Editorial Team

ADVISOR
Professor Dato' Ts. Dr. Yuserrie bin Zainuddin
Vice Chancellor, Universiti Malaysia Pahang, Pekan, Malaysia
 
Professor Dr. Md. Mustafizur Rahman
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang
26600 Pekan, Pahang, Malaysia
Specialisation: Advanced material processing; Sustainable energy; Alternative fuels
 
EDITOR-IN-CHIEF
Assoc. Prof. Dr. Syarifah Nur Aqida Syed Ahmad  
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang
26600 Pekan, Pahang, Malaysia
Email: ijame@ump.edu.my
Specialisation: Coating; Laser Technology; Surface Engineering; Wear and Tear
 
INTERNATIONAL EDITORIAL BOARD MEMBERS
 
Professor Dr. Erich Hahne
Institute of Thermodynamics and Heat Transfer
Universität Stuttgart, Germany
 
Professor Dr. Viktor P. Astakhov
2186 Woodleaf St. Okemos, MI 48864
University of Michigan, USA
 
Professor Dr. Hojat Adeli
College of Engineering, Ohio State University
Columbus, OH 43210 U.S.A.
 
Professor Dr. Ferri M. H. Aliabadi
Head of Department, Aeronautics, Imperial College
South Kensington Campus, London, UK

Professor Kevin L. Edwards
School of Engineering, University of Derby, UK
 
Professor Dr. Goodarz Ahmadi
Department of Mechanical and Aeronautical Eng.
Dean, Wallace H. Coulter School of Engineering
Clarkson University, USA
 
Professor Dr. Dennis Assanis
Director, Automotive Research Center
Mechanical Eng. Dept, Uni. of Michigan, USA
 
Professor Dr. David Hui
Director, Composite Material Research Laboratory
University of New Orleans, USA
 
Professor Dr. S. A. Sherif
Department of Mechanical and Aerospace Engineering
University of Florida, USA.
 
Professor Dr. Xianguo Li
Department of Mechanical and Mechatronics Engineering
University of Waterloo, Canada
 
Professor Dr. Jamil A. Khan
Chair, Department of Mechanical Engineering
University of South Carolina, Columbia, USA
 
Professor Dr. Guoqiang Li
Department of Mechanical Engineering
Louisiana State University, USA
 
Professor Dr. Ibrahim Dincer
Faculty of Engineering and Applied Science
University of Ontario Institute of Technology (UOIT), Canada
 
Professor Dr. Joong Hee Lee
Dept of Polymer & Nano Engineering
Chonbuk National University, South Korea
 
Professor Dr. Gui Rong Liu
Department of Mechanical Engineering
National University of Singapore, Singapore
 
Professor Dr. Behrouz Gatmiri
Université Paris-Est, France
 
Professor Dr. A.K.M. Sadrul Islam
Department of Mechanical and Chemical Eng.
Islamic University of  Technology (IUT),
The Organization of the Islamic Conference (OIC), Dhaka, Bangladesh
 
Professor Dr. Bekir Sami Yilbas
Department of Mechanical Engineering,
King Fahd University of Petroleum and Minerals, Saudi Arabia
 
Professor Dr. Mohamad Kamal Bedewy
Department of Mechanical Design and Production, Faculty of Engineering
Misr University for Science and Technology, Egypt
 
Professor Dr. Kikou Kishimoto
Department of Mechanical Sciences and Engineering
Tokyo Institute of Technology, Japan
 
Professor Dr. Genki Yagawa
Director, Center for Computational Mechanics Research, Faculty of Engineering
Toyo University, Japan
 
Professor Dr. Ing. Livan Fratini
Dept. of Mechanical Technology, Production and Management Engineering,
University of Palermo, Palermo, Italy
 
Professor René de Borst
School of Engineering
University of Glasgow Rankine Building
Oakfield Avenue Glasgow G12 8LT, UK
 
Professor Dr. Pradeep K. Sen
Department of Applied Mechanics, IIT Delhi, New Delhi, India
 
Professor Dr. Viggo Tvergaard
Department of Mechanical Engineering
Technical University of Denmark, Denmark
 
Professor Dr. Mousa S.Mohsen 
Dean, Scientific Research and Graduate Studies
Hashemite University, Zarqa 13115 Jordan
 
Professor Dr. T. S. Zhao
Department of Mechanical Engineering
The Hong Kong University of Science & Technology, Hong Kong
 
Professor Dr. Ir. Joost Duflou
Department of Mechanical Engineering, Katholieke Universiteit Leuven
Heverlee-Leuven, Belgium
 
Professor Dr. Antti Samuli Korhonen
Department of Materials Science and Engineering
Helsinki University of Technology, Finland
 
