 126:211–234.
Hwang Y, Lee JK, Lee CH, Jung YM, Cheong SI, Lee CG, Ku BC, Jang SP. Stability and thermal conductivity characteristics of nanofluids. Thermochim. Acta 2007; 455:70–74.
Haddad Z, Abid C, Oztop HF, Mataoui A. A review on how the researchers prepare their nanofluids. International Journal of Thermal Sciences. 2014; 76: 168–189.
Suganthi KS, Rajan KS. Metal oxide nanofluids: Review of formulation, thermo-physical properties, mechanisms, and heat transfer performance. Renewable and Sustainable Energy Reviews. 2017; 76:226–255.
Che Sidik NA, Mahmud Jamil M, Aziz Japar WMA, Muhammad Adamu I. A review on preparation methods, stability and applications of hybrid nanofluids. Renewable and Sustainable Energy Reviews. 2017; 80:1112–1122.
Chilingar GV, Haroun M. Introduction to Electrokinetics. 2014.
Mehrali M, Sadeghinezhad E, Latibari ST, Kazi SN, Mehrali M, Zubir MMNBM, Metselaar HSC. Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets. Nanoscale Research Letters. 2014; 157:2225–2239.
Mitra I, Manna N, Manna JS, Mitra MK. Synthesis of Chlorophyll Entrapped Red Luminescent Silica Nanoparticles for Bioimaging Application. Procedia Materials Science. 2014; 6:770–774.
Shao X, Chen Y, Mo S, Cheng Z, Yin T. Dispersion Stability of TiO2-H2O Nanofluids Containing Mixed Nanotubes and Nanosheets. Energy Procedia. 2015; 75:2049–2054.
Singh AK, Raykar VS. Microwave synthesis of silver nanofluids with polyvinylpyrrolidone (PVP) and their transport properties. Colloid and Polymer Science. 2008; 286:1667–1673.
Li D, Kaner RB. Processable stabilizer-free polyaniline nanofiber aqueous colloids. Chemical Communications. 2005;0:3286–3288.
Hamid KA, Azmi WH, Nabil MF, Mamat R, Sharma KV. Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2nanofluids. International Journal of Heat and Mass Transfer. 2018; 116:1143–1152.
Fuskele V, Sarviya RM . Recent developments in Nanoparticles Synthesis, Preparation and Stability of Nanofluids. Materials Today: Proceedings. 2017; 4:4049–4060.
Yang D, Sun B, Li H, Fan X. Experimental study on the heat transfer and flow characteristics of nanorefrigerants inside a corrugated tube. International Journal of Refrigeration. 2015; 56:213–223.
Li X, Zou C, Lei X, Li W. Stability and enhanced thermal conductivity of ethylene glycol-based SiC nanofluids. International Journal of Heat and Mass Transfer. 2015;89:613–619.
Khaleduzzaman SS, Sohel MR, Saidur R, Selvaraj J. Stability of Al2O3-water nanofluid for electronics cooling system. Procedia Engineering. 2015; 105:406–411.
Kim HJ, Lee SH, Lee JH, Jang SP. Effect of particle shape on suspension stability and thermal conductivities of water-based bohemite alumina nanofluids. Energy. 2015; 90:1290–1297.
Mahbubul IM, Shahrul IM, Khaleduzzaman SS, Saidur R, Amalina MA, Turgut A. Experimental investigation on effect of ultrasonication duration on colloidal dispersion and thermophysical properties of alumina-water nanofluid. International Journal of Heat and Mass Transfer. 2015; 88:73–81.
Sadeghi R, Etemad SG, Keshavarzi E, Haghshenasfard M. Investigation of alumina nanofluid stability by UV–vis spectrum. Microfluidics and Nanofluidics. 2015; 18:1023–1030.
Mahbubul IM, Elcioglu EB, Saidur R, Amalina MA. Optimization of ultrasonication period for better dispersion and stability of TiO2–water nanofluid. Ultrasonics Sonochemistry. 2017; 37:360–367.
Guardia P, Batlle-Brugal B, Roca AG, Iglesas O, Morales MP, Serna CJ, Labarta A, Batlle X. Surfactant effects in magnetite nanoparticles of controlled size. Journal of Magnetism and Magnetic Materials. 2007; 316:756–759.
Kamatchi R, Venkatachalapathy S. Parametric study of pool boiling heat transfer with nanofluids for the enhancement of critical heat flux: A review. International Journal of Thermal Sciences.2015; 87:228–240.
