Process Capability Study of Rapid Casting Solution for Aluminium Alloys using Three Dimensional Printing

Authors

  • R. Singh

DOI:

https://doi.org/10.15282/ijame.4.2011.2.0032

Keywords:

Three-dimensional printing; process capability; aluminium alloys; dimensional accuracy; rapid casting

Abstract

In the present work, the best shell wall thickness of a mould cavity was investigated in a process capability study of a rapid casting  solution for aluminium alloys using threedimensional printing (3DP). Starting from the identification of a component/benchmark, an  aluminium-alloy casting prototype was produced with different shell wall thicknesses by three dimensional printing. The results of the study suggest that, at the best shell wall thickness (5 mm) for aluminium alloys, the rapid casting solution using a 3DP process lies within the ±3.999 sigma (σ) limit.

Downloads

Published

2022-12-09

How to Cite

[1]
R. Singh, “Process Capability Study of Rapid Casting Solution for Aluminium Alloys using Three Dimensional Printing”, Int. J. Automot. Mech. Eng., vol. 4, pp. 397–404, Dec. 2022.

Issue

Section

Articles

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.