Seismic Fragility Characterization of Grid-Like Frame Structures
DOI:
https://doi.org/10.15282/construction.v5i2.13231Keywords:
Sesimic Vulnerability, RC Frames, Grid Like Frames, Incremental Dynamic Analysis (IDA), Fragility CurvesAbstract
Historically, the design of reinforced concrete (RC) moment-resisting frames in regions of moderate seismicity, such as Malaysia, has been predominantly governed by gravity load requirements, which renders a considerable portion of the existing building stock vulnerable to earthquake-related risks. This study presents a parametric seismic fragility assessment of low-rise reinforced concrete (RC) grid-like frames, representative of structures in Malaysia where design has traditionally emphasized gravity loads. A suite of building archetypes was developed to capture systematic variations in key structural and geometric parameters, including plan configuration, story height, bay aspect ratio, column and beam cross-sectional area. Each archetype was subjected to Incremental Dynamic Analysis (IDA) using nine ground motion records from the PEER NGA-West2 database. Peak Ground Acceleration (PGA) was employed as the intensity measure, and maximum interstory drift ratio (MaxIDR) was adopted as the engineering demand parameter. Fragility functions were constructed for five predefined damage states specified by international seismic performance guidelines, ranging from Slight Damage to Collapse. Results indicate that archetypes with smaller member sizes and more rectangular bay layouts (lower aspect ratios) exhibit a significantly higher probability of extensive damage at lower shaking intensities. The proposed framework which comprises a fragility catalog for detailed risk evaluation and a computationally efficient regression model for rapid vulnerability screening—provides a valuable tool for seismic risk assessment, disaster mitigation planning, and prioritization of retrofitting strategies in Malaysia and similar regions.
Downloads
References
[1] J. Zhao, H. Jia, C. Yang, and B. Du, “Seismic fragility analysis of a high-pier bridge under pulse-like ground motion, based on a PCA and K-means approach,” Applied Sciences, vol. 13, no. 15, p. 8721, 2023.
[2] M. I. Adiyanto and T. A. Majid, “Seismic design of two storey reinforced concrete building in Malaysia with low class ductility,” Journal of Engineering Science and Technology, vol. 9, no. 1, pp. 27–46, 2014.
[3] R. Ismail and N. F. Zamahidi, “An evaluation of high-rise concrete building performance under low intensity earthquake effects,” in InCIEC 2014: Proceedings of the International Civil and Infrastructure Engineering Conference 2014, R. Hassan et al., Eds. Singapore: Springer, 2015, pp. 79–86.
[4] F. Tongkul, “An overview of earthquake science in Malaysia,” ASM Science Journal, vol. 14, pp. 1–12, 2021.
[5] M. I. Rosli, S. C. Alih, and M. Vafaei, “Influence of the Malaysia’s National Annex for Seismic Design on the size and reinforcement weight of low-rise buildings,” IOP Conference Series: Earth and Environmental Science, vol. 1022, no. 1, p. 012042, 2022.
[6] S. N. A. Saruddin and F. M. Nazri, “Fragility curves for low- and mid-rise buildings in Malaysia,” Procedia Engineering, vol. 125, pp. 873–878, 2015.
[7] A. Tena-Colunga, H. Hernández-Ramírez, and R. G. Olvera-Simental, “Resilient seismic design of steel frames with hysteretic fuses in a code-oriented format,” Journal of Building Engineering, vol. 32, p. 101768, 2020.
[8] R. N. White and P. Yanev, Why Buildings Fall Down: How Structures Fail, 2nd ed. New York, NY, USA: W. W. Norton & Company, 2020.
[9] S. Eshghi and M. M. Maddah, “A study on influencing factors for simplified seismic collapse risk assessment of steel moment-resisting frames with intermediate ductility,” International Journal of Structural Integrity, vol. 11, no. 4, pp. 515–533, 2020.
[10] S. Rajkumari, K. Thakkar, and H. Goyal, “Fragility analysis of structures subjected to seismic excitation: A state-of-the-art review,” Structures, vol. 40, pp. 303–316, 2022.
[11] S. Jin, C. Zhai, J. Liu, D. Jiang, D. Wang, S. Wang, et al., “Seismic fragility analysis of nuclear containment structure using Bayesian logistic regression,” Soil Dynamics and Earthquake Engineering, vol. 178, p. 108435, 2024.
[12] C. Li, Y. Liu, and H.-N. Li, “Fragility assessment and optimum design of a steel–concrete frame structure with hybrid energy-dissipated devices under multi-hazards of earthquake and wind,” Engineering Structures, vol. 243, p. 112878, 2021.
[13] Z. Wang, N. Pedroni, I. Zentner, and E. Zio, “Seismic fragility analysis with artificial neural networks: Application to nuclear power plant equipment,” Engineering Structures, vol. 162, pp. 213–225, 2018.
