Effect of ball burnishing medium on the surface characteristics of free machining brass
DOI:
https://doi.org/10.15282/jmmst.v4i1.3925Keywords:
finishing, burnishing, abrasives, surface roughness, microhardnessAbstract
Burnishing is becoming a promising surface finishing process to enhance materials surface properties. The control of the various process parameters yields the desired surface characteristics in brass materials. In the current work, free machining brass specimens were burnished by Abrasive Assisted Burnishing(AAB) process and Plain Burnishing (PB) process using ball burnishing tool. Response Surface Methodology was used to design the experiments in which Burnishing Force, Speed, Feed and Number of Passes were chosen as the process parameters. The minimum surface roughness achieved by PB and AAB was 0.1451 µm and 0.1041 µm respectively. The maximum surface hardness achieved using PB and AAB on the brass specimen was 207 HV and 248 HV respectively. The ball burnishing of free machining brass by AAB resulted in better surface characteristics as compared to the PB process.
References
Hassan, A. M., & Momani, A. M. (2000). Further improvements in some properties of shot peened components using the burnishing process. International Journal of Machine Tools and Manufacture, 40(12), 1775-1786.
Dabeer, P. S., & Purohit, G. K. (2010). Effect of ball burnishing parameters on Surface Roughness using surface roughness methodology. Advances in production engineering & management, 5(2), 111-116.
Hassan, A. M., & Al-Bsharat, A. S. (1996). Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metals. Wear, 199(1), 1-8.
El-Axir, M. H., & El-Khabeery, M. M. (2003). Influence of orthogonal burnishing parameters on surface characteristics for various materials. Journal of Materials Processing Technology, 132(1-3), 82-89.
Zhao, J.M., Ho, S. L., Piramanayagam, S. N., & Shi, J. Z. (2009). Optimizing tape‐burnishing/wiping process of magnetic recording media through Taguchi method. Quality and Reliability Engineering International, 25(3), 345-354.
Li FL Xia, W., Zhou, Z. Y., Zhao, J., & Tang, Z. Q. (2012). Analytical prediction and experimental verification of surface roughness during the burnishing process. International Journal of Machine Tools and Manufacture, 62, 67-75.
El-Axir, M. H., & Ibrahim, A. A. (2005). Some surface characteristics due to center rest ball burnishing. Journal of Materials Processing Technology, 167(1), 47-53.
Korzynski, M., & Pacana, A. (2010). Centreless burnishing and influence of its parameters on machining effects. Journal of Materials Processing Technology, 210(9), 1217-1223.
Gharbi, F., Sghaier, S., Morel, F., & Benameur, T. (2015). Experimental investigation of the effect of burnishing force on service properties of AISI 1010 steel plates. Journal of Materials Engineering and Performance, 24(2), 721-725.
Shreehah, T. A. A. (2008). Developing and investigating of elastic ball burnishing tool. The International Journal of Advanced Manufacturing Technology, 36(3-4), 270-279.
Franzen, V., Trompeter, M., Brosius, A., & Tekkaya, A. E. (2010). Finishing of thermally sprayed tool coatings for sheet metal forming operations by roller burnishing. International Journal of Material Forming, 3(1), 147-150.
Janczewski, Lukasz, Daniel Tobola, Witold Brostow, Kazimierz Czechowski, Haley Hagg Lobland, E.,, Marcin Kot, & Krzysztof Zagorski (2016). Effects of ball burnishing on surface properties of low density polyethylene. Tribology International, 93, 36-42.
Revankar, G. D., Shetty, R., Rao, S. S., & Gaitonde, V. N., (2017). Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process. Journal of Materials Research and Technology, 6(1),13-32.
Saldana-Robles, A., Plascencia-Mora, H., Aguilera-Gomez E., Marquez-Herrera, A., & Diosdado-De la Pena, J. A. (2018). Influence of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel. Surface and Coatings Technology, 339, 191-198.
Khalilpourazary, S. & Salehi, J. (2019). How alumina nanoparticles impact surface characteristics of Al7175 in roller burnishing process. Journal of Manufacturing Processes, 39, 1-11
Nguyen, T. T., Cao, L. H., Nguyen, T. A., & Dang, X. P. (2020). Multi-response optimization of the roller burnishing process in terms of energy consumption and product quality. Journal of Cleaner Production, 245, 19328
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Journal of Modern Manufacturing Systems and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
