Motion Planning and Tracking Trajectory of an Autonomous Emergency Braking Pedestrian (AEB-P) System Based on Different Brake Pad Friction Coefficients on Dry Road Surface

Authors

  • Z. Abdullah Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pahang, Malaysia
  • P.M. Heerwan Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pahang, Malaysia
  • M.A. Zakaria Faculty of Manufacturing and Mechatronic Engineering and Technology, Universiti Malaysia Pahang, 26600 Pahang, Malaysia
  • M.I. Ishak College of Engineering, Universiti Malaysia Pahang, 26600 Pahang, Malaysia
  • M.A. Shahrom Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pahang, Malaysia
  • B. Kujunni Faculty of Manufacturing and Mechatronic Engineering and Technology, Universiti Malaysia Pahang, 26600 Pahang, Malaysia

DOI:

https://doi.org/10.15282/ijame.19.3.2022.12.0772

Keywords:

Autonomous emergency braking, Artificial potential field, Motion planning, Tracking trajectory, Vehicle safety

Abstract

Accidents between vehicles and pedestrians usually occur when a pedestrian is crossing the road. An Autonomous Emergency Braking Pedestrian (AEB-P) is introduced to prevent collisions between vehicles and pedestrians. However, the performance of an AEB-P will be reduced when the brake pad is worn out on a dry road. In this study, the motion planning, namely Vehicle Conditional Artificial Potential Field (VC-APF), including a warning signal and emergency brake phase that generate the vehicle’s deceleration, is proposed to analyze the effect of brake pad on the AEB-P performance. Then, the vehicle’s deceleration is tracked by the tracking trajectory, where the PI controller is adapted to provide the optimum braking force. The function of PI control is to ensure the vehicle’s deceleration is approaching the desired deceleration. The performance of the proposed method has been simulated on the dry road surface with different brake pad coefficients; 0.4, 0.35, and 0.24. The simulation results show that the vehicle manages to stop colliding with a pedestrian on the dry road surface at the minimum safety distance range of 2.7-2.9 meters.

Author Biography

P.M. Heerwan, Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pahang, Malaysia

Automotive Engineering Center (AEC), Universiti Malaysia Pahang, 26600 Pahang, Malaysia

Downloads

Published

2022-10-11

How to Cite

[1]
A. Zulkifli, M. H. Peeie, M. A. Zakaria, M. I. Ishak, M.A. Shahrom, and B. Kujunni, “Motion Planning and Tracking Trajectory of an Autonomous Emergency Braking Pedestrian (AEB-P) System Based on Different Brake Pad Friction Coefficients on Dry Road Surface”, Int. J. Automot. Mech. Eng., vol. 19, no. 3, pp. 10002–10013, Oct. 2022.

Issue

Section

Articles

Similar Articles

<< < 9 10 11 12 13 14 15 16 17 18 > >> 

You may also start an advanced similarity search for this article.