Improving Car Fuel Efficiency by Optimising Transmission Parameters

Authors

  • S. A. Gorozhankin Faculty of Mechanical, Donbass National Academy of Civil Engineering and Architecture, 286123 Makeevka
  • A. D. Bumaga Faculty of Mechanical, Donbass National Academy of Civil Engineering and Architecture, 286123 Makeevka
  • N. V. Savenkov Faculty of Mechanical, Donbass National Academy of Civil Engineering and Architecture, 286123 Makeevka

DOI:

https://doi.org/10.15282/ijame.16.3.2019.14.0526

Keywords:

Fuel economy, driving cycle, unsteady mode, optimization, gear ratios, torque

Abstract

The theoretical and experimental studies of the car power unit functioning at unsteady modes have been conducted. The experimental studies have been conducted using the test stand for measuring engine performance. In addition, the measurements of the parameters of the power unit of the category N1 vehicle under natural conditions (the road tests in the modes of standardized driving cycles) have been made. The aim of the work is increasing the fuel efficiency of the vehicles under operating conditions. For this purpose, the transmission parameters have been optimised for the conditions of the vehicle driving in the standardized NEDC and WLTC driving cycles. The research results enable to give recommendations on improving both the design of the power unit and its operating modes in operation.

Downloads

Published

2019-10-07

How to Cite

[1]
S. A. Gorozhankin, A. D. Bumaga, and N. V. Savenkov, “Improving Car Fuel Efficiency by Optimising Transmission Parameters”, Int. J. Automot. Mech. Eng., vol. 16, no. 3, pp. 7019–7033, Oct. 2019.

Issue

Vol. 16 No. 3 (2019): July-Sept

Section

Articles

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.