Leong KY, Razali I, Ku Ahmad KZ, Ong HC, Ghazali MJ, Abdul Rahman MR. Thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: An experimental approach. International Communications in Heat and Mass Transfer. 2018; 90:23–28.
Kumar MS, Vasu V, Gopal AV. Thermal conductivity and rheological studies for Cu–Zn hybrid nanofluids with various basefluids. Journal of the Taiwan Institute of Chemical Engineers. 2016; 66:321–327.
Hemmat Esfe M, Abbasian Arani AA, Rezaie M, Yan WM, Karimipour A. Experimental determination of thermal conductivity and dynamic viscosity of Ag-MgO/water hybrid nanofluid. International Communications in Heat and Mass Transfer. 2015; 66:189–195.
Paramashivaiah BM, Rajashekhar CR. Studies on effect of various surfactants on stable dispersion of graphene nano particles in simarouba biodiesel. IOP Conference Series: Materials Science and Engineering. 2016; 149.
Al-Waeli AHA, Chaichan MT, Kazem HA, Sopian K. Evaluation and analysis of nanofluid and surfactant impact on photovoltaic-thermal systems. Case Studies in Thermal Engineering. 2019;13:100392.
Zhai Y, Li L, Wang J, Li Z. Evaluation of surfactant on stability and thermal performance of Al2O3-ethylene glycol (EG) nanofluids. Powder Technology. 2019; 343:215–224.
Wen D, Lin G, Vafaei S, Zhang K. Review of nanofluids for heat transfer applications. Particuology. 2009; 7:141–150.
Akilu S, Baheta AT, Sharma KV. Experimental measurements of thermal conductivity and viscosity of ethylene glycol-based hybrid nanofluid with TiO2-CuO/C inclusions. Journal of Molecular Liquids. 2017; 246:396–405.
Das PK. A review based on the effect and mechanism of thermal conductivity of normal nanofluids and hybrid nanofluids. Journal of Molecular Liquids. 2017; 240:420–446.
Hamzah MH, Sidik NAC, Ken TL, Mamat R, Najafi G. Factors affecting the performance of hybrid nanofluids: A comprehensive review. International Journal of Heat and Mass Transfer. 2017; 115:630–646.
Ghadimi A, Saidur R, Metselaar HSC. A review of nanofluid stability properties and characterization in stationary conditions. International Journal of Heat and Mass Transfer. 2011; 54:4051–4068.
Askari S, Lotfi R, Rashidi AM, Koolivand H, Koolivand-Salooki M. Rheological and thermophysical properties of ultra-stable kerosene-based Fe3O4/Graphene nanofluids for energy conservation. Energy Conversion and Management. 2016; 128:134–144.
Said Z, Saidur R. Thermophysical Properties of Metal Oxides Nanofluids. Nanofluid Heat and Mass Transfer in Engineering Problems. 2017.
Yagnem AR, Venkatachalapathy S. Heat transfer enhancement studies in pool boiling using hybrid nanofluids. Thermochimica Acta. 2019; 672:93–100.
Huminic G, Huminic A. Hybrid nanofluids for heat transfer applications – A state-of-the-art review. International Journal of Heat and Mass Transfer. 2018; 125:82–103.
Nabati Shoghl S, Jamali J, Keshavarz Moraveji M. Electrical conductivity, viscosity, and density of different nanofluids: An experimental study. Experimental Thermal and Fluid Science. 2016; 74:339–346.
Yarmand H, Gharehkhani S, Shirazi SFS, Goodarzi M, Amiri A, Sarsam WS, Alehashem MS, Dahari M, Kazi SN. Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer. 2016; 77:15–21.
Yarmand H, Gharehkhani S, Ahmadi G, Shirazi SFS, Baradaran S, Montazer E, Zubir MNM, Alehashem MS, Kazi SN, Dahari M. Graphene nanoplatelets-silver hybrid nanofluids for enhanced heat transfer. Energy Conversion and Management. 2015 ;100:419–428.
Yarmand H, Gharehkhani S, Shirazi SFS, Amiri A, Alehashem MS, Dahari M, Kazi SN. Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe. Energy Conversion and Management. 2016; 114:38–49.
