Vol. 14 No. 1 (2017): March

Articles

• Effect of tensile strain rates on flow stress for extruded AZ31 and AZ61 magnesium alloys

  N. Abdul Latif, Z. Sajuri, J. Syarif

  3812-3823

  • PDF

• Stress corrosion damage on austenitic stainless steel in sodium chloride

  N. Islami, S. Rashid, A. K. Ariffin, M. Z. Nuawi

  3824-3836

  • PDF

• Buckling behaviour of imperfect axially compressed cylinder with an axial crack

  O. Ifayefunmi, S. H. Sheikh Md Fadzullah

  2180-1606

  • PDF

• Morphological analysis of injected sprays of different bio-diesel fuels by using a common rail setup controlled by a programmable electronic system

  P. Visconti, P. Primiceri, L. Strafella, A. P. Carlucci, A. Ficarella

  3849-3871

  • PDF

• Structural and mechanical characterisation of the chromium nitride hard coating deposited on the silicon and glass substrate

  Hetalkumar N. Shah

  3872-3886

  • PDF

• Dynamics properties of a Go-kart chassis structure and its prediction improvement using model updating approach

  N. A. Z. Abdullah, M. S. M. Sani, N. A. Husain, M. M. Rahman, I. Zaman

  3887-3897

  • PDF

• Automobile spare-parts forecasting: A comparative study of time series methods

  C. A. González Vargas, M. Elizondo Cortés

  3898-3912

  • PDF

• Experimental investigation on the performance of the TiO2 and ZnOhybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining

  N. S. M. Sahid, M.M. Rahman, K. Kadirgama, D. Ramasamy, M. A. Maleque

  3913-3926

  • PDF

• Computation of turbulent flow around a square block with standard and modified k-ε turbulence models

  A. Rusdin

  3938-3953

  • PDF

• Emission from a dual fuel operated diesel engine fuelled with Calophyllum Inophyllum biodiesel and producer gas

  S. K. Nayak, P. C. Mishra

  3954-3969

  • PDF

• A performance investigation on IoT enabled intra-vehicular wireless sensor networks

  Md. Arafatur Rahman, Jahan Ali, Muhammad Nomani Kabir, Saiful Azad

  3970-3984

  • PDF

• Evaluation of alternative drive systems based on driving patterns comparing Germany, China and Malaysia

  M. Schüller, S. Tewiele, T. Bruckmann, D. Schramm

  3985-3997

  • PDF

• Finite element analysis of diffusion effects on convective heat and the mass transfer of two fluids in a vertical channel

  B. Suresh Babu, G. Srinivas, G. V. P. N. Srikanth

  3998-4012

  • PDF

• Thermal stability analysis of functionally graded plates using simple refined plate theory

  Mokhtar Bouazza, Abderrahmane Boucheta, Tawfiq Becheri, Noureddine Benseddiq

  4013-4029

  • PDF

• Performance and emission characteristics of micro gas turbine engine fuelled with bioethanol-diesel-biodiesel blends

  N. Saifuddin, H. Refal, P. Kumaran

  4030-4049

  • PDF

• Multidisciplinary design optimisation methods for automotive structures

  R. D. Bäckryd, A. -B. Ryberg, L. Nilsson

  4050-4067

  • PDF

• Archachatina marginata bio-shells as reinforcement material in metal matrix composites

  M. Y. Kolawole, J. O. Aweda, S. Abdulkareem

  4068-4079

  • PDF

• Fatigue life prediction of titanium alloy for block loading using the hybrid approach of critical plane and continuum damage mechanics

  M. Kamal, M.M. Rahman

  4080-4096

  • PDF