Modelling and optimisation of the synergistic influence of maize husk ash and nano sugarcane fiber ash cement mortar compressive strength employing response surface methodology

Authors

  • Nura Shehu Aliyu Yaro Sustainable Environment and Transportation Research Group, Department of Civil Engineering Midlands, Durban University of Technology, Pietermaritzburg, 3201, Republic of South Africa , Durban University of Technology image/svg+xml https://orcid.org/0000-0002-7780-9620
  • Bonga Praisegod Khuzwayo Department of Civil Engineering and Geomatics, Durban University of Technology, Durban, 4000, Republic of South Africa , Durban University of Technology image/svg+xml
  • Zesizwe Ngubane Sustainable Environment and Transportation Research Group, Department of Civil Engineering Midlands, Durban University of Technology, Pietermaritzburg, 3201, Republic of South Africa , Durban University of Technology image/svg+xml
  • Jacob Adedayo Adedeji Sustainable Environment and Transportation Research Group, Department of Civil Engineering Midlands, Durban University of Technology, Pietermaritzburg, 3201, Republic of South Africa , Durban University of Technology image/svg+xml https://orcid.org/0000-0002-3222-7846

DOI:

https://doi.org/10.15282/construction.v6i2.14171

Keywords:

Maize husk ash, Nano sugarcane fibre ash, Compressive strength, Response surface methodology

Abstract

The increased worldwide interest in sustainable construction materials, linked to the rising amount of generated agricultural waste, has led researchers to the use of agro-waste in cementitious applications. To this end, this study investigates the interactive effects of maize husk ash and nano sugarcane fibre ash on the compressive strength development of cement mortar. A response surface methodology experimental design was employed to describe the interactions between maize husk ash (MHA) and nano sugarcane fibre ash (NSFA) and to identify an optimal mixture proportion for increased compressive strength. Thirteen experimental runs were generated in this study, and the compressive strength was determined at 7 and 28 days. The results of the study showed that the combination of MHA and NSFA increased the compressive strength compared to the control mix. The interaction between MHA and NSFA was found to be significant. This shows that MHA and NSFA work hand-in-hand to enhance microstructural densification, hasten hydration kinetics, and refine particle packing, although excessive MHA negatively impacted the early strength due to content dilution effects and delayed pozzolanic activity. The use of RSM optimisation was used to establish that the best combination was 8.25% MHA and 2.2% NSFA, with the predicted strength at 7 days being 9.58 MPa and at 28 days being 13.75 MPa. The accuracy and reliability of the RSM model to predict results are the outcome of high conformity between the experimental values and the predicted values. In addition, the model had a very low percentage error of less than 5%. The study shows that agro-waste can be used to improve strength, thereby positively impacting sustainability.

Downloads

Download data is not yet available.

Downloads

Published

2026-11-17

Issue

Section

Articles

How to Cite

[1]
N. S. A. Yaro, B. P. Khuzwayo, Z. Ngubane, and J. A. Adedeji, “Modelling and optimisation of the synergistic influence of maize husk ash and nano sugarcane fiber ash cement mortar compressive strength employing response surface methodology”, Constr., vol. 6, no. 2, p. In-Press, Nov. 2026, doi: 10.15282/construction.v6i2.14171.