Volume 15 No. 4 (December 2021)

Article

• Properties of concrete containing microwaved sewage sludge ash

  M.A. Azed, D.S. Ing

  8469 - 8479

  • PDF

• Spectral subtraction-based filter for experimental modal analysis under harmonics excitation force

  C.K.E. Nizwan, M.F. Ghazali, A.R. Yusoff

  8480 - 8489

  • PDF

• Acoustic methods in real-time welding process monitoring: Application and future potential advancement

  M. F. M. Yusof, M. Ishak, M.F. Ghazali

  8490 - 8507

  • PDF

• Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process

  M. I. A. Latiff, I. Ismail, D.M. Nuruzzaman

  8508 - 8517

  • PDF

• Effect of Alkaline treatment on the characteristics of pineapple leaves fibre and PALF/PP biocomposite

  S. Gnanasekaran, N.I.A.A. Nordin, M.M.M. Hamidi, J.H. Shariffuddin

  8518 - 8528

  • PDF

• Green strength properties of waterjet abrasive waste as potential composition in green mould by Taguchi and ANOVA approach

  N.F.B.W. Anuar, M.L. Mohd Khusairi, R.M. Saad, S.A. Hassan, Z. Marjom, A.H. Abdul Rasib

  8529 - 8539

  • PDF

• Modelling of cutting forces and surface roughness evolutions during straight turning of Stellite 6 material based on response surface methodology, artificial neural networks and support vector machine approaches

  B. Ben Fathallah, R. Saidi, S. Belhadi, M.A. Yallese, T. Mabrouki

  8540 - 8554

  • PDF

• Modal testing and modelling the dynamic characteristics of a plate with bolted joints

  A.R. Bahari, M. A. Yunus, M.N. Abdul Rani, A.A. Prakasam

  8555 - 8564

  • PDF

• The study of redistribution in residual stresses during fatigue crack growth

  M. Noghabi, I. Sattari-far, H. Hosseini Toudeshky

  8565 - 8579

  • PDF

• Transient cooling of two circular cylinders arranged in Tandem and bounded by an adiabatic wall

  N.H. Saeid, N. Hasan, Seri Rahayu Ya'akob, S. Shuib

  8580 - 8591

  • PDF

• Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L

  M.H. Zul, M. Ishak, M. H. Aiman, M. M. Quazi

  8592 - 8600

  • PDF

• Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing

  A.J. Sulaiman H., M. H. Aiman, M. Ishak, M. M. Quazi, T. Zaharinie, T. Ariga

  8601 - 8607

  • PDF

• Referencing technique for phase detection in eddy current evaluation

  N.A. Nadzri, M.M. Saari, M.A.H.P. Zaini, Z.A. Aziz

  8608 - 8616

  • PDF

• A Quasi-Brittle damage model in the framework of Bond-based Peridynamics with Adaptive Dynamic Relaxation method

  H.N. Yakin, N. Nikabdullah, M.R.M. Rejab

  8617 - 8623

  • PDF

• Experimental investigation of thermal performance in a rectangular channel using compound structure

  P. S. Patil, K. K. Dhande

  8624 - 8634

  • PDF

• The improvement of bolted joints model via finite element model updating method

  M. A. Yunus, M.N. Abdul Rani, M.A.S. Aziz Shah, M.S.M. Sani, Z. Yahya

  8635 - 8643

  • PDF

• Investigation of microstructure and mechanical characteristic of underwater friction stir welding for Aluminum 6061 alloy – Silicon carbide (SiC) metal matrix composite

  Ibrahim Sabry

  8644 - 8652

  • PDF