Nguyen CT, Desgranges F, Roy G, Galanis N, Mare T, Boucher, Mintsa HA. Temperature and particle-size dependent viscosity data for water-based nanofluids - Hysteresis phenomenon. International Journal of Heat and Fluid Flow. 2007; 28:1492–1506.
Kole M, Dey TK. Viscosity of alumina nanoparticles dispersed in car engine coolant. Experimental Thermal and Fluid Science. 2010; 34:677–683.
Kallamu UM, Ibrahim JS, Sharifpur M, Meyer JP. Experimental Investigation on Viscosity of Nanofluids Prepared From Banana Fibre-Nanoparticles. In: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malaga, Spain, pp.1713-1718 ; 2016.
Adewumi GA, Inambao F, Sharifpur M, Meyer JP. Investigation of the Viscosity and Stability of Green Nanofluids from Coconut Fibre Carbon Nanoparticles: Effect of Temperature and Mass Fraction. International Journal of Applied Engineering Research. 2018; 13:8336–8342.
Namburu PK, Kulkarni DP, Misra D, Das DK. Viscosity of copper oxide nanoparticles dispersed in ethylene glycol and water mixture. Experimental Thermal and Fluid Science. 2007; 32:397–402.
Dardan E, Afrand M, Meghdadi Isfahani AH. Effect of suspending hybrid nano-additives on rheological behavior of engine oil and pumping power. Applied Thermal Engineering. 2016;109:524–534.
Sundar LS, Singh MK, Sousa ACM. Enhanced heat transfer and friction factor of MWCNT-Fe3O4/water hybrid nanofluids. International Communications in Heat and Mass Transfer. 2014; 52:73–83.
Kumar PM, Kumar J, Tamilarasan R, Sendhilnathan S, Suresh S. Review on nanofluids theoretical thermal conductivity models. Engineering Journal. 2015; 19:67–83.
Issa RJ. Effect of Nanoparticles Size and Concentration on Thermal and Rheological Properties of AL2O3-Water Nanofluids. In: Proceedings of the World Congress on Momentum, Heat and Mass Transfer, Prague, Czech Repulic; 4-5 April, 2016.
Ghanbarpour M, Bitaraf Haghigi E, Khodabandeh R. Thermal properties and rheological behavior of water based Al2O3 nanofluid as a heat transfer fluid. Experimental Thermal and Fluid Science. 2014; 53:227–235.
Gangadevi R, Vinayagam BK, Senthilraja S. Effects of sonication time and temperature on thermal conductivity of CuO/water and Al2O3/water nanofluids with and without surfactant. Materials Today: Proceedings. 2018; 5:9004–9011.
Syam Sundar L, Singh MK, Sousa ACM. Investigation of thermal conductivity and viscosity of Fe3O4 nanofluid for heat transfer applications. International Communications in Heat and Mass Transfer. 2013; 44:7–14.
Li H, Wang L, He Y, Hu Y, Zhu J, Jiang B. Experimental investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluids. Applied Thermal Engineering. 2014; 88:363–368.
Batmunkh M, Tanshen MdR, Nine MdJ, Myekhlai M, Choi H, Chung H, Jeong H. Thermal conductivity of TiO2 nanoparticles based aqueous nanofluids with an addition of a modified silver particle. Industrial and Engineering Chemistry Research. 2014; 53:8445–8451.
Esfahani NN, Toghraie D, Afrand M. A new correlation for predicting the thermal conductivity of ZnO–Ag (50%–50%)/water hybrid nanofluid: An experimental study. Powder Technology. 2018; 323:367–373.
Nabil MF, Azmi WH, Abdul Hamid K, Mamat R, Hagos FY. An experimental study on the thermal conductivity and dynamic viscosity of TiO2-SiO2 nanofluids in water: Ethylene glycol mixture. International Communications in Heat and Mass Transfer. 2017; 86:181–189.
Wang BX, Zhou LP, Peng XF, Du XZ, Yang YP. On the specific heat capacity of CuO nanofluid. Advances in Mechanical Engineering:SAGE Journals. 2010; 2010.
Shin D, Banerjee D. Specific heat of nanofluids synthesized by dispersing alumina nanoparticles in alkali salt eutectic. International Journal of Heat and Mass Transfer. 2014; 74:210–214.
Elias MM, Mahbubul IM, Saidur R, Sohel MR, Shahrul IM, Khaleduzzaman SS, Sadeghipour S. Experimental investigation on the thermo-physical properties of Al2O3 nanoparticles suspended in car radiator coolant. International Communications in Heat and Mass Transfer. 2014; 54:48–53.
