Energy absorption capability and deformation of laminated panels for armoured vehicle materials

N.A.  Rahman; S.  Abdullah; M.F.  Abdullah; W.F.H.  Zamri; M.Z.  Omar; Z.  Sajuri

doi:10.15282/ijame.13.3.2016.10.0300

Energy absorption capability and deformation of laminated panels for armoured vehicle materials

Authors

N.A. Rahman
S. Abdullah
M.F. Abdullah
W.F.H. Zamri
M.Z. Omar
Z. Sajuri

DOI:

https://doi.org/10.15282/ijame.13.3.2016.10.0300

Keywords:

Deformation, energy absorption, laminated panel, quasi-static analysis, S. Abdullah shahrum@ukm.edu.my

Abstract

Deformation; energy absorption; laminated panel; quasi-static analysis

Downloads

Published

2022-12-09

Issue

Vol. 13 No. 3 (2016): December

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]

“Energy absorption capability and deformation of laminated panels for armoured vehicle materials”, Int. J. Automot. Mech. Eng., vol. 13, no. 3, pp. 3657–3668, Dec. 2022, doi: 10.15282/ijame.13.3.2016.10.0300.

Download Citation

Similar Articles

M.F. Abdullah, S. Abdullah , N.A. Rahman, M.S. Risby, M.Z. Omar, Z. Sajuri, Improvement of high velocity impact performance of carbon nanotube and lead reinforced magnesium alloy , International Journal of Automotive and Mechanical Engineering: Vol. 13 No. 2 (2016): September
E. Satria, L. Son, M. Bur, M. Dzul Akbar, Finite Element Analysis to Determine Stiffness, Strength, and Energy Dissipation of U-Shaped Steel Damper under Quasi-Static Loading , International Journal of Automotive and Mechanical Engineering: Vol. 18 No. 3 (2021): September
Md. Ashraful Islam, M.A. Hasib, M. Hasan, S. Talapatra, Deformation Behaviour and Mechanical Response of Closed-cell Cellular Materials under Projectile Impact Using Various Shapes Impactors , International Journal of Automotive and Mechanical Engineering: Vol. 19 No. 3 (2022): September
Haseeb Shafaqat, Christopher Krüger, Peter Urban, Parametric Analysis of a Divided Rocker for Battery Electric Vehicles , International Journal of Automotive and Mechanical Engineering: Vol. 20 No. 1 (2023): March
X.Y. Ang, C.S. Hassan, S.Y. Soh, E.U. Olugu, N.F. Abdullah, L.J. Yu, N. Abdul Aziz, Evaluation of Automotive Bio-Composites Crash Box Performance , International Journal of Automotive and Mechanical Engineering: Vol. 20 No. 4 (2023): December
L. Son, M. Rusli, S.P. Putra, E. Satria, The Effect of Landing Gear Dimension Variation on the Static Strength and Dynamic Response of Unmanned Aerial Vehicle (UAV) , International Journal of Automotive and Mechanical Engineering: Vol. 20 No. 3 (2023): September
Ava A.K. Mohammed, Gailan Ismail Hassan, Younis Khalid Khdir, Mechanical Behavior of Hybrid Laminated Nano Composite Containing Equal Numbers of Glass and Carbon Fiber Plies , International Journal of Automotive and Mechanical Engineering: Vol. 20 No. 2 (2023): June
M. Nachtane, M. Tarfaoui, A. El Moumen, D. Saifaoui, H. Benyahia, Design and Hydrodynamic Performance of a Horizontal Axis Hydrokinetic Turbine , International Journal of Automotive and Mechanical Engineering: Vol. 16 No. 2 (2019): April-June
A. Keshavarzi, J. Marzbanrad, F. Haji Aboutalebi, Comparison of Energy Absorption in Circular Aluminium Crash Boxes with Rigid and Elastic Boundary Conditions: Numerical and Experimental Investigations , International Journal of Automotive and Mechanical Engineering: Vol. 16 No. 1 (2019): January-March
R. Nagahiro, N. Rosli, Y. Hangai, A. Yano, K. Amagai, Uniform Heating Model Analysis for the Formation Process of Aluminium Foam by Spot-Type Halogen Lamp , International Journal of Automotive and Mechanical Engineering: Vol. 16 No. 4 (2019): October-December

1-10 of 451 Next

You may also start an advanced similarity search for this article.

Energy absorption capability and deformation of laminated panels for armoured vehicle materials

Authors

DOI:

Keywords:

Abstract

Downloads

Published

Issue

Section

License

How to Cite

Similar Articles

Most read articles by the same author(s)

menu