Professor Dr. June-Yule Lee
Department of Marine Engineering
National Kaohsiung Marine University, Taiwan
 
Professor Dr. S. Srinivasa Murthy
Department of Mechanical Engineering
Indian Institute of Technology Madras, Chennai, India
  
Professor Dr. Youssef A. Shatilla
Masdar Institute of Science and Technology          
Abu Dhabi, UAE
 
Professor Dr. Ir. Marc Geers
Department of Mechanical Engineering
Eindhoven University of Technology, Netherlands
 
Professor Dr. Ing Ľubomír Šooś
Dean Faculty of Mechanical Engineering
Slovak University of Technology, Bratislava, Slovak Republic
 
Professor Dr. K. V. Sharma
Centre for Energy Studies,
J.N.T.U. College of Engineering,
Jawaharlal Nehru Technological University,
Hyderabad, Andhra Pradesh, India
  
Professor Dr. Luis Filipe Martins Menezes
Department of Mechanical Engineering
Coimbra University, Portugal
 
Professor Dr. Talal Yusaf
Mechanical & Mechatronic Engineering     
University of Southern Queensland, Australia
 
Dr. Kumar Vikram Singh
Department of Mechanical and Manufacturing Engineering, Miami University, USA

 

LOCAL EDITORIAL BOARD MEMBERS 

Emeritus Professor Dr. Masjuki Hj. Hassan
FASc, FIMechE (UK), CEng, PEng (Malaysia), MSAE (USA)
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia
Email: masjuki@um.edu.my

Professor Dr. Mohd Nasir Tamin
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Email: nasirtamin@utm.my

Professor Dr. Mohd Zamri Yusoff
Dean, College of Engineering, Universiti Tenaga Nasional, Bangi, Selangor, Malaysia
Email: zamri@uniten.edu.my

Professor Dr. A. K. M. Nurul Amin
Department of Manufacturing and Materials Engineering
Faculty of Engineering, International Islamic University Malaya, Kuala Lumpur, Malaysia
Email: akamin@iiu.edu.my 

Professor Dr. Hanafi Ismail
School of Materials and Mineral Resources Engineering  
Universiti Sains Malaysia, Penang, Malaysia
Email: hanafi@eng.usm.my

Professor Ir. Dr. Ramesh Singh
Department of Mechanical Engineering, Faculty of Engineering
Universiti Malaya, Kuala Lumpur, Malaysia
Email: ramesh79@um.edu.my  

Professor Dr. Md. Abdul Maleque
Department of Manufacturing and Materials Engineeing
International Islamic University Malaysia
53100 Gombak, Kuala Lumpur, Malaysia
Email: maleque@iium.edu.my

Professor Dr. Abdul Rashid Abdul Aziz
Department of Mechanical Engineering
Universiti Teknologi Petronas, Perak, Malaysia 
Email: rashid@petronas.com.my

Professor Dr. Zainal Alimuddin Zainal Alauddin
School of Mechanical Engineering
University Sains Malaysia, Penang, Malaysia
Email: mezainal@eng.usm.my

Professor Dr. Aidy Ali
Department of Mechanical Engineering
National Defence University of Malaysia (UPNM), Kuala Lumpur, Malaysia
Email: aidyali@upnm.edu.my

ASSOCIATE EDITORS

Assoc. Prof. Dr. Mohd Fadzil Faisae Ab. Rashid
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: ffaisae@ump.edu.my
Specialisation: Manufacturing system, Industrial engineering, Engineering optimisation, Metaheuristics, Operational research

Dr. Salwani Mohd Salleh
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: salwani@ump.edu.my
Specialisation: Impact, Vehicle safety, Design opimization, Finite element analysis

Dr. Norhaida Ab. Razak
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: norhaida@ump.edu.my
Specialisation: Mechanics of material, Creep, Fatigue and fracture, Finite element modelling

Dr. Amir Aziz
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: amiraziz@ump.edu.my
Specialisation: Alternative fuels, Internal combustion engines, Solid rocket propellant

Dr. Muhamad Zuhairi Sulaiman
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: zuhairi@ump.edu.my
Specialisation: Boiling, Heat transfer, Thermal-hydraulic, Turbomachinery, Power plant process, Plant engineering

Ir. Ts. Dr. Ngui Wai Keng
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: adnin@ump.edu.my
Specialisation: Vibration analysis, Machinery fault diagnosis, Signal processing, Machine learning, Nanotechnology

Dr. Mohd Adnin Hamidi
Faculty of Mechanical and Automotive Engineering Technology
Universiti Malaysia Pahang, 26600, Pekan, Malaysia
Email: adnin@ump.edu.my
Specialisation: Internal combustion engine, HCCI, CFD, Railway propulsion system, RAMS