Vol. 7 (2013): January-June

Articles

• Sound and Vibration Signal Analysis using Improved Short-Time Fourier Representation

  June-Yule Lee

  811-819

  • PDF

• Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry

  A.N.M. Rose, B. Md. Deros, M.N. Ab. Rahman

  820-829

  • PDF

• Tracking Control of an Underactuated Gantry Crane using an Optimal Feedback Controller

  Firooz Bakhtiari-Nejad, Mostafa Nazemizadeh, Hanieh Arjmand

  830-839

  • PDF

• Effect of Ta2O5 Doping on the Microstructure and Dielectric Properties of BaTiO3 Based Ceramics

  Adnan Mousharraf, Md. Fakhrul Islam

  840-849

  • PDF

• Experimental Measurements of Nanofluids Thermal Properties

  Adnan M. Hussein, R.A. Bakar, K. Kadirgama, K.V. Sharma

  850-863

  • PDF

• Optimal Automobile Muffler Vibration and Noise Analysis

  Sujit Kumar Jha, Ajay Sharma

  864-881

  • PDF

• Microstructure and Fatigue Properties of Dissimilar Spot Welds Joints of AISI 304 and AISI 1008

  Nachimani Charde

  882-899

  • PDF

• Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over A Staggered Flat Tube Bank in Crossflow

  M. Ishak, Tahseen Ahmad Tahseen, Md. Mustafizur Rahman

  900-911

  • PDF

• Application of Multibody Simulation for Fatigue Life Estimation

  M. Kamal, Md. Mustafizur Rahman, M.S.M. Sani

  912-923

  • PDF

• Compliance Analysis, Optimization and Comparison for A NEW 3PUS-PU Mechanism

  B. Wei

  924-939

  • PDF

• Effect of Penalty Function Parameter in Objective Function of System Identification

  M.F. Abd Samad, H. Jamaluddin, R. Ahmad, M.S. Yaacob, A.K.M. Azad

  • PDF

• Modeling and Torque Tracking Control of Permanent Magnet Synchronous Motor (PMSM) for Hybrid Electric Vehicle

  Mohd Sabirin Rahmat, Fauzi Ahmad, Ahmad Kamal Mat Yamin, Vimal Rau Aparow, Noreffendy Tamaldin

  955-967

  • PDF

• Estimation of the Dynamic Properties of Epoxy Glass Fabric Composites with Natural Rubber Particle Inclusions

  H. Ravi Sankar, R.R. Srikant, P. Vamsi Krishna, V. Bhujanga Rao, P. Bangaru Babu

  968-980

  • PDF

• Pattern Development for Manufacturing Applications with Fused Deposition Modelling – A Case Study

  H. K. Garg, R. Singh

  981-992

  • PDF

• Validation of Crack Interaction Limit Model for Parallel Edge Cracks using Two-Dimensional Finite Element Analysis

  R. Daud, A.K. Ariffin, S. Abdullah

  993-1004

  • PDF

• Fatigue Life Prediction of Commercially Pure Titanium After Nitrogen Ion Implantation

  Nurdin Ali, M.S. Mustapa, M.I. Ghazali, T. Sujitno, M. Ridha

  1005-1013

  • PDF

• Atmospheric Corrosion of Structural Steels Exposed in the 2004 Tsunami-Affected Areas of Aceh

  M. Ridha, S. Fonna, S. Huzni, J. Supardi, A.K. Ariffin

  1014-1022

  • PDF

• Finite Element Modeling of Delamination Process on Composite Laminate using Cohesive Elements

  S. Huzni, Ilfan M., Sulaiman T., S. Fonna, M.Ridha and A.K. Arifin

  1023-1030

  • PDF

• Improved Vibration Characteristics of Flexible Polyurethane Foam via Composite Formation

  Chan Wen Shan , Mohd Imran Ghazali and Maizlinda Izwana Idris

  1031-1042

  • PDF

• Normal Incidence Sound Absorption Coefficient of Direct Piercing Carved Wood Panel with Daun Sireh Motif using Boundary Element Method

  Mohd Zamri Jusoh, Mohamad Ngasri Dimon, You Kok Yeow , Nazli Che Din, Rafidah Rosman

  1043-1052

  • PDF

• Analysis of Accent-Sensitive Words in Multi-Resolution Mel-Frequency Cepstral Coefficients for Classification of Accents in Malaysian English

  Yusnita M.A., Paulraj M.P., Sazali Yaacob, R. Yusuf, Shahriman A.B.

  1053-1073

  • PDF

• A Practical Application of Ensemble Averaged Surface Normal Impedance Measured In-Situ

  Nazli Che Din, Toru Otsuru, Reiji Tomiku, Mohd Zamri Jusoh, Mohamad Ngasri Dimon

  1074-1085

  • PDF

• Sound Transmission Loss of A Double-Leaf Partition with Micro-Perforated Plate Insertion under Diffuse Field Incidence

  A. Putra, A. Y. Ismail, Md. R. Ayob

  1086-1095

  • PDF