Volume 14 - Issue 4

(December 2017)

*Click on the page number to download the paper in PDF.

No	Title and Authors	Page
1	Experiments on the wear characteristics of A356 MMNCs fabricated using ultrasonic cavitation Suneel Donthamsetty and Penugonda Suresh Babu DOI: https://doi.org/10.15282/ijame.14.4.2017.1.0362	4589
2	New design concept of a tank made of plastic material for firefighting vehicle M. Collotta and L. Solazzi DOI: https://doi.org/10.15282/ijame.14.4.2017.2.0363	4603
3	Longitudinal vehicle dynamics model for construction machines with experimental validation A. Alexander and A. Vacca DOI: https://doi.org/10.15282/ijame.14.4.2017.3.0364	4616
4	Analysis of hydrogen enriched treble biofuel blended with diesel for performance, emission and combustion characteristics on CI engine H.N. Md. Fakhruddin1, Mohammed Yousuf Ali2 and M. Manzoor Hussain DOI: https://doi.org/10.15282/ijame.14.4.2017.4.0365	4634
5	Energy saving technologies for urban bus transport A. Hnatov, Shch. Arhun and S. Ponikarovska DOI: https://doi.org/10.15282/ijame.14.4.2017.5.0366	4649
6	Physico-mechanical properties of coir and jute fibre reinforced hybrid polyethylene composites Shakil Ahmed, Ashraful Ahsan and Mahbub Hasan DOI: https://doi.org/10.15282/ijame.14.4.2017.6.0367	4665
7	Analysis of a diesel engine fuelled with jojoba blend and coir pith producer gas S. K. Nayak and P. C. Mishra DOI: https://doi.org/10.15282/ijame.14.4.2017.7.0368	4675
8	A computational approach for optimizing vehicles’ interior noise and vibration Adel Mohammed Al-Dhahebi, Ahmad Kadri Junoh, Zamri Mohamed and Wan Zuki Azman Wan Muhamad DOI: https://doi.org/10.15282/ijame.14.4.2017.8.0369	4690
9	Cooling effect potential from liquefied petroleum gas flow in the fuel line of vehicle M. Setiyo, D.R.B. Syaka, B. Waluyo, N. Hamidi, and B.F.T. Kiono DOI: https://doi.org/10.15282/ijame.14.4.2017.9.0370	4704
10	Hydrodynamic performance of cylindrical floating breakwater in waves S.F. Abdullah, A. Fitriadhy, M. Hairil1 and A. Jusoh DOI: https://doi.org/10.15282/ijame.14.4.2017.10.0371	4715
11	Analysis and study of the influence of the geometrical parameters of mini unmanned quad-rotor helicopters to optimise energy saving I. Penkov and D. Aleksandrov DOI: https://doi.org/10.15282/ijame.14.4.2017.11.0372	4730
12	Dry sliding wear behaviour of ultrasonically-processed AA6061/SiCp nanocomposites A. Prasad Reddy, P. Vamsi Krishna and R. N. Rao DOI: https://doi.org/10.15282/ijame.14.4.2017.12.0373	4747
13	Differential air/fresh charge demand, supply and utilisation in two-stroke spark ignition engines M. N. Lawal, M. S. Abolarin, A. Nasir and A. N. Musa DOI: https://doi.org/10.15282/ijame.14.4.2017.13.0374	4769
14	MHD slip flow and heat transfer of Casson nanofluid over an exponentially stretching permeable sheet Sudipta Ghosh and Swati Mukhopadhyay DOI: https://doi.org/10.15282/ijame.14.4.2017.14.0375	4785
15	Energy analysis of a stepped cascade solar still connected to photovoltaic thermal collector E. Hedayati-Mehdiabadi, F. Sarhaddi and F. Sobhnamayan* DOI: https://doi.org/10.15282/ijame.14.4.2017.15.0376	4805
16	Configuring robot work cell based on a multi-shaped layout approach N. S. Osman, M. A. A. Rahman, A. A. Abdul Rahman, S. H. Kamsani, E. Mohamad, B. M. B. Mohamad, Z. A. Zaini and M. F. A. Rahman DOI: https://doi.org/10.15282/ijame.14.4.2017.16.0377	4826
17	Thermal performance of heat sink with fluid pockets for high power light emitting diode Sangmesh Gopalakrishna Keshava Narayana, Manjunath Shiraganhalli Honnaiah, Krishna Venkatesh and Keertishekar Mysore Siddalingappa DOI: https://doi.org/10.15282/ijame.14.4.2017.17.0378	4846
18	Impact of nano additives on electroless nickel phosphorous (EN-P) coating M. Mumtaz Mirza, Elansezhian Rasu and Anjali Desilva DOI: https://doi.org/10.15282/ijame.14.4.2017.18.0379	4863