Design and development of a modular vibration test rig for combination types of fault in rotating machinery health diagnosis

Authors

  • S. M. Silahuddin Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
  • A. M. Aizuddin Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
  • S. Mohamaddan Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
  • S. T. Syed Shazali Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
  • M. S. Z. M. Suffian Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
  • A. M. Tazuddin Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia
  • A. S. Abdullah Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), 94300 Kota Samarahan, Sarawak, Malaysia

DOI:

https://doi.org/10.15282/jmes.13.3.2019.08.0434

Keywords:

Rotating machine, vibration test rig, fault diagnosis, modular

Abstract

As a basis to real application of rotating machineries operation, a test rig imitating the operation is designed for the research environment. The purpose of this study is to design a modular test rig which is able to facilitate different fault component combinations and evaluate the deformation pattern of the fabricated test rig. Rotating machineries face the probability of having simultaneous different faults and the study of this condition is limited. The designed test rig could be arranged into multiple configurations by adding or excluding desired components due to its modularity. This will be useful to study the response of each component during operation as well as the response of combinations of fault components. Included in this study is the analysis of the design, the components of the test rig and the final design as well as the experimental data results of the fabricated test rig. This test rig is beneficial for understanding the vibrational behavior of components especially in educational environment.

References

Nikhil T, Chandrahas T, Chaitanya C, Sagar I, Sabareesh, GR. Design and Development of a Test-Rig for Determining Vibration Characteristics of a Beam, Procedia Engineering. 2016;144:312–320.

Róbert H, Pavelka P, Lengvarsky P. Vibration and modal analysis of a rotating disc using high-speed 3D digital image correlation. Mechanical Systems and Signal Processing. 2019;121:201–214.

Prieto MD, Cirrincione G, Espinosa AG, Ortega JA, Henao H. Bearing fault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks. Institute of Electrical and Electronic Engineers Transactions on Industrial Electronics. 2013;60(8):3398–3407.

Bediaga I, Mendizabal X, Arnaiz A, Munoa J. Ball bearing damage detection using traditional signal processing algorithms. Institute of Electrical and Electronic Engineers (IEEE) Instrumentation & Measurement Magazine. 2013;16(2):20–25.

Sharma S, Abed W, Sutton R, Subudhi B. Corrosion Fault Diagnosis of Rolling Element Bearing under Constant and Variable Load and Speed Conditions. International Federation of Automation Control-PapersOnLine, 2015;48(30):49–54.

Henriquez P, Alonso JB, Ferrer MA, Travieso CM. Review of automatic fault diagnosis systems using audio and vibration signals. Institute of Electrical and Electronic Engineers (IEEE) Transactions on Systems, Man, and Cybernetics: Systems. 2014;44(5):642–652.

Zhang Q, Zhao G, Shu L, Qin A, Zhang Y. Research of Dimensionless Index for Fault Diagnosis Positioning based on EMD. Journal of Computers, 2015;1(27):62–73.

Dhamande LS, Chaudhari MB. Detection of Combined Gear-Bearing Fault in Single Stage Spur Gear Box Using Artificial Neural Network. Procedia Engineering. 2016;144:759–766.

Lijesh KP. Design and Development of Test Rig to Estimate Performance of Spur Gears. International Journal of Advance Industrial Engineering. 2015;3(1):20–23.

Alkhadafe H, Al-Habaibeh A, Lotfi A. Condition monitoring of helical gears using automated selection of features and sensors. Measurement. 2016;93:164–177.

Yamamoto GK, Da Costa C, Da Silva Sousa JS. A smart experimental setup for vibration measurement and imbalance fault detection in rotating machinery. Case Studies in Mechanical Systems and Signal Processing. 2016;4:8–18.

Lee J, Wu F, Zhao W, Ghaffari M, Liao L, Siegel D. Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications. Mechanical Systems and Signal Processing. 2014;42(1–2):314–334.

Plante T, Stanley L, Nejadpak A, Yang CX. Rotating machine fault detection using principal component analysis of vibration signal. In: 2016 Institute of Electrical and Electronic Engineers (IEEE) AUTOTESTCON, Anaheim, California, USA, pp. 1-7; 2016.

Li W, Zhu Z, Jiang F, Zhou G, Chen G. Fault diagnosis of rotating machinery with a novel statistical feature extraction and evaluation method. Mechanical Systems and Signal Processing. 2015;50–51:414–426.

Wang P, Liu Y, Ong SK, Nee AYC. Modular design of machine tools to facilitate design for disassembly and remanufacturing. Procedia College International pour la Recherche en Productique (CIRP). 2014;15:443–448.

Peukert B, Saoji M, Uhlmann E. An evaluation of building sets designed for modular machine tool structures to support sustainable manufacturing. Procedia College International pour la Recherche en Productique (CIRP). 2015;26:612–617.

Ito Y. Applicability of ‘Platform Concept’ to machining function-integrated machine tools - A new ‘Raison d’être’ for modular design’. Mechanical Engineering Reviews. 2015;2(1):14-00320.

Dieter GE, Schmidt LC. Engineering design. vol. 3. McGraw-Hill New York, 2013.

Chuck Y. Relationship of torque and shaft size | Plant Engineering. Retrieved from http://www.plantengineering.com/single-article/relationship-of-torque-and-shaft-size/97eb6b3f6b32adcdd181341ebbdc3224.html; 11 June, 2017.

Lei G, Wang T, Zhu J, Guo Y, Wang S. System-Level Design Optimization Method for Electrical Drive Systems - Robust Approach. Institute of Electrical and Electronic Engineers (IEEE) Transactions on Industrial Electronics. 2015;62(8):4702–4713.

Downloads

Published

2019-09-26

How to Cite

[1]
S. M. Silahuddin, “Design and development of a modular vibration test rig for combination types of fault in rotating machinery health diagnosis”, J. Mech. Eng. Sci., vol. 13, no. 3, pp. 5323–5333, Sep. 2019.

Similar Articles

<< < 15 16 17 18 19 20 21 22 23 > >> 

You may also start an advanced similarity search for this article.