1.

Dynamic Effect of Cushion Part of Wheeled Vehicles on Their Steerability 
B. Sokil, O. Lyashuk, M. Sokil, P. Popovich, Y. Vovk and O. Perenchuk
DOI: https://doi.org/10.15282/ijame.15.1.2018.1.0380 

 4880

2.

Experimental Studies on Magnetorheological Brake for Automotive Application 
S. R. Patil and S. M. Sawant
DOI: https://doi.org/10.15282/ijame.15.1.2018.2.0381 

 4893

3.

Graphene Oxide as An Efficient Photocatalyst For Photocatalytic Reduction of CO2 Into Solar Fuel
N. Shehzad, K. Johari, T. Murugesan and M. Tahir
DOI: https://doi.org/10.15282/ijame.15.1.2018.3.0382

 4909

4.

Improvement in Steering Performance by Push-Pull Operation in Car Driving
S. Kajiwara
DOI: https://doi.org/10.15282/ijame.15.1.2018.4.0383

4919 

5.

Investigating Machinability in Hard Turning of AISI 52100 Bearing Steel Through Performance Measurement: QR, ANN and GRA Study
A. Panda, A. K. Sahoo, I. Panigrahi and A. K. Rout
DOI: https://doi.org/10.15282/ijame.15.1.2018.5.0384

4935 

6.

Performance Enhancement of Internal Combustion Engine Using Weight Reduction Approach 
H. J. Parekh, B. M. Ramani and C. J. Parekh
DOI: https://doi.org/10.15282/ijame.15.1.2018.6.0385

4962 

7.

Enhanced Gases Separation of Cellulose Acetate Membrane Using N-Methyl-1-2 Pyrrolidone as Fabrication Solvent 
M. Mubashir, Y. Y. Fong, C. T. Leng and L. K. Keong
DOI: https://doi.org/10.15282/ijame.15.1.2018.7.0386

4978 

8.

Formation of Ultrathin Film Between Two Molecularly Smooth Surfaces
M. F. Abd Al-Samieh
DOI: https://doi.org/10.15282/ijame.15.1.2018.8.0387

 4987

9.

Variation of Drag Coefficient, Wall Static Pressure and Secondary Flow Over Passenger Car
Ajitanshu Vedrtnam and Dheeraj Sagar
DOI: https://doi.org/10.15282/ijame.15.1.2018.9.0388

5002 

10.

Implementation of Safety Performance Framework (SPF) In Process Industries to Avoid Disasters
M. Y. Shamim, A. Buang, A. M. Shariff and H. Anjum
DOI: https://doi.org/10.15282/ijame.15.1.2018.10.0389

 5022

11.

Composition and Stoichiometry Effects of Biogas as Fuel in Spark Ignition Engine 
C. Mokrane, B. Adouane and A. Benzaoui  
DOI: https://doi.org/10.15282/ijame.15.1.2018.11.0390

 5036

12.

Novel Automated Manual Transmission Gear-Shift Map Modelling Based on Throttle Position
G. Singh, M. Sharma and A. P. Singh
DOI: https://doi.org/10.15282/ijame.15.1.2018.12.0391

 5053

13.

Integrated Safety and Process Optimization Approach for Ammonia Synthesis Loop
M. Athar, A. M. Shariff, A. Buang and D. Zaini
DOI: https://doi.org/10.15282/ijame.15.1.2018.13.0392

 5074

14.

The Performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 Separation 
P.S. Murugiah, P.C. Oh and K.K. Lau
DOI: https://doi.org/10.15282/ijame.15.1.2018.14.0393

 5086

15.

Analysis of EGR Coupled Less Heat Rejection Model of Diesel Engine with Blends of Jatropha Biodiesel, Diesel and Diethyl Ether: An Experimental Approach
K. V. Krishna, G. R. K. Sastry and M. V. S. M. Krishna
DOI: https://doi.org/10.15282/ijame.15.1.2018.15.0394

 5097

16.

Comparative Analysis on Performance and Emission Characteristic of Diesel Engine Fueled with Heated Coconut Oil and Diesel Fuel
A.T. Hoang, M.M. Noor and X.D. Pham
DOI: https://doi.org/10.15282/ijame.15.1.2018.16.0395

 5110

17.

Effects of Amine-Functionalization on Mixed Matrix Membranes Encompassing of T-Type Zeolite and 6FDA-based Polyimide for Separation of CO2 from CH4
Norwahyu Jusoh, Y. F. Yeong, K. K. Lau and A. M. Shariff
DOI: https://doi.org/10.15282/ijame.15.1.2018.17.0396

 5126

18.

Effect of Volume of Gold Chloroauric Acid on Size, Shape and Stability of Biosynthesized AuNPs using Aqueous Elaeis guineensis (Oil Palm) Leaves Extract
T. Ahmad, M. A. Bustam, M. Irfan, M. Moniruzzaman, H. M. A. Asghar and S. Bhattacharjee
DOI: https://doi.org/10.15282/ijame.15.1.2018.18.0397

 5135