Research of Determining Low-Reliability Elements of Multiple-Flows Compressed Air Braking System Based on Goal-Oriented (GO) Methodology

Authors

  • Ngoc-Tuan Vu Faculty of Vehicle and Energy Engineering, Le Quy Don Technical University, 236 Hoang Quoc Viet Str, Ha Noi 11917, Viet Nam
  • Le-Duy Phan Faculty of Vehicle and Energy Engineering, Le Quy Don Technical University, 236 Hoang Quoc Viet Str, Ha Noi 11917, Viet Nam
  • Van-Dung Nguyen Faculty of Vehicle and Energy Engineering, Le Quy Don Technical University, 236 Hoang Quoc Viet Str, Ha Noi 11917, Viet Nam
  • Quoc-Bao Vu Faculty of Vehicle and Energy Engineering, Le Quy Don Technical University, 236 Hoang Quoc Viet Str, Ha Noi 11917, Viet Nam

DOI:

https://doi.org/10.15282/ijame.18.2.2021.19.0675

Keywords:

Reliability; Automotive pneumatic brake system; Goal-oriented methodology

Abstract

The multi-flows pneumatic braking system is one of the modern braking systems equipped with truck vehicles which is a very complex system consisting of many elements connected in series or parallel. The reliability of the braking system has a significant influence on safety and the ability to manoeuvre. The study of identifying low-reliability elements in the brake system is of great significance to improve the efficiency of maintenance and repair. This article shows the research results that determine low-reliability elements of the multi-flows pneumatic brake system based on GO methodology, and allow to examine each element's reliability and the complex system. The reliability assessment model is built based on GO theory and statistics data collected at the used units about the frequency of damage, ability, and time to repair and restore the assemblies in the brake system. By using this model, the reliability of the assemblies and the whole system can be determined at any point in time relative to the actual operating time of the brake system. The article's research results can be applied for surveying other components’ reliability and complex systems such as steering or suspension systems.

Downloads

Published

2021-07-22

How to Cite

Vu, N.-T., Phan, L.-D., Nguyen, V.-D., & Vu, Q.-B. (2021). Research of Determining Low-Reliability Elements of Multiple-Flows Compressed Air Braking System Based on Goal-Oriented (GO) Methodology. International Journal of Automotive and Mechanical Engineering, 18(2), 8814–8824. https://doi.org/10.15282/ijame.18.2.2021.19.0675

Issue

Section

Articles