[14] S. I. S. Mustorpha, S. W. Ahmad, M. A. A. Kamarudin, H. A. Alsakkaf, and O. Shafiq, “Advancements in earthquake research and seismic risk analysis: An in-depth review centered on Malaysia,” Journal of Advanced Research in Applied Sciences and Engineering Technology, vol. 63, no. 2, pp. 196–206, 2025.
[15] N. Giordano, F. De Luca, and A. Sextos, “Empirical fragility functions for Nepali highway bridges affected by the 2015 Gorkha earthquake,” Bulletin of Earthquake Engineering, vol. 19, no. 15, pp. 6445–6471, 2021.
[16] K. Bakalis and D. Vamvatsikos, “Seismic fragility functions via nonlinear response history analysis,” Journal of Structural Engineering, vol. 144, no. 10, p. 04018181, 2018.
[17] D. Vamvatsikos and C. A. Cornell, “Incremental dynamic analysis,” Earthquake Engineering & Structural Dynamics, vol. 31, no. 3, pp. 491–514, 2002.
[18] S. S. B. Sai Kumar, G. V. Rama Rao, and P. Markandeya Raju, “Seismic fragility analysis of regular and setback RCC frames – a few hypothetical case studies,” Asian Journal of Civil Engineering, vol. 17, no. 5, pp. 551–569, 2016.
[19] R. Bhasker and A. Menon, “A seismic fragility model accounting for torsional irregularity in low-rise non-ductile RC moment-resisting frames,” Earthquake Engineering & Structural Dynamics, vol. 51, no. 4, pp. 912–934, 2022.
[20] D.-S. Moon, Y.-J. Lee, and S. Lee, “Fragility analysis of space reinforced concrete frame structures with structural irregularity in plan,” Journal of Structural Engineering, vol. 144, no. 8, p. 04018096, 2018.
[21] D. Forcellini, “Analytical fragility curves of shallow-founded structures subjected to soil-structure interaction (SSI) effects,” Soil Dynamics and Earthquake Engineering, vol. 138, p. 106487, 2020.
[22] F. Cavalieri, A. A. Correia, H. Crowley, and R. Pinho, “Dynamic soil-structure interaction models for fragility characterisation of buildings with shallow foundations,” Soil Dynamics and Earthquake Engineering, vol. 132, p. 106004, 2020.
[23] M. S. Kirçil and Z. Polat, “Fragility analysis of mid-rise R/C frame buildings,” Engineering Structures, vol. 28, no. 9, pp. 1335–1345, 2006.
[24] J. W. Baker and C. A. Cornell, “A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon,” Earthquake Engineering & Structural Dynamics, vol. 34, no. 10, pp. 1193–1217, 2005.
[25] K. Porter, R. Kennedy, and R. Bachman, “Creating fragility functions for performance-based earthquake engineering,” Earthquake Spectra, vol. 23, no. 2, pp. 471–489, 2007.
[26] M. Shinozuka, M. Q. Feng, J. Lee, and T. Naganuma, “Statistical analysis of fragility curves,” Journal of Engineering Mechanics, vol. 126, no. 12, pp. 1224–1231, 2000.
[27] J. W. Baker, “Efficient analytical fragility function fitting using dynamic structural analysis,” Earthquake Spectra, vol. 31, no. 1, pp. 579–599, 2015.
[28] H. Dabiri, A. Faramarzi, A. Dall’Asta, E. Tondi, and F. Micozzi, “A machine learning-based analysis for predicting fragility curve parameters of buildings,” Journal of Building Engineering, vol. 62, p. 105367, 2022.
[29] J. Kiani, C. Camp, and S. Pezeshk, “On the application of machine learning techniques to derive seismic fragility curves,” Computers & structures, vol. 218, pp. 108–122, 2019.
[30] K. Korkmaz, “Evaluation of seismic fragility analyses,” in Proceedings of the 14th World Conference on Earthquake Engineering, China, Beijing, China, 2008.
[31] ETABS, version 21.0.0. Walnut Creek, CA, USA: Computers and Structures, Inc., 2023.
[32] M. M. Kassem, F. M. Nazri, E. N. Farsangi, and B. Ozturk, “Development of a uniform seismic vulnerability index framework for reinforced concrete building typology,” Journal of Building Engineering, vol. 47, p. 103838, 2022.
[33] MATLAB, version R2022b. Natick, MA, USA: The MathWorks, Inc., 2022.
[34] Department of Mineral and Geoscience Malaysia, Malaysia Seismic Disaster Zone Map for Geodisaster Management. Putrajaya, Malaysia, 2018.
[35] N. Ahmad, A. Shahzad, Q. Ali, M. Rizwan, and A. N. Khan, “Seismic fragility functions for code compliant and non-compliant RC SMRF structures in Pakistan,” Bulletin of Earthquake Engineering, vol. 16, no. 10, pp. 4675–4703, 2018.
[36] S. Babaei and F. Karimi Ghaleh Jough, “A comprehensive evaluation of tuned vertical isolation system for seismic risk mitigation,” Journal of Applied Engineering Sciences, vol. 14, no. 27, pp. 27–34, 2024.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
