Volume 15 No. 2 (June 2021)

Article

• Convective heat transfer and fluid flow characteristics in fin and oval-tube heat exchanger

  Y. Abdoune, D. Sahel, R. Benzeguir, K. Alem

  7936 - 7947

  • PDF

• Novel use of the Monte-Carlo methods to visualize singularity configurations in serial manipulators

  M.I.M. Abo Elnasr, Hussein M Bahaa, Ossama Mokhiamar

  7948 - 7963

  • PDF

• CFD analysis of unsteady and anisotropic turbulent flow in a circular-sectioned 90° bend pipe with and without ribs: A comparative computational study

  R. Chiremsel, A. Fourar, F. Massouh, Z. Chiremsel

  7964 - 7982

  • PDF

• Effects of reverse cold rolling on the microstructure, texture and mechanical properties of AA1100 aluminium alloys

  O. Rivero, D. R. Pico, L. G. Castruita, F. García-Pastor, J. Unfried-Silgado

  7983 - 7992

  • PDF

• The effect of surfactant concentration on nanoparticles surface wettability during wettability alteration of oil-wet carbonate rock

  W.M.S.M. Latif, M. S. M. Musa, A.S.M. Balakirisnan, W. R. W. Sulaiman

  7993 - 8002

  • PDF

• Detection and identification of subcutaneous defects using ultrasonic waves in reflective test

  M. Poursan Dalir, E. Hedayati, A. Hedayati

  8003 - 8015

  • PDF

• Numerical study of hemodynamics after stent implantation during the cardiac cycle

  A. Belaghit, B. Aour, M. Larabi, A. A. Tadjeddine, S. Mebarki

  8016 - 8028

  • PDF

• Variability analysis of ABS solid fuel manufactured by fused deposition modeling for hybrid rocket motors

  J. A. Urrego P., F.A. Rojas M., J. R. Muñoz L.

  8029 - 8041

  • PDF

• Experimental investigation of cutting temperature and surface roughness for different cutting fluids during turning of Duplex stainless steel-2205 under minimum quantity lubrication technique

  Prashantha Kumar S T, Thirtha Prasada HP

  8042 - 8056

  • PDF

• An FEA based study of thermal behaviour of ultrasonically welded phosphor bronze sheets

  Bharat Sanga, Reeta Wattal, Dr., D. S. Nagesh, Dr.

  8057 - 8071

  • PDF

• Simulation of corrosion field measurement on reinforced concrete using BEM

  M. Ihsan, S. Fonna, N. Islami, Faizar ., A. K. Ariffin

  8072 - 8081

  • PDF

• Magnetohydrodynamic peristaltic flow of Bingham fluid in a channel: An application to blood flow

  C. Rajashekhar, G. Manjunatha, F. Mebarek-Oudina, Hanumesh Vaidya, K. V. Prasad, K. Vajravelu, A. Wakif

  8082 - 8094

  • PDF

• Nature-inspired solutions to bluff body aerodynamic problems: A review

  N. A. Siddiqui, M. Agelin-Chaab

  8095 - 8140

  • PDF

• Investigation on the effect of opening position across an isolated building for wind-driven cross ventilation

  L.K. Moey, K.L. Chan, V.C. Tai, T.F. Go, P. L. Chong

  8141 - 8152

  • PDF

• Improving the performance of a diesel engine by changing injectors characteristics after reduction on the compression ratio

  Saeed Chamehsara, Mohammadreza Karami

  8153 - 8168

  • PDF

• An experimental investigation on mechanical performances of 3D printed lightweight ABS pipes with different cellular wall thickness

  B. Ergene, I. Şekeroğlu, Ç. Bolat, B. Yalçın

  8169 - 8177

  • PDF

• Discrete finite element model of reactive powder concrete columns confined with fiber reinforced polymer

  M. Abbassi, H. Dabbagh

  8178 - 8192

  • PDF

• Quintic B-spline collocation method for numerical solution of free vibration of tapered Euler-Bernoulli beam on variable Winkler foundation

  A. Ghannadiasl

  8193 - 8204

  • PDF

• Experimental study of low Reynolds number effects on aerodynamics of smooth and sinusoidal leading-edge wings in the vicinity of the ground

  A. A. Mehraban, M. H. Djavareshkian

  8205 - 8218

  • PDF