Optimization of thermal characteristics of axisymmetric synthetic air jet impingement on flat surface
DOI:
https://doi.org/10.15282/jmes.16.3.2022.14.0723Keywords:
Synthetic air jet, Local heat transfer coefficient , IR thermal imagingAbstract
The local heat transfer of axisymmetric synthetic air jet impinging on flat surface is investigated experimentally. Acoustic speaker is used for generation of synthetic air jet with cavity of cylindrical shape.The experiments is conducted for actuator frequency ranging from 50Hz to 400Hz, orifice diameter 2mm to 10mm, orifice plate thickness 2mm to 10mm, cavity diameter 50mm to 75mm, cavity depth 30mm to 60mm, jet to plate distance 16mm to 112mm. A steady heat flow is maintained on the flat surface. Local heat transfer characteristics on flat surface is found by thermal images using IR thermal imaging and thin foil technique.The experimental results reveals that the heat transfer is highly effected by frequency, orifice diameter, orifice plate thickness, jet to plate distance. However, cavity depth and cavity diameter has small influence on thermal performance.The higher cavity volume show more influence on heat transfer characteristics. An optimization of synthetic jet performance parameters is studied for maximum thermal performance interms of heat transfer characteristics.
References
B. L. Smith and A. Glezer, “The formation and evolution of synthetic jets,” Phys. of Fluids, vol. 10, no. 9, pp. 2281–2297, 1998.
A. Pavlova and M. Amitay, “Electronic cooling using synthetic jet impingement,” J. of Heat transf., vol. 128, no. 9, pp. 897–907, 2006.
J. Garg, M. Arik, S. Weaver, S. Saddoughi, “Meso scale pulsating jets for electronics cooling,” J. of Electronic Packaging, Trans. of ASME, vol. 127, no. 4, pp. 503 - 511, 2005.
M. B. Gillespie,W. Z. Black, C. Rinehart, A. Glezer, “Local convective heat transfer from a constant heat flux flat plate cooled by synthetic air jets,” J. of Heat Transf., vol. 128, no. 10, pp. 990 -1000, 2006.
R. Mahalingam and A. Glezer, “Design and thermal characteristics of a synthetic jet ejector heat sink,” J. of Electronic Packaging, Trans. of ASME, vol.127, no. 2, pp. 172–177, 2005.
M. Chaudhari, G. Verma, B. Puranik, A. Agrawal, “Frequency response of a synthetic jet cavity,” Exp. Thermal and Fluid Sci., vol. 33, no. 3, pp. 439 – 448, 2009.
M. Chaudhari, B. Puranik, A. Agrawal, “Effect of orifice shape in synthetic jet based impingement cooling,” Exp. Thermal and Fluid Sci., vol. 34, no. 2, pp. 246 –256, 2010.
M. Chaudhari, B. Puranik, A. Agrawal, “ Heat transfer characteristics of synthetic jet impingement cooling,” Int. J of Heat and Mass Transf., vol. 53, no. 5 - 6, pp. 1057–106, 2010.
M. Chaudhari, B. Puranik, A. Agrawal, “Multiple orifice synthetic jet for improvement in impingement heat transfer,” Int. J. of Heat and Mass Transf., vol. 54, no. 9-10, pp. 2056–2065, 2011.
M. Jain, B. Puranik, A. Agrawal, “A numerical investigation of effects of cavity and orifice parameters on the characteristics of a synthetic jet flow,” Sens. and Acts., vol. 165, no. 2, pp. 351–366, 2011.
Y. H. Liu, T. H. Chang, C. C. Wang, “Heat transfer enhancement of an impinging synthetic air jet using diffusion-shaped orifice,” App. Thermal Engg., vol. 94, pp. 178–185, 2016.
P. Ziade, M. A. Feero, P. E. Sullivan, “A numerical study on the influence of cavity shape on synthetic jet performance,” Int. J. of Heat and Fluid Flow, vol. 74, pp. 187–197, 2018.
D. Lytle and B. W. Webb, “Air jet impingement heat transfer at low nozzle-plate spacings,”Int. J. Heat Mass Transf., vol. 37, no. 12, pp. 1687-1697, 1994.
R. J. Talapati, V. V. Katti, N. S. Hiremath, “Local heat transfer characteristics of synthetic air jet impinging on a smooth convex surface,” Int. J. of Thermal Sci., vol. 170, 2021.
R. J. Talapati and V. V. Katti, “Influence of synthetic air jet temperature on local heat transfer characteristics of synthetic air jet impingement,” Int. Comm. in Heat and Mass Transfer, vol. 130, 2022.
R. J. Moffat, “Describing the Uncertainties in Experimental Results,” Exp. Thermal and Fluid Sci.,vol.1, no.1, pp.3-17,1988.
Y. Utturkar, M. Arik, C. E. Seeley, M. Gursoy, “An experimental and computational heat transfer study of pulsating Jets,” J. of Heat Transf., vol.130, no.6, 2008.
C. Lee, G. Hong, Q. P. Ha, S. G. Mallinson, “A piezoelectrically actuated micro synthetic jet for active flow control,” Sens. and Acts, vol. 108, no. 1–3, pp. 168 –174, 2003.
M. Jabbal, H. Tang, S. Zhong, “The effect of geometry on the performance of synthetic jet actuators,” The 25th International Congress of the Aeronautical Sciences, 2006.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Universiti Malaysia Pahang Publishing
This work is licensed under a Creative Commons Attribution 4.0 International License.
