Field-Dependent Viscoelastic Properties of Graphite-based Magnetorheological Grease

Authors

  • N.A.M. Nasir Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia.
  • N. Nazmi Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia.
  • N. Mohamad Faculty of Engineering, Universiti Malaysia Sabah, Jalan UMS, 88400, Kota Kinabalu, Sabah, Malaysia.
  • S.A. Mazlan Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia.
  • N.A. Nordin Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia.
  • E.F. Shair Rehabilitation and Assistive Technology (REAT) Research Group, Faculty of Electrical Engineering, Universiti Teknologi Malaysia Melaka, Malaysia.
  • M.A.A. Rahman Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia.

DOI:

https://doi.org/10.15282/ijame.19.3.2022.04.0764

Keywords:

Magnetorheological grease, Graphite, Storage modulus, Loss modulus, Viscoelastic properties

Abstract

This paper highlights the effect of graphite on the dynamic viscoelastic properties of magnetorheological grease (MRG). Two types of MRG namely MRG and graphite-MRG, GMRG with 0 wt.% and 10 wt. % of graphite respectively was synthesized by using a mechanical stirrer. The rheological properties of both sample at various magnetic field strength from 0 to 0.603 T was analyzed via rheometer under oscillatory mode with strain ranging from 0.001 to 1% with fixed frequency at 1 Hz for strain sweep and frequency ranging from 0.1 to 80 Hz at a constant strain of 0.01 % for frequency sweep. Based on the result obtained, the value of storage and loss modulus are dependent on the graphite content. A high value of storage modulus was achieved in the GMRG sample at all applied magnetic field strengths within all frequency ranges. These phenomena related to the contribution of graphite to forming the chain structure with CIPs and offered a more stable and stronger structure as compared with MRG. Moreover, the reduction in the value of loss modulus in GMRG was noticed compared to MRG at on-state conditions reflected by the stable structure obtained by GMRG. Lastly, both samples displayed a strong solid-like (elastic) behavior due to the high value of storage modulus, G’ acquired compared to loss modulus, G’’ at all frequency ranges. Therefore, the utilization of graphite in MRG can be used in wide applications such as brake and seismic dampers.

Downloads

Published

2022-09-30

How to Cite

[1]
N.A.M. Nasir, “Field-Dependent Viscoelastic Properties of Graphite-based Magnetorheological Grease ”, Int. J. Automot. Mech. Eng., vol. 19, no. 3, pp. 9921–9927, Sep. 2022.

Issue

Section

Articles

Similar Articles

<< < 11 12 13 14 15 16 17 18 19 20 > >> 

You may also start an advanced similarity search for this article.