Pressure Drop of Partially Blocked Hagen-Poiseuille Flow using CFD Simulation

Authors

  • B. Tantaro Faculty of Mechanical Engineering, Faculty of Engineering, UCSI University Kuala Lumpur, Malaysia
  • Y. T. Wah Faculty of Mechanical Engineering, Faculty of Engineering, UCSI University Kuala Lumpur, Malaysia
  • R. W. Y. Yuen Faculty of Mechanical Engineering, Faculty of Engineering, UCSI University Kuala Lumpur, Malaysia

DOI:

https://doi.org/10.15282/ijame.17.1.2020.04.0559

Keywords:

Engineering piping, Piping blockage, Pressure drop, Internal flow, Hagen-Poiseuilli flow, Computational fluid dynamics

Abstract

Piping serves as an important pillar in most of the engineering applications while the quantification on the pressure drop due to various factors is always the central issue of efficient piping maintenance and design. In this study, the relationship between the pressure drop and the percentage of blockage in Hagen-Poiseuille flow is investigated. The analysis is executed using CFD commercial software of ANSYS Fluent. Our simulation discovered that the pressure drop will increase in an exponential manner with respect to constant increment of the blockage percentage. In other words, the power waste will increase exponentially too when the clot accumulates.

Downloads

Published

2020-03-30

How to Cite

[1]
B. Tantaro, Y. T. Wah, and R. W. Y. Yuen, “Pressure Drop of Partially Blocked Hagen-Poiseuille Flow using CFD Simulation”, Int. J. Automot. Mech. Eng., vol. 17, no. 1, pp. 7552–7561, Mar. 2020.

Issue

Vol. 17 No. 1 (2020): January-March

Section

Articles

Similar Articles

<< < 49 50 51 52 53 54 55 56 57 58 > >> 

You may also start an advanced similarity search for this article.