Thermal performance enhancement of flat plate solar air heater using transverse U-shaped turbulator - A numerical study

M. S. Manjunath; R. Venkatesh; N. Madhwesh

doi:10.15282/jmes.13.3.2019.22.0448

Authors

M. S. Manjunath School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, DIAC-G-008, International Academic City, P.O. Box 345050, Dubai, UAE
R. Venkatesh School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, DIAC-G-008, International Academic City, P.O. Box 345050, Dubai, UAE
N. Madhwesh Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India, 576104.

DOI:

https://doi.org/10.15282/jmes.13.3.2019.22.0448

Keywords:

solar air heater, CFD, turbulence

Abstract

The aim of this study is to determine the effect of U-shaped rib turbulator on the flow and heat transfer characteristics of flat plate solar air heater using two dimensional CFD analysis. The analysis is carried out using the CFD software tool ANSYS Fluent for the flow Reynolds number ranging from 9000 to 21,000.The relative pitch(P/e) of the U-shaped rib is varied as 5, 10, 25 and 40 for a fixed relative rib height of 0.0421. It is shown that the U-shaped rib augments the Nusselt number by about 1.76 times while the friction factor increased by about 1.95 times with reference to smooth duct for a relative pitch of 10 and 5 respectively. The maximum thermal enhancement factor is obtained as 1.5 for the configuration of P/e=25. A comparative analysis of U-shaped rib with circular rib reveals that the U-shaped rib turbulator is found to be more effective in providing heat transfer enhancement and has about 15% higher thermal enhancement factor as compared to circular turbulator.

References

Al-Kayiem HH, Md Yunus Y. Drying of empty fruit bunches as wasted biomass by hybrid solar–thermal drying technique. Journal of Mechanical Engineering and Sciences 2013;5:652-661.

Anil SY, Bhagoria JL. A numerical investigation of square sectioned transverse rib roughened solar air heater. International Journal of Thermal Sciences 2014;79: 111–31.

Anil SY, Bhagoria JL. Numerical investigation of flow through an artificially roughened solar air heater, International Journal of Ambient Energy 2015;36:2, 87-100.

Inderjeet S, Sukhmeet S. CFD analysis of solar air heater duct having square wave profiled transverse ribs as roughness elements. Solar Energy 2018;162: 442–53.

Vipin G, Dhoble AS, Zodpe DB. Experimental and CFD-based thermal performance prediction of solar air heater provided with chamfered square rib as artificial roughness. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2016;38(2):643.

Anil SY, Bhagoria JL. Heat transfer and fluid flow analysis of an artificially roughened solar air heater: A CFD based investigation. Frontiers in Energy 2014;8(2):201–11.

Vipin G, Dhoble AS, Zodpe DB. CFD analysis to study effect of circular vortex generator placed in inlet section to investigate heat transfer aspects of solar air heater. The Scientific World Journal 2014.

Anil SY, Bhagoria JL. A numerical investigation of turbulent flows through an artificially roughened solar air heater. Numerical Heat Transfer; Part A: Applications 2014;65(7):679–98.

Rajeev R, Paswan MK, Prasad N. CFD analysis of thermal performance in isosceles right triangle rib roughness on the absorber plate solar air heater. Indian Journal of Science and Technology 2016;9(38)

Vipin G, Dhoble AS, Zodpe DB, Sunil Chamoli. Experimental and CFD-based thermal performance prediction of solar air heater provided with right-angle triangular rib as artificial roughness. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2016;38(2):551-579.

Anil SY, Bhagoria JL. A CFD based thermo-hydraulic performance analysis of an artificially roughened solar air heater having equilateral triangular sectioned rib roughness on the absorber plate. International Journal of Heat and Mass Transfer 2014;70:1016–39.

Bhagoria J, Saini J, Solanki S. Heat transfer coefficient and friction factor correlations for rectangular solar air heater duct having transverse wedge shaped rib roughness on the absorber plate. Renewable Energy 2002;25(3):341–369.

Deep ST, Mohammed Kaleem Khan, Manabendra Pathak. Performance evaluation of solar air heater with novel hyperbolic rib geometry. Renewable Energy 2017;105:786–97.

Vipin G, Dhoble AS, Zodpe DB, Sunil Chamoli. Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs. Solar Energy 2016;131:275–95.

Gupta AD. and Varshney L. Performance prediction for solar air heater having rectangular sectioned tapered rib roughness using CFD. Thermal Science and Engineering Progress 2017;4:122–132.

Kumar R, Goel V, Kumar A. Investigation of heat transfer augmentation and friction factor in triangular duct solar air heater due to forward facing chamfered rectangular ribs: A CFD based analysis. Renewable Energy 2018;115:824–835.

Menni Y., Azzi A, Chamkha AJ. Optimal thermo aerodynamic performance of S-shaped baffled channels. Journal of Mechanical Engineering and Sciences 2018;12(3):3888 - 3913.

Gilani SE, Al-Kayiem HH, Woldemicheal DE. Effect of conical pin arrangement on heat transfer efficiency of a free convective solar air heater. Journal of Mechanical Engineering and Sciences. 2016;10:2:2053-2064.

Jaurker AR, Saini JS, Gandhi BK. Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness. Solar Energy 2006;80(9);895–907.

Kamali R, Binesh AR. The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces. International Communications in Heat and Mass Transfer 2008;35:1032-1040.

Shaofei Z, Tingwu Ji, Gongnan Xie, Bengt Sunden. On the improvement of the poor heat transfer lee-side regions of square cross-section ribbed channels. Numerical Heat Transfer Part A: Applications: An International Journal of Computation and Methodology 2014;66(9):963-989.

Gupta D, Solanki SC, Saini JS. Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates. Solar Energy 1993;51(1):31-37.

ANSYS FLUENT documentation, ANSYS Inc.