Cabaleiro D, Gracia-Fernández C, Legido JL, Lugo L. Specific heat of metal oxide nanofluids at high concentrations for heat transfer. International Journal of Heat and Mass Transfer. 2015; 88:872–879.
O’Hanley H, Buongiorno J, McKrell T, Hu LW. Measurement and model validation of nanofluid specific heat capacity with differential scanning calorimetry. 2012.
Vajjha RS, Das DK. Specific Heat Measurement of Three Nanofluids and Development of New Correlations. Journal of Heat Transfer. 2009;131:071601.
Vajjha RS, Das DK. A review and analysis on influence of temperature and concentration of nanofluids on thermophysical properties, heat transfer and pumping power. International Journal of Heat and Mass Transfer. 2012; 55:4063–4078.
Hussein AM, Bakar RA, Kadirgama K, Sharma KV. Experimental measurement of nanofluids thermal properties. International Journal of Automotive and Mechanical Engineering. 2013; 7:850–863.
Mahbubul IM. Thermophysical Properties of Nanofluids. 2019.
Jeanmonod DJ, Rebecca, K. et al. Suzuki. Thermophysical Properties of Metal Oxides Nanofluids. Intech open. 2018; 2:64.
Leong KY, Ong HC, Amer NH, Norazrina MJ, Risby MS, Ku Ahmad KZ. An overview on current application of nanofluids in solar thermal collector and its challenges. Renewable and Sustainable Energy Reviews. 2016; 53:1092–1105.
Yarmand H, Gharehkhami S, Shirazi SFS, Goodarzi M, Amiri A, Sarsam WS, Alehashem MS, Dahari M, Kazi SN. Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer. 2016; 77:15–21.
Raja M, Vijayan R, Dineshkumar P, Venkatesan M. Review on nanofluids characterization, heat transfer characteristics and applications. Renewable and Sustainable Energy Reviews. 2016; 64:163–173.
Gu B, Hou B, Lu Z, Wang Z, Chen S. Thermal conductivity of nanofluids containing high aspect ratio fillers. International Journal of Heat and Mass Transfer. 2013; 64:108–114.
Simpson S, Schelfhout A, Golden C, Vafaei S. Nanofluid Thermal Conductivity and Effective Parameters. Applied Sciences. 2018; 9:87.
Xie H, Yu W, Chen W. MgO nanofluids: Higher thermal conductivity and lower viscosity among ethylene glycol-based nanofluids containing oxide nanoparticles. Journal of Experimental Nanoscience. 2010; 5:463–472.
Yarmand H, Gharehkhani S, Shirazi SFS, Amiri A, Montazer, Arzani HK, Sadri R, Dahari M, Kazi SN. Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties. International Communications in Heat and Mass Transfer. 2016; 72:10–15.
Yang Y, Zhang ZG, Grulke EA, Anderson WB, Wu G. Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow. International Journal of Heat and Mass Transfer. 2005; 48:1107–1116.
Nguyen CT, Desgranges F, Galanis N, Roy G, Mare T, Boucher S, Mintsa HA. Viscosity data for Al2O3-water nanofluid-hysteresis: is heat transfer enhancement using nanofluids reliable?. International Journal of Thermal Sciences. 2008; 47:103–111.
Adewumi GA, Inambao F, Sharifpur M, Meyer JP. Investigation of the Viscosity and Stability of Green Nanofluids from Coconut Fibre Carbon Nanoparticles: Effect of Temperature and Mass Fraction. International Journal of Applied Engineering Research. 2018; 13:8336–8342.
Das SK, Putra N, Roetzel W. Pool boiling of nano-fluids on horizontal narrow tubes. International Journal of Multiphase Flow. 2003; 29:1237–1247.
Das SK, Putra N, Roetzel W. Pool boiling characteristics of nano-fluids. International Journal of Heat and Mass Transfer. 2003; 46:851–862.
Moldoveanu GM, Minea AA. Specific heat experimental tests of simple and hybrid oxide-water nanofluids: Proposing new correlation. Journal of Molecular Liquids. 2019; 279:299–305.
Shahrul IM, Mahbubul IM, Khaleduzzaman SS, Saidur R, Sabri MFM. A comparative review on the specific heat of nanofluids for energy perspective. Renewable and Sustainable Energy Reviews. 2014;38:88–98.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
