Vol 11 - No. 2 (June 2017)

No	Title and Authors	Page
1	The effect of manpower factor on semiautomatic production line completion time: A system dynamics approach A. A. Ahmarofi, N. Z. Abidin and R. Ramli DOI: https://doi.org/10.15282/jmes.11.2.2017.1.0235	2567
2	Effects of injection moulding process parameters on impact strength of polypropylene-hydroxyapatite biocomposite M. Manoraj and M. N. M. Ansari DOI: https://doi.org/10.15282/jmes.11.2.2017.2.0236	2581
3	Bio-corrosion of carbon steel by sulfate reducing bacteria consortium in oil and gas pipelines A. Abu Bakar, M. K. F. Mohd Ali, N. Md Noor, N. Yahaya, M. Ismail and A. Abdullah DOI: https://doi.org/10.15282/jmes.11.2.2017.3.0237	2592
4	Seakeeping performance of a rounded hull catamaran in waves using CFD approach A. Fitriadhy, N.S. Razali and N. AqilahMansor DOI: https://doi.org/10.15282/jmes.11.2.2017.4.0238	2601
5	Oscillatory flow reactor design for biological process N. N. Azaini and N. Masngut DOI: https://doi.org/10.15282/jmes.11.2.2017.5.0239	2615
6	Parametric study on effect of pinch and approach points on heat recovery steam generator performance at a district cooling system Adzuieen Nordin and Mohd Amin Abd Majid DOI: https://doi.org/10.15282/jmes.11.2.2017.6.0240	2626
7	Crushing behaviour of composite square honeycomb structure: a finite element analysis Z. Ansari Tan C.W., M.R.M.Rejab, D. Bachtiar¹, J.Siregar, M.Y.M.Zuhri, N.S.D.M. Marzuki DOI: https://doi.org/10.15282/jmes.11.2.2017.7.0241	2637
8	Curing behaviour of unsaturated polyester resin and interfacial shear stress of sugar palm fibre N. Mohd Nurazzi, A. Khalina, S. M. Sapuan, A. M. Dayang Laila and M. Rahmah DOI: https://doi.org/10.15282/jmes.11.2.2017.8.0242	2650
9	Large eddy simulation of wind flow through an urban environment in its full-scale wind tunnel models E. Reda, Rozli Zulkifliand Z. Harun DOI: https://doi.org/10.15282/jmes.11.2.2017.9.0243	2665
10	Porous titanium alloy/hydroxyapatite composite using powder compaction route Amir Arifin, Abu Bakar Sulong, Lee Choy Fun, Gunawan and Irsyadi Yani DOI: https://doi.org/10.15282/jmes.11.2.2017.10.0244	2679
11	Design optimization of a b-pillar for crashworthiness of vehicle side impact A. E. Ikpe, I. B. Owunna and P. Satope DOI: https://doi.org/10.15282/jmes.11.2.2017.11.0245	2693
12	Aerodynamic prediction of helicopter rotor in forward flight using blade element theory M.F. Yaakub, A.A. Wahab, A. Abdullah, N.A.R. Nik Mohd and S.S. Shamsuddin DOI: https://doi.org/10.15282/jmes.11.2.2017.12.0246	2711
13	Effects of ambient temperature and injection pressure on biodiesel ignition delay Norrizam Jaat, Amir Khalid, Adiba Rhaodah Andsaler, Azwan Sapit, Azahari Razali and Mariam Basharie DOI: https://doi.org/10.15282/jmes.11.2.2017.13.0247	2723
14	Effect of ethanol addition on the performance and exhaust emissions of a spark ignition engine Mega Nur Sasongko and Widya Wijayanti DOI: https://doi.org/10.15282/jmes.11.2.2017.14.0248	2734
15	Effects of temperature on the surface and subsurface of Al-Mg-Si welded joints Muhamad Hellmy Hussin and Nur Azida Che Lah DOI: https://doi.org/10.15282/jmes.11.2.2017.15.0249	2743
16	Thermal phenomenon of glass fibre composite under tensile static and fatigue loading Jefri Bale, Emmanuel Valot, Olivier Polit, Claude Bathias, Martine Moninand Tresna Soemardi DOI: https://doi.org/10.15282/jmes.11.2.2017.16.0250	2755
17	Study of X-phase formation on Cu-Al-Ni shape memory alloys with Ti addition Wee Ying Ci, Tuty Asma Abu Bakar, Esah Hamzahand Safaa Najah Saud DOI: https://doi.org/10.15282/jmes.11.2.2017.17.0251	2770

Vol 11 - No. 2 (June 2017)